I have a gigabit AEBS, that only gets 12 MB/sec MAX when I transfer files between my 2 macs via ethernet cable. I get 45 MB/sec MAX when I connect the 2 macs directly to each other via ethernet cable. What the hell is going on here? is this typical of the AEBS? I would expect these numbers from the 100Mbps AEBS, but not the gigabit version.
View 21 RepliesAm seriously considering the new AEBS but seems some confusion over whether the ports offer gigabit Ethernet, can someone with the router confirm or deny this? Also how is the range compared with similar N routers?
View 1 Replies View RelatedJust wanted to share how well the Monoprice USB 2 gigabit ethernet adapter works on the new MacBook Air. It costs only $20. The speed I get is 30Mbyte/s over my wired home network. Here is the link: [URL]. For Mac OS X, you must use the drivers on the enclosed mini-CD as the default Apple ones do not work. For Bootcamp/Windows 7, download from [URL] the chip manufacturer. Works great and much faster than Apple's fast Ethernet adapter or WLAN.
View 5 Replies View Relatedvideo card would be the first place to start for better internet rendering--what's the most logical one i should install?
View 2 Replies View RelatedI have my iMac (2009 model) and MacBook Pro (2011) connected to a D-Link Gigabit switch using CAT5E cables.Switch is connected to my router using gigabit connection. Switch is showing gigabit connections for the link to the router and the link to the MacBook Pro (MBP). Link to the iMac only shows 100 mbit connection.
Cables are ok since behaviour is exactely the same when I change/swap iMac and MBP.
When I go the network/ethernet settings in iMac and change from "automatic" to "manual" and select gigabit, the iMac claims there is no network cable connected at all. When changing back to "automatic", connection is re-established but again with 100mbit connection only.
[code]...
Info:iMac (21.5-inch Late 2009), Mac OS X (10.6.8)
So with the lack of Gigabit ethernet options on the Macbook Air, I'm kinda hoping that some bright spark on here is going to shower me with suggestions on what 3rd party adaptors are available/been used. I've had a real good hunt around, and the only adaptor which I can find that people have got excited about (back in 2009!) was the Buffalo one... Annoyingly, this is pretty much nowhere to be found. The one thing stopping me from getting an MBA is the gig-e problem. As I use time-machine for backups, and transfer relatively large files around between offices<->datacentres<->home, it's rather important.
View 24 Replies View RelatedIs there such a thing for Macs? Can the network card be upgraded? I just browsed over a 100 on NewEgg and not a single one mentions OSX support. Does this work like alot of accessories where you just plug in (via PCI heh) and it just works or im stuck with 10/100? (all equipment in the house is N with Gigabit so if I could turn the PowerMac G5 into a Gigabit Machine, I could network files SOO much faster, other wise, its just a bottle neck)
View 11 Replies View RelatedDespite the prevalence of OS X in the Mac market place now, I've been unable to get OS X versions of some applications I use now and then, and a few games whose source-code no-one seems even willing to acknowledge ever existed, so I have an older blue and white G3 (300mhz) lying around. However, I no longer have any monitors I can really reliably use with it, so I was thinking I'd use VNC to remote-desktop into it instead. I got this all set-up, and it works okay-ish, but the main issue is speed. I'm connecting to it via a direct connection to my Mac Pro, which of course has gigabit ethernet, so I figured it might be possible to pick up a gigabit ethernet card somewhere, but with OS 9 being so old there is the issue of drivers. I'm hoping someone here might know where I can find a gigabit ethernet card for my G3? I may try firewire to see if that works at all, but I suspect that gigabit ethernet would be better overall if I can get that.
View 6 Replies View RelatedIn my house there is a wired and wireless connection.
On my macbook (2008 Al) the port on the side is gigabit internet.
In my house the cables are all ethernet (blue cables). These do not fit in the port on the side. Is there a way or an adapter to convert the ethernet to a gigabit connection?
Our still photographic studio has a range of MACs all connected via a gigabit D-Link switch to a series of Buffalo NAS raids. Wiring is CAT5e, all devices have gigabit ethernet cards and the link lights on the switch suggest that all devices are connected at that speed. We currently get file transfer rates of between 5 and 12 MB/s depending on network traffic. We would like to upgrade our NAS to a NAS/SAN, preferably using the existing wiring (and avoid the expense of Fibrenet). 50 or 60MB/s would be great if possible. Any suitable architecture and Hardware. Cable lengths are a maximum of 30 metres.
Info:
Mac Pro, Mac OS X (10.6)
I just got a MacPro at work and I will use this machine in conjunction with my Powerbook a lot. I realized that I could connect the Powerbook to the MacPro with an ethernet cable, given that the MacPro has two ethernet ports. I turned on internet sharing and I am able to browse from the Powerbook and connect to the MacPro as a server. I expected near Gigabit connection speeds when transfering files between machines
View 7 Replies View RelatedI have noticed that about once a day at around 9pm or so my network goes out for 45 seconds to a minute and then comes back on.
I know this is weird and maybe its something we are doing but has anyone ever heard of this issue?
Is there a fix for it?
Anyone have good luck with a gig-e->USB adapter? I'm planning to get a MBA and cinema display, but I need the use of gigabit ethernet. Will it work well if I plug it into the USB hub on the display and will I be able to max out the USB connection?
View 8 Replies View RelatedWill my thunderport work with the new gigabit ethernet adaoptor ?
Info:
MacBook Air, Mac OS X (10.7.4)
I've been looking around for an additional gigabit ethernet card for my single 1.8 G5 processor. I've read many of the postings but they relate to the 1.8 dual processor with pci-x. I only have pci slots (4 ram slot model - late 2004 revision) and am stumped.
The DGE-528T looked like it may work, then I read it hasnt been confirmed as working for the G5 sinle processor as of yet.
The next card that may work is the Intel PRO/1000MT.
Information:
Single processor G5
Mac OS X (10.3.9)
i share a house with my brother, lucky me He got a PC with Vista in his room. I got a lovely imac in my room. He gets the broadband cable direct into his room. It averages 40 mbps download , 1.67 upload. We use a wireless Netgear router one thats suppose to handle N wireless and i pick the wireless up on the airport extreme in my imac. Unfortunately i only get about 12 mbps download , 1.20 upload, even though i'm only in the next room. We both play WOW online. It works so much better on his PC cos of the internet speed. Could I use a gigabit ethernet connection between the PC and imac, to share the internet and still play WOW independently?
View 1 Replies View RelatedHas anyone had issues upgrading Thunderbolt to 1.2.1 to support the new gigabit Ethernet adapter? I have tried about 6 times to do the update but my ethernet adapter still isn't being detected.
Info:
MacBook Air, Mac OS X (10.7.4)
I'm a PC guy (unfortunately), and I wanted to get my wife (graphic designer) a Mac present for our 3 year wedding anniversary (maybe a bad choice). As a cheep axx i looked on eBay for best deals... and happen to stumble upon an old G4 (Gigabit Ethernet) Dual 500MHz tower. I understand that is a old model, but the budget constrains gave me a no better choice... $300-400. For the first Apple it is a start.To make it up i got her a 23" Cinema Display.My dilemma as you see is the old vs new technology. I have not yet received the merchandise, but as i read I'm up for a surprise.
1. Do i need a power adapter for the display?
2. Do i need a ADC converter (or something like it)?
3. What (cheep) Graphic card will be a plausible fit to avoid conversions?
4. Will that card work with my motherboard (if there is one inside lol)
So far browsing i got:
Recomendations
RADEON 9800 Series
Requirements: Power Mac G4 or G5 with NVIDIA graphics card or ATI Radeon 7500 or better graphics card Limitations: The Power Mac G4 Cube computer must have a Nvidia Geforce 2MX graphics card to be compatible with the Apple Cinema Display HD or Apple Cinema Display (20-inch). he Power Mac G4 - (Gigabit Ethernet) video card does not support the Apple Cinema Display HD or Apple Cinema Display (20-inch) unless the original video card is updated to one that meets the specification for the display.
When I use Thunderbolt to Gigabit Ethernet Adapter in win7, it cannot be recognized by win7, how to fix it?
Info:
MacBook Air, Windows7
As the new MBA has an accessory (Thunderbolt ethernet adapter), will its transmission speed be significantly faster than using an old USB ethernet adapter in one of the new MBA's USB ports?
Info:
MacBook Air (Late 2008), Mac OS X (10.7.4)
I just picked up a Synology DS211 NAS and have been using my roomates' wireless router to connect to my 15" MBP unibody (OSX 10.6.5) and it's been working just fine but I need a faster connection to the NAS for the work that I do. I succesfully got the NAS to connect directly to the MBP through ethernet but I lost my wireless connection to the router.
View 5 Replies View RelatedI want to put all my media (mainly music and movies) on an external hard drive.
It will be connected to MacMini media server using Plex. Then I wish to share to a MBP over the network (using Airport Extreme Base station).
Question is what is faster?:
1) a Firewire 800 hard drive connected directly to the MacMini then shared over the network?
2) or a Network hard drive connected directly to the Airport Extreme via CAT5e/CAT6, then shared over the network?
Given the size of some video files I have (High def movies 4GB+) I'd like the smoothest and fastest transfer rate.
Really confused welcome any suggestions!
I tried searching on macrumors and google and found mixed info on how to do this. My gf recently got a new white macbook and is needing to get her files from her pc transferred over to the macbook. There will probably be over 50 gigs of info. Could someone link me to a guide in doing this step by step in precise detail?
View 1 Replies View RelatedI have an ethernet cable. i have an alu macbook. i have an iMac. i need to transfer files between the two. tried connecting the ethernet cables. on the macbook it says "ethernet cable not plugged in"
on the iMac it says "ethernet cable not plugged in".
i know the ethernet cable works because i brought my macbook up to my router and used the ethernet cable to connect to the internet. it is Cat5 or whatever. i've tried everything static IP addresses. restarting. replugging. over and over and over. no luck. the macs just pretend there is no ethernet cable plugged in. tried DHCP. tried manually. but it works when i connect my macbook to my modem.
i've tried everything. i've googled, i've mroogled. nothing works. i spend two hours trying to work this out myself before coming here. every single webpage online just says "oh just turn on file sharing LOL then it works" not for me it doesn't. i've tried that. i've tried it over and over and over again. it doesn't work for me. still won't recognize.
i'd use wireless connection to transfer but that'd take like 20+ hours to send 60GB+ of data. too long (iMac is not at my house) are ethernet cables just fail? this is a BRAND NEW 20 inch imac and a aluminum macbook from 2008.
I created an access point from a router. My question is if I can get a faster connection to devices near to the access point with the direct connection or will a direct connection not work with an access point?
Info:
MacBook Pro, Mac OS X (10.7.3)
I have recently had to stop using my wireless router and connect directly from my modem to the WAN port on my computer. However, I can only achieve an internet connection when I direct connect into my PowerBook G4. When I try to connect into my iMac, I get nothing.
View 2 Replies View RelatedI currently have an O2 wireless ADSL2 Modem connected to my AEBS. I've disabled the Wi-Fi signal of the wireless box since its a G router and i'd rather be using the AEBS for its N signals. I'm wondering if i should connect the O2 box to the ethernet port of the AEBS or WAN port whilst in bridge mode? or it doesn't matter?
View 3 Replies View RelatedWhat I want to be able to do is plug into the Ethernet ports on this AEBS, and I want that to use wireless to the other wireless router to give me network access. Here is the deal, I have a computer that doesn't have wireless network on it, so it's only Ethernet. I have the AEBS at my desk, and I want to connect the hardwired computer into the AEBS. I want the AEBS to then wirelessly connect that computer that is hard-wired to the network...
View 2 Replies View RelatedI'm sure there is a few people on here that have made the swap - is it worth it? Is the difference in speed noticible to warrant an upgrade.
My current setup:
2.4 MBPu
Mac Mini (coming soon)
Dell Inspiron
Canon Printer
Touch
Slingbox (hardwired to AEBS)
AE (old school version)
WD 1TB external (connected to AEBS via usb)
All currently connected to a AEBS wireless.
software is upto date yet my macbook gets slower and slower by the day
Info:
MacBook Pro
