Am seriously considering the new AEBS but seems some confusion over whether the ports offer gigabit Ethernet, can someone with the router confirm or deny this? Also how is the range compared with similar N routers?
View 1 Replies
I have a gigabit AEBS, that only gets 12 MB/sec MAX when I transfer files between my 2 macs via ethernet cable. I get 45 MB/sec MAX when I connect the 2 macs directly to each other via ethernet cable. What the hell is going on here? is this typical of the AEBS? I would expect these numbers from the 100Mbps AEBS, but not the gigabit version.
View 21 Replies View RelatedJust wanted to share how well the Monoprice USB 2 gigabit ethernet adapter works on the new MacBook Air. It costs only $20. The speed I get is 30Mbyte/s over my wired home network. Here is the link: [URL]. For Mac OS X, you must use the drivers on the enclosed mini-CD as the default Apple ones do not work. For Bootcamp/Windows 7, download from [URL] the chip manufacturer. Works great and much faster than Apple's fast Ethernet adapter or WLAN.
View 5 Replies View Relatedvideo card would be the first place to start for better internet rendering--what's the most logical one i should install?
View 2 Replies View RelatedI have my iMac (2009 model) and MacBook Pro (2011) connected to a D-Link Gigabit switch using CAT5E cables.Switch is connected to my router using gigabit connection. Switch is showing gigabit connections for the link to the router and the link to the MacBook Pro (MBP). Link to the iMac only shows 100 mbit connection.
Cables are ok since behaviour is exactely the same when I change/swap iMac and MBP.
When I go the network/ethernet settings in iMac and change from "automatic" to "manual" and select gigabit, the iMac claims there is no network cable connected at all. When changing back to "automatic", connection is re-established but again with 100mbit connection only.
[code]...
Info:iMac (21.5-inch Late 2009), Mac OS X (10.6.8)
So with the lack of Gigabit ethernet options on the Macbook Air, I'm kinda hoping that some bright spark on here is going to shower me with suggestions on what 3rd party adaptors are available/been used. I've had a real good hunt around, and the only adaptor which I can find that people have got excited about (back in 2009!) was the Buffalo one... Annoyingly, this is pretty much nowhere to be found. The one thing stopping me from getting an MBA is the gig-e problem. As I use time-machine for backups, and transfer relatively large files around between offices<->datacentres<->home, it's rather important.
View 24 Replies View RelatedIs there such a thing for Macs? Can the network card be upgraded? I just browsed over a 100 on NewEgg and not a single one mentions OSX support. Does this work like alot of accessories where you just plug in (via PCI heh) and it just works or im stuck with 10/100? (all equipment in the house is N with Gigabit so if I could turn the PowerMac G5 into a Gigabit Machine, I could network files SOO much faster, other wise, its just a bottle neck)
View 11 Replies View RelatedDespite the prevalence of OS X in the Mac market place now, I've been unable to get OS X versions of some applications I use now and then, and a few games whose source-code no-one seems even willing to acknowledge ever existed, so I have an older blue and white G3 (300mhz) lying around. However, I no longer have any monitors I can really reliably use with it, so I was thinking I'd use VNC to remote-desktop into it instead. I got this all set-up, and it works okay-ish, but the main issue is speed. I'm connecting to it via a direct connection to my Mac Pro, which of course has gigabit ethernet, so I figured it might be possible to pick up a gigabit ethernet card somewhere, but with OS 9 being so old there is the issue of drivers. I'm hoping someone here might know where I can find a gigabit ethernet card for my G3? I may try firewire to see if that works at all, but I suspect that gigabit ethernet would be better overall if I can get that.
View 6 Replies View RelatedIn my house there is a wired and wireless connection.
On my macbook (2008 Al) the port on the side is gigabit internet.
In my house the cables are all ethernet (blue cables). These do not fit in the port on the side. Is there a way or an adapter to convert the ethernet to a gigabit connection?
Our still photographic studio has a range of MACs all connected via a gigabit D-Link switch to a series of Buffalo NAS raids. Wiring is CAT5e, all devices have gigabit ethernet cards and the link lights on the switch suggest that all devices are connected at that speed. We currently get file transfer rates of between 5 and 12 MB/s depending on network traffic. We would like to upgrade our NAS to a NAS/SAN, preferably using the existing wiring (and avoid the expense of Fibrenet). 50 or 60MB/s would be great if possible. Any suitable architecture and Hardware. Cable lengths are a maximum of 30 metres.
Info:
Mac Pro, Mac OS X (10.6)
I just got a MacPro at work and I will use this machine in conjunction with my Powerbook a lot. I realized that I could connect the Powerbook to the MacPro with an ethernet cable, given that the MacPro has two ethernet ports. I turned on internet sharing and I am able to browse from the Powerbook and connect to the MacPro as a server. I expected near Gigabit connection speeds when transfering files between machines
View 7 Replies View RelatedI have noticed that about once a day at around 9pm or so my network goes out for 45 seconds to a minute and then comes back on.
I know this is weird and maybe its something we are doing but has anyone ever heard of this issue?
Is there a fix for it?
Anyone have good luck with a gig-e->USB adapter? I'm planning to get a MBA and cinema display, but I need the use of gigabit ethernet. Will it work well if I plug it into the USB hub on the display and will I be able to max out the USB connection?
View 8 Replies View RelatedWill my thunderport work with the new gigabit ethernet adaoptor ?
Info:
MacBook Air, Mac OS X (10.7.4)
I've been looking around for an additional gigabit ethernet card for my single 1.8 G5 processor. I've read many of the postings but they relate to the 1.8 dual processor with pci-x. I only have pci slots (4 ram slot model - late 2004 revision) and am stumped.
The DGE-528T looked like it may work, then I read it hasnt been confirmed as working for the G5 sinle processor as of yet.
The next card that may work is the Intel PRO/1000MT.
Information:
Single processor G5
Mac OS X (10.3.9)
i share a house with my brother, lucky me He got a PC with Vista in his room. I got a lovely imac in my room. He gets the broadband cable direct into his room. It averages 40 mbps download , 1.67 upload. We use a wireless Netgear router one thats suppose to handle N wireless and i pick the wireless up on the airport extreme in my imac. Unfortunately i only get about 12 mbps download , 1.20 upload, even though i'm only in the next room. We both play WOW online. It works so much better on his PC cos of the internet speed. Could I use a gigabit ethernet connection between the PC and imac, to share the internet and still play WOW independently?
View 1 Replies View RelatedHas anyone had issues upgrading Thunderbolt to 1.2.1 to support the new gigabit Ethernet adapter? I have tried about 6 times to do the update but my ethernet adapter still isn't being detected.
Info:
MacBook Air, Mac OS X (10.7.4)
I'm a PC guy (unfortunately), and I wanted to get my wife (graphic designer) a Mac present for our 3 year wedding anniversary (maybe a bad choice). As a cheep axx i looked on eBay for best deals... and happen to stumble upon an old G4 (Gigabit Ethernet) Dual 500MHz tower. I understand that is a old model, but the budget constrains gave me a no better choice... $300-400. For the first Apple it is a start.To make it up i got her a 23" Cinema Display.My dilemma as you see is the old vs new technology. I have not yet received the merchandise, but as i read I'm up for a surprise.
1. Do i need a power adapter for the display?
2. Do i need a ADC converter (or something like it)?
3. What (cheep) Graphic card will be a plausible fit to avoid conversions?
4. Will that card work with my motherboard (if there is one inside lol)
So far browsing i got:
Recomendations
RADEON 9800 Series
Requirements: Power Mac G4 or G5 with NVIDIA graphics card or ATI Radeon 7500 or better graphics card Limitations: The Power Mac G4 Cube computer must have a Nvidia Geforce 2MX graphics card to be compatible with the Apple Cinema Display HD or Apple Cinema Display (20-inch). he Power Mac G4 - (Gigabit Ethernet) video card does not support the Apple Cinema Display HD or Apple Cinema Display (20-inch) unless the original video card is updated to one that meets the specification for the display.
When I use Thunderbolt to Gigabit Ethernet Adapter in win7, it cannot be recognized by win7, how to fix it?
Info:
MacBook Air, Windows7
As the new MBA has an accessory (Thunderbolt ethernet adapter), will its transmission speed be significantly faster than using an old USB ethernet adapter in one of the new MBA's USB ports?
Info:
MacBook Air (Late 2008), Mac OS X (10.7.4)
My BT Router is about, say 150M away, could I get a 100M Ethernet cable, plugged into the Router, going along the walls and then into another Router.
Then, from that Router have another 50M Ethernet cable going directly into my MacBook Pro?
So, like: ROUTER --100M-- 2nd ROUTER --50M-- MacBook Pro
Is this possible, or is 100M the end point? Can't go any further than that?
I want to put all my media (mainly music and movies) on an external hard drive.
It will be connected to MacMini media server using Plex. Then I wish to share to a MBP over the network (using Airport Extreme Base station).
Question is what is faster?:
1) a Firewire 800 hard drive connected directly to the MacMini then shared over the network?
2) or a Network hard drive connected directly to the Airport Extreme via CAT5e/CAT6, then shared over the network?
Given the size of some video files I have (High def movies 4GB+) I'd like the smoothest and fastest transfer rate.
Really confused welcome any suggestions!
I currently have an O2 wireless ADSL2 Modem connected to my AEBS. I've disabled the Wi-Fi signal of the wireless box since its a G router and i'd rather be using the AEBS for its N signals. I'm wondering if i should connect the O2 box to the ethernet port of the AEBS or WAN port whilst in bridge mode? or it doesn't matter?
View 3 Replies View RelatedWhat I want to be able to do is plug into the Ethernet ports on this AEBS, and I want that to use wireless to the other wireless router to give me network access. Here is the deal, I have a computer that doesn't have wireless network on it, so it's only Ethernet. I have the AEBS at my desk, and I want to connect the hardwired computer into the AEBS. I want the AEBS to then wirelessly connect that computer that is hard-wired to the network...
View 2 Replies View RelatedI'm getting my first Mac tomorrow, an iMac 24" 2.8. After 20 years on PCs, I'm fed up with Windows. I've been fairly methodical in going over the PC, inch by inch and file by file, to make sure everything I need is brought over and can be used on the iMac. One of the biggest problems is 15 years of documents which were prepared in WordPerfect. I understand that neither iWork or MS Office can convert them. I also heard of AbiWord, a freeware program which can view and convert almost anything. So, I have a few choices. Since I'm going through each doc to see if I even need it or want it, I can convert each one in WordPerfect after I make the decision, to an MS Doc file (MS WORD 2003, RTF, ANSI, ASCII, or other files. If I do that, will iWork be able to read the file? What would be the best format to convert it too?
Or, I can decide what to keep and bring it over in WordPerfect format. When and if I need it, I can use AbiWord to convert at that time. Of course, this means adding an application to my computer. Does iWork/Pages emulate MS Word in the ability to read and convert other formats? What is the native format for saving in iWork? Is it a .DOC file? Any suggestions for the best method for me to transfer the files to the new computer and eventually use them? Does any program Batch process the conversions? BTW: I already purchased iWork, because of my belief that its 100% compatible with MS Office, and because it appears that any type of document I want to produce can be accomplished in iWork.
I'm sure there is a few people on here that have made the swap - is it worth it? Is the difference in speed noticible to warrant an upgrade.
My current setup:
2.4 MBPu
Mac Mini (coming soon)
Dell Inspiron
Canon Printer
Touch
Slingbox (hardwired to AEBS)
AE (old school version)
WD 1TB external (connected to AEBS via usb)
All currently connected to a AEBS wireless.
I currently keep my iTunes library on an external drive, connected to my Airport Extreme. I also have another drive attached to the AEBS that I would like to back my iTunes library to.
Can this be done? I've got the full version of Super Duper which will let me back up local drives to any network drive but I can't seem to get it to back to to a network drive to a network drive.
I have 3 routers that I am networking together via an ethernet cable. I know most of you are going to jump on me and ask "why?" instead of focusing on my question, so the reason is this; I would like to have a simul cast of the wireless network for G and N. some of you already know if you have a G device on an N network, the N drops down to G speeds. we have some old laptops and iphones that don't have N but we also have a ps3 and some N macbooks. How do I get all 3 routers on the same "network"? i've managed to get all computers wired and non on the internet, but i cant get them to find each other. for example my iphone cant use apple remote on itunes because my n macbook is on the N router. so they won't "see" each other
The current config is this:
dlink router(wireless turned off) -belkin N+ router [macbook,ps3,imac etc]
-linksys g routr(dd-wrt firm) [iphones,laptop,repeater] -winblows xp box
The Ethernet cables for the 2 attached routers go to their wan ports. I've tried disabling the DHCP servers on the belkin and linksys' but still nothing.
I am looking to replace a Apple Base Station router that has seemingly been fried by lightening.Â
Are there other, less expensive options out there that are plug-n-play with PPC Macs?Â
Also, can anybody recommend a good quality ethernet surge suppressor for a router?Â
Info:
PowerBook G4 1.67 mHz 17", Mac OS X (10.5.8)
My wireless used to work throughout my whole apartment. It's a small one bedroom...then one day it only worked while I was in the room with the router close to my router. This also happens at my parent's house, my boyfriend's house, at coffee shops etc....everyone elses computer gets access just fine but mine cannot even see the access point. Any one have any idea what happened or how to fix it?
View 2 Replies View Related
