I have noticed that about once a day at around 9pm or so my network goes out for 45 seconds to a minute and then comes back on.
I know this is weird and maybe its something we are doing but has anyone ever heard of this issue?
Is there a fix for it?
I want to put all my media (mainly music and movies) on an external hard drive.
It will be connected to MacMini media server using Plex. Then I wish to share to a MBP over the network (using Airport Extreme Base station).
Question is what is faster?:
1) a Firewire 800 hard drive connected directly to the MacMini then shared over the network?
2) or a Network hard drive connected directly to the Airport Extreme via CAT5e/CAT6, then shared over the network?
Given the size of some video files I have (High def movies 4GB+) I'd like the smoothest and fastest transfer rate.
Really confused welcome any suggestions!
I have two comps
1 mac pro
1 mac book pro
the wireless printing to my laser printing is amazing with the MBP but the MP is hooked up to the base station via ethernet. How do I get the MP to see the exact same printer that is hooked up via USB.
Upon getting my iPad and being unable to stream much without huge wait times, I've decided to take the plunge and get an Airport Extreme. Well, it arrived today, but alas it seems that I need a modem and Ethernet cord! Now, in my defense, I've been using a router that is both a modem and a router for years -- and it connected straight to the cable jack, so I didn't know that most routers needed a separate modem unit and Ethernet cord! Any way, it's too late to head out now so I'm going to have to wait till tomorrow to stream my precious netflix -- but I want to get it right this time; so...
I need an ethernet cord to connect the router and modem, right? The Modem/Router I've been using is called the SBG900 Wireless Surfboard Gateway. In my experience, the speeds have been dismal, but I should be able to use this as my modem -- right? Will it be slower than if I bought a separate modem? Does the modem even effect the speed of your internet or is that just the router?
We plug cable from the wall into our router, can I do this with the time capsule (extreme) / air port extreme base station?
View 6 Replies View RelatedBt homehub shoots the internet wirelessly to my next room, to the Airport extreme. This airport extreme sits next to a ps3 and an external network Hard drive (see model below). Basically, I want to be able to dump files from my imac into the other room on this Hardrive, whilst my Ps3 being able to access the Hardrive as usual. Unfrotunately, I can only get the ps3 or the airport extreme to connect to my hardrive through the USB slot. As the HD only has one USB slot, this means I can only use one at a time! Neither of the devices will see the Harddrive when it is plugged in by ethernet alone.. How can i make it so i can use the harddrive with my airport extreme AND my ps3 at the same time?
Hard drive model:
Freecom 30725 1TB NAS Drive Hi-Speed USB/Ethernet 10/100
brand new Imac with latest airport extreme
I finally convinced a friend to get a Mac and bragged about how easy everything works. He got a new iMac (loves it!) and signed up for Comcast High Speed Internet. Now there is a new MacBook in the house so I explained that all he would need is the AirPort Express in order to share the internet wirelessly for both Mac's. I went to set it up and I screwed everything up, after hours of work I not only couldn't get the Express working, I had to leave him without even ethernet internet. That's really all the info about his setup I have at the moment. So I came home to examine my own setup which is very similar: we both have the same Comcast modem (Arris TM502G) except I have an AEBS and he has a Express.
So I came home to examine my setup, it has been a while since I set mine up but its been flawless wirelessly (I never used the ethernet before). So, I plugged a ethernet cable in to the AEBS and connected my MBP. Works great. So I want to try to cut out the AEBS and just connect via ethernet from my MBP to the cable modem, that's where I start getting IP address problems. When an ethernet cable is connected to the AEBS my IP address is 10.0.1.12 and works fine. When I cut out the AEBS and try to run ethernet directly from my modem to my computer my IP Address changes to 169.254.181.6 and I get an error message saying that "Ethernet has a self-assigned IP address and may not be able to connect" and sure enough, I can't. Network Diagnostics tells me to configure via DHCP and restart the modem, still no luck. As I was searching tonight I came upon some discussion about Comcast limiting MAC addresses or something?
I had modem/router, which I got from the phone company here. It wasn't working that great, so I decided to order a Netgear modem and an Apple Airport Extreme. I got the Netgear modem to get me on the web, and the ethernet connection light stayed on, but when I connect it to my AE, that ethernet light goes off and the AE is constantly blinking. I reset the modem, and still nothing. I then reset the AE, and still the same thing. And when I try to connect my MB and iMac wirelessly to the AE, it tells me there are no apple devices present, and to retry.
View 13 Replies View RelatedJust got a new MacBook Pro, and I want to back it up wirelessly using Time Machine over my Airport Extreme Network. I've been doing this, in the past, with a smaller hard drive connected to the USB port on the AEBS, but need to upgrade to a bigger hard drive. Is there any speed benefit from getting a hard drive with ethernet capability, and attaching it right into the ethernet port on the AEBS, and if so can I back up with Time Machine wirelessly using this configuration? My AEBS is the first gen of the 'n' version that came out, but is gigabit ethernet, if that matters.
View 6 Replies View Relatedim planning on getting an airport extreme + hard drive for time machine backups & file storage. would it be best to just get a usb hard drive [URL] or a hard drive w/ an ethernet port [URL]?
View 3 Replies View RelatedCan anyone provide clear instructions on connecting a 2Tb Lacie hard drive to the Airport Extreme via one of the ethernet ports? The HD does not support a USB connection and I already have another HD connected to the Airport Extreme via the USB port. I am also working off of a PC laptop.
View 7 Replies View RelatedCan my AirPort Extreme work via a Cat5 ethernet port within my network? I ask because we've had no luck doing this where as our older Airport Express works just fine this way. Thoughts? We upgraded to the Extreme to extend the signal (and have 2 antennas) and trying to avoid hooking it up to the cable modem box which is even further away than where the Airport Express was located.
View 3 Replies View Relatedi connected it to my Airport Extreme and not the USB because i want to use the scanning and faxing features. so how can i configure it? when i connected it via USB it recognized it but when i connected it to ethernet it didn't...
View 1 Replies View RelatedJust wanted to share how well the Monoprice USB 2 gigabit ethernet adapter works on the new MacBook Air. It costs only $20. The speed I get is 30Mbyte/s over my wired home network. Here is the link: [URL]. For Mac OS X, you must use the drivers on the enclosed mini-CD as the default Apple ones do not work. For Bootcamp/Windows 7, download from [URL] the chip manufacturer. Works great and much faster than Apple's fast Ethernet adapter or WLAN.
View 5 Replies View Relatedvideo card would be the first place to start for better internet rendering--what's the most logical one i should install?
View 2 Replies View RelatedI have my iMac (2009 model) and MacBook Pro (2011) connected to a D-Link Gigabit switch using CAT5E cables.Switch is connected to my router using gigabit connection. Switch is showing gigabit connections for the link to the router and the link to the MacBook Pro (MBP). Link to the iMac only shows 100 mbit connection.
Cables are ok since behaviour is exactely the same when I change/swap iMac and MBP.
When I go the network/ethernet settings in iMac and change from "automatic" to "manual" and select gigabit, the iMac claims there is no network cable connected at all. When changing back to "automatic", connection is re-established but again with 100mbit connection only.
[code]...
Info:iMac (21.5-inch Late 2009), Mac OS X (10.6.8)
So with the lack of Gigabit ethernet options on the Macbook Air, I'm kinda hoping that some bright spark on here is going to shower me with suggestions on what 3rd party adaptors are available/been used. I've had a real good hunt around, and the only adaptor which I can find that people have got excited about (back in 2009!) was the Buffalo one... Annoyingly, this is pretty much nowhere to be found. The one thing stopping me from getting an MBA is the gig-e problem. As I use time-machine for backups, and transfer relatively large files around between offices<->datacentres<->home, it's rather important.
View 24 Replies View RelatedIs there such a thing for Macs? Can the network card be upgraded? I just browsed over a 100 on NewEgg and not a single one mentions OSX support. Does this work like alot of accessories where you just plug in (via PCI heh) and it just works or im stuck with 10/100? (all equipment in the house is N with Gigabit so if I could turn the PowerMac G5 into a Gigabit Machine, I could network files SOO much faster, other wise, its just a bottle neck)
View 11 Replies View RelatedDespite the prevalence of OS X in the Mac market place now, I've been unable to get OS X versions of some applications I use now and then, and a few games whose source-code no-one seems even willing to acknowledge ever existed, so I have an older blue and white G3 (300mhz) lying around. However, I no longer have any monitors I can really reliably use with it, so I was thinking I'd use VNC to remote-desktop into it instead. I got this all set-up, and it works okay-ish, but the main issue is speed. I'm connecting to it via a direct connection to my Mac Pro, which of course has gigabit ethernet, so I figured it might be possible to pick up a gigabit ethernet card somewhere, but with OS 9 being so old there is the issue of drivers. I'm hoping someone here might know where I can find a gigabit ethernet card for my G3? I may try firewire to see if that works at all, but I suspect that gigabit ethernet would be better overall if I can get that.
View 6 Replies View RelatedIn my house there is a wired and wireless connection.
On my macbook (2008 Al) the port on the side is gigabit internet.
In my house the cables are all ethernet (blue cables). These do not fit in the port on the side. Is there a way or an adapter to convert the ethernet to a gigabit connection?
Our still photographic studio has a range of MACs all connected via a gigabit D-Link switch to a series of Buffalo NAS raids. Wiring is CAT5e, all devices have gigabit ethernet cards and the link lights on the switch suggest that all devices are connected at that speed. We currently get file transfer rates of between 5 and 12 MB/s depending on network traffic. We would like to upgrade our NAS to a NAS/SAN, preferably using the existing wiring (and avoid the expense of Fibrenet). 50 or 60MB/s would be great if possible. Any suitable architecture and Hardware. Cable lengths are a maximum of 30 metres.
Info:
Mac Pro, Mac OS X (10.6)
I just got a MacPro at work and I will use this machine in conjunction with my Powerbook a lot. I realized that I could connect the Powerbook to the MacPro with an ethernet cable, given that the MacPro has two ethernet ports. I turned on internet sharing and I am able to browse from the Powerbook and connect to the MacPro as a server. I expected near Gigabit connection speeds when transfering files between machines
View 7 Replies View RelatedAnyone have good luck with a gig-e->USB adapter? I'm planning to get a MBA and cinema display, but I need the use of gigabit ethernet. Will it work well if I plug it into the USB hub on the display and will I be able to max out the USB connection?
View 8 Replies View RelatedI have a gigabit AEBS, that only gets 12 MB/sec MAX when I transfer files between my 2 macs via ethernet cable. I get 45 MB/sec MAX when I connect the 2 macs directly to each other via ethernet cable. What the hell is going on here? is this typical of the AEBS? I would expect these numbers from the 100Mbps AEBS, but not the gigabit version.
View 21 Replies View RelatedWill my thunderport work with the new gigabit ethernet adaoptor ?
Info:
MacBook Air, Mac OS X (10.7.4)
I've been looking around for an additional gigabit ethernet card for my single 1.8 G5 processor. I've read many of the postings but they relate to the 1.8 dual processor with pci-x. I only have pci slots (4 ram slot model - late 2004 revision) and am stumped.
The DGE-528T looked like it may work, then I read it hasnt been confirmed as working for the G5 sinle processor as of yet.
The next card that may work is the Intel PRO/1000MT.
Information:
Single processor G5
Mac OS X (10.3.9)
i share a house with my brother, lucky me He got a PC with Vista in his room. I got a lovely imac in my room. He gets the broadband cable direct into his room. It averages 40 mbps download , 1.67 upload. We use a wireless Netgear router one thats suppose to handle N wireless and i pick the wireless up on the airport extreme in my imac. Unfortunately i only get about 12 mbps download , 1.20 upload, even though i'm only in the next room. We both play WOW online. It works so much better on his PC cos of the internet speed. Could I use a gigabit ethernet connection between the PC and imac, to share the internet and still play WOW independently?
View 1 Replies View RelatedHas anyone had issues upgrading Thunderbolt to 1.2.1 to support the new gigabit Ethernet adapter? I have tried about 6 times to do the update but my ethernet adapter still isn't being detected.
Info:
MacBook Air, Mac OS X (10.7.4)
I'm a PC guy (unfortunately), and I wanted to get my wife (graphic designer) a Mac present for our 3 year wedding anniversary (maybe a bad choice). As a cheep axx i looked on eBay for best deals... and happen to stumble upon an old G4 (Gigabit Ethernet) Dual 500MHz tower. I understand that is a old model, but the budget constrains gave me a no better choice... $300-400. For the first Apple it is a start.To make it up i got her a 23" Cinema Display.My dilemma as you see is the old vs new technology. I have not yet received the merchandise, but as i read I'm up for a surprise.
1. Do i need a power adapter for the display?
2. Do i need a ADC converter (or something like it)?
3. What (cheep) Graphic card will be a plausible fit to avoid conversions?
4. Will that card work with my motherboard (if there is one inside lol)
So far browsing i got:
Recomendations
RADEON 9800 Series
Requirements: Power Mac G4 or G5 with NVIDIA graphics card or ATI Radeon 7500 or better graphics card Limitations: The Power Mac G4 Cube computer must have a Nvidia Geforce 2MX graphics card to be compatible with the Apple Cinema Display HD or Apple Cinema Display (20-inch). he Power Mac G4 - (Gigabit Ethernet) video card does not support the Apple Cinema Display HD or Apple Cinema Display (20-inch) unless the original video card is updated to one that meets the specification for the display.
Am seriously considering the new AEBS but seems some confusion over whether the ports offer gigabit Ethernet, can someone with the router confirm or deny this? Also how is the range compared with similar N routers?
View 1 Replies View Related
