OS X :: Ethernet Cable Connecting Ethernet Port To IPhone - Feasible?
May 20, 2009
I was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
I have tried searching for a similar question but have not been able to find an exact match. I have a new MacBook, a PS3, a Virgin Mobile USB and an Ethernet cable and I thought putting them all together so I could use the PS3 online would be easy! Could someone please give me a step by step process of what I am meant to be doing.
Can I connect a wireless router to the second ethernet port of my MacPro? I have the main ethernet cord from the modem connected to my ethernet port 1, then I connected my router to my computer through ethernet 2, thinking that it would broadcast the internet connection. However, it is not working. The router is broadcasting, but the internet isn't working (and the light indicating internet connection on the router is yellow, not green). Is this something that isn't possible? Or do I need to change settings (not just plug and go)?
Two days ago my iBook G4 1Ghz started to have a big problem in turning it on: when I pushed the power button the fan started to whirl speedier than usual and nothing happened. The monitor stayed turned off and the startup "Boeing" did not sound. I tried to reset the PMU and the PRAM several times and the iBook finally turned on (I still don't know why!). I did a hardware test and no problems were detected.
Then, I connected my connection Ethernet cable and the computer crashed down. Now I am in the same situation that I've just described: I can't turn the computer on anymore and the fan starts wheeling. I also showed this problem to a local Apple center and they told me that the motherboard is dead. I am still not convinced, because one time I have been able to restart the iBook. Is the motherboard really broken?
At the moment, I have an ADSL modem/router (1 port) connected to my switch (ethernet port 1 on the server and all my clients are also connected into this same switch). ADSL router has IP address 192.168.2.222 (assigned manually - outside my DHCP range). X Serve operates as DHCP for everything else and I put the default gateway as 192.168.2.222. Internet works fine on all computers (including server). But I want the ADSL modem/router to be connected to ethernet port 2 on X-Serve (not straight into the switch). If I just unplug the ADSL router from the switch and plug it into port 2 of the X-Serve, the server can access the internet, but all clients can no longer. Anyone have *any* clue how to fix this?! It doesn't seem that complicated, I feel I have done everything right.
How do i connect my macbook pro to a macbook to transfer some files? I tried connecting via ethernet cable and restarted my macbook pro and it is still not visible or connecting to each other. I have my computer allowing connections through the settings
I was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
How many of you would like to see a HDMI Port? Why the miniDisplay port? Why not remove ethernet jack and miniDisplay port and replace it with a HDMI port. That way one HDMI cable feeds digital video AND audio. Am I the only one thinking of this?
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
I have a crossover cable and I need to connect my imac to my macbook so I can download some of my files on my macbook to my new imac. I know I have to go to Preferences > Networks > and change the ethernet settings but I'm not sure what to do.
Basically, I have a wireless router in my house that my Mac Pro connects to from a seperate room. I have an xbox 360 in my room with the Mac Pro. Without buying the $100 360 wireless adapter, could I configure it so I could run my 360 into my Mac Pro's ethernet port and piggy back off of my Mac's wireless connection to get on Xbox Live?
I used the MacRumors Buyer's Guide for several months to find the best time to buy a MacBook. I'd never had a Mac before and found it to be so valuable. I hope someone in the forum can be as helpful as the site has been.
Yesterday I bought a new MacBook Pro 13" and as a store option the RAM was doubled to 4GB. Everything has worked well so far, in both OS X and Windows XP through Boot Camp, except for either OS accessing the LAN cable on my home ADSL. Both my portable modem (EMobile network in Japan) and the wireless seem to work with no issue, and both OS will recognize the ethernet port. I'm concerned that perhaps the ethernet adapter was modified when the store installed the memory.
I can remove the ethernet cable from one computer (where it works without any settings changes on my Windows notebook) and plug the same cable into the MacBook and it will not be recognized. The Mac OS error is that no cable is inserted.
However, as it's my first Mac, I didn't know if perhaps some new settings are required to make things work smoothly. Is there any DNS settings etc. that must be set for it to connect? Also is there some kind of connection diagnostic that will specify the location of the error in the machine? I'd like to exhaust any option before shipping this back to the store to be repaired or replaced.
First I have an early 2008 Mac Pro with 2 Ethernet ports. Port 1 works but port 2 doesn't. Do I have to lug this BIG machine into an store or do they come to the house and fix it. I have the 3 year Apple Care. The closest store to me is 75 miles away.
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
I've got an issue with my TC setup, I cannot for the life of me get it to see the cable modem and setup the WAN access. If you will pardon me I will cut n paste the lengthy description I left on the apple support list as I feel it is pretty thorough. I think I know my way around networks and dhcp but this setup doesn't yield any logs so I can't troubleshoot! I'm on Virgin Media 20megs and I can't connect using my brand new TC. Modem: Ambit 256 Time capsule : 1 tB, firmware 7.5 Test router : Netgear WGR614V9 MBP alubook 15 inch late 2008
I tried connecting with the test router and the MBP alubook to the modem and both can pickup the ethernet connection and get a DHCP lease after some coaxing (cold-start the modem first, then cold-start the router/mbp). But I'm having no luck with the airport extreme base station. Hard reset / factory reset / soft reset, any startup order, nothing works. I even left the devices offline for an hour before doing another round of testing. I tried several cables (including a crossover cable) and all configurations work apart from the ones involving the time capsule. Both the modem AND the TC ethernet ports light-up with a green light... but somehow the TC doesn't negociate its DHCP or even basic ethernet connectivity. I see there's a firmware 7.4.2 on the support site for the TC but I'd rather not downgrade the unit.
Here are the console logs from the MBP when it connects to the modem (yes, my MBP is named awesome, because frankly it is): Originally Posted by System.log when connecting MBP to Modem 29/12/2009 08:54:04 Awesome kernel Ethernet nvenet: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug 796d,0000,0de1,0005,45e1,0000 Originally Posted by Modem status page Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant MAC Address : <<redacted to protect the innocents>> Serial Number : 0014A49B00A5 Boot Code Version : 1.1.2c Software Version : 2.111.1002 Hardware Version : 1.9
I have a MacBook Pro with OS X 10.5.6 I connect to the internet with an ethernet cable direct into the wall. When I open the network connection box, it says the ethernet is connected, but it will not load any web pages. Friday I was using it fine and then got off. Came back a bit later and could no longer connect to any pages. I have spoken to my internet provider and they say my settings are fine. I am online on my desktop that connects using the same ethernet cable. I am not having any trouble connecting on it. I went and bought a new ethernet cable, just in case it was the problem
plan to transfer from my Windows PC with the migration tool.I would like to know if it's possible to connect directly my PC to the Mac with an Ethernet cable. Is this considered as the same domestic network?
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)