OS X V10.7 Lion :: What Printer/fax/scanner Is Best From HP
Apr 24, 2012mainly to be used as a color scanner and to print coupons.
Info:
iMac, Mac OS X (10.7.3)
mainly to be used as a color scanner and to print coupons.
Info:
iMac, Mac OS X (10.7.3)
how to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
reccommend a printer/scanner all in one thats compatible with OSX Lion 10.7.3?
Info:
iMac
Dell 3115cn Multifunction Printer..Does anyone have any information how to use the Dell 3115cn scanner on Mac OSX macbook pro? Or rather has Dell updated the driver permitting us to use the scan function via usb?
Info:
MacBook Pro, Mac OS X (10.7.3)
I updated to V2.8 yesterday and now my printer does not work...
Info:
iMac
I've browsed the site for awhile now, but this is the first time I've had to post.
I recently tossed my old printer due to the scanner going bad, and picked up a new one. It's an Epson NX400. I've gone through the install disk, done what needs to be done, but I've got a problem.
Whenever I go to add it in the printer utility window, all I can do is highlight it. To clarify, it's showing up just fine under the 'Printer Name' section, and the 'Name' and 'Location' both fill in with the appropriate information when highlighted, but the 'Add' button doesn't become selectable.
It forces me to look through the 'Print Using' window, where the desired printer is nowhere to be found. This also happened when I tried hooking up an HP printer.
I've been scratching my head going through every support site I could find, but I'm giving up. Anyone familiar with a fix?
Esteemed List: I have an Epson Stylus CX6000 copier-printer-scanner. I have a newish Intel 2.13 GHz MacBook, OS 10.6.2 (Snow Leopard) with 2 GBs SDRAM and PhotoShop Elements 8. I migrated all my compatible software from a G4 12" PowerBook running OS 10.3.9, including the Epson software package - printer drivers, scanner, etc. - and the printer/copier works fine but neither Elements nor the laptop recognize the scanner software. The Epson site has a "complete" driver update for Snow Leopard that supposedly covers these issues. There is a warning that some parts of the drivers require OS 10.5, which this laptop never had. My question: is it safe to download and install these updated drivers? Do you have any suggestions?I do a fair amount of scanning work and need to access the Epson.
White 2.13 GHz Macbook, OS 10.6.2, 2 GBs SDRAM; Epson Stylus CX6000, Epson Scan 2.90 software; Epson Printer Utility and Epson Printer Utility 2.
Anyone care to offer a recommendation for a Mac-compatible all-in-one (printer/copier/scanner/ +/-fax)?
I am thinking about the Canon PIXMA MX860. My only concern about it is I currently have a (much) older Canon that uses Canon's MP Navigator 2.0 software and I find it somewhat clunky and buggy (and the included OCR is crappy).
Curious if anyone knows if the MX860 comes with better Mac software. Or if there are better alternatives to this all-in-one.
I need to find a good scanner / printer for an Intel MAC for my COO, laser if possible but not necessary. I'm more interested in something that has scanning software or can be used by Adobe Acrobat to scan PDF's etc. Something that won't need all kinds of third party to actually use the scanner.
View 6 Replies View RelatedI have an hp photosmart 4200 that is plugged into an airport base station.
One problem though... When I scan something I have to break out my laptop and plug it into the printer directly to get the scan. The printer, as far as I can tell won't send out the scan via the airport.
If I buy the new photosmart with wifi & Bluetooth and put it in the other room will it send my scans to my iMac in the other room?
Sounds like it should but I've yet to see that work.
I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replies View RelatedA few days ago I finally upgraded my iMac G4 (Flatpanel) from 10.4.9 to 10.4.11. I had not printed or scanned anything since then, but today I needed to do both, and they don't work. I think it has something to do with the upgrade because they were working just fine before that.
The printer is an Epson Stylus 777i
The Scanner is an Epson Perfection 640U
What could have changed, and how can I get my Mac and peripherals to work together again?
i am in very awkward situation.
i have old dell desktop (without monitor), lexmark all in one printer (which does not support Mac OS), Samsung laser printer (which also does not support Mac OS), Windows Laptop and a NEW iMac with wireless broadband router.
Question is because the old printers are not compatible with new imac, I need some solution to print and scan.
My options are:
- Connect old printers to desktop PC tower and connect PC tower to router via ethernet and use printers via sharing.
- Connect printers to windows laptop as needed but this restricts the use.
- Get rid of the two printers and desktop tower (which is not needed for anything else) and buy a new wireless all in one printer which works over both mac and windows. I can get �30 for the old desktop at local trader but nothing for printers as they are deemed worthless.
So I purchased a brother MFC 290C so I could both print and fax.
I was able to hook it up to my airport extreme base station (the n version) and set up the printing function from multiple computers. So I am happy with that.
However I am unable to set up the network scanning function because I need 1 of 2 pieces of info:
Either the IP address for the printer OR the mDNS service name..
Now the printer is hooked in to the base station using the USB port. What is the easiest way to find its IP address? I am not allowed to enter anything for mDNS, I have to browse, and I can not see any choices when I browse for it.
I need fast, double sided printing over wifi (b/g) with good support in 10.6.
Doesn't have to be a great photo printer, but I do need colour. Scanner needs to be good enough for docs.
I'd prefer it to work well with built-in software and not come encumbered with ancient clunky software that needs Rosetta.
I've currently got separate Cannon scanner/HP printer, but neither work well with 10.6 (eg no duplex printing on the HP).
Would appreciate up-to-date advice as most info out there on the interweb is vague or for 10.5.
Apple published a report url...that states system 10.6.8 supports the HP LaserJet 4MV. If this is accurate information, I would like to know where the drivers are located. I have spent more than three hours with your technical support and no one has a clue how to make this combination work.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.6.8)
I have MACBOOK G4 OSX 10.4.11. Which driver do I need for the Epson Stylus PHOTO RX620 (and where do I get it?
Info:
MacBook
I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer.
Info:
Mac OS X (10.7.3)
I upgraded to Snow Leopard and now my printer scanner won't work. It says it cannot recognize my computer. I have installed a few updates available and restarted and it still won't work.
Info:
iMac, Mac OS X (10.6.8)
I should have posted in this forum first as its printer related. But does anyone know how to get the above printer scanner working with snow leopard?
View 3 Replies View RelatedEver since I moved to Lion my Hp Photosmart All-In-One Printer Scanner Copier no longer scans or copies.
Info:
MacBook Pro, Mac OS X (10.7.4)
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I have an iMac 27" (intel 3.4 GHz, Intel core i7, and 16 GB memroy) purchased a few months ago. It is running the latest version of Lion 10.7.4 I run this computer on our network along with a iMac 24" 3.5years old and a Macbook Pro 2.5year old.
This computer seems to have a beef with the Hewlett-Packard printer (HP colour laser jet CM1312nfi MFP) which I have had for about 3 years. I can not get the new computer to work with the printer properly. It allows printing but it pauses all the time when you resume the print it starts printing from the begining of the document againIt will pause any prints sent to it across the network after the first 1 or 2 pages are printedIt won't allow scanning at allWhen you launch the scanner it takes forever to connect (3 - 4 mins)If you try to scan using any of the scan options (if it loads the devise) it then states it can not connect to the device, or all the scan buttons apear but greyed out.This is odd as it will still allow printing??
Also, all the other PC's have the same version of Lion 10.7.4 and have the latest HP Driver installed (these were released on the 14 Dec 2011). Other useful infoThe scanner is hard wired to the 27" machineYou can only use the printer if one scanner is hard wired as it does not have wirless capacity.I have uninstalled and installed the software more times than i can count trying all different trouble shooting etcI can only conclued that there is somthing the 27" machine is doing to prevent the scnanner registering properlyNone of the other computers can use the scanner correctly either. As you can only scan a page at a time using the "Scan" button. If I wish to scan multiple pages on with either of the other computers I need to use the "scan to folder" button.
Hp scanner 4000 series not working since downloading Lion. I downloaded the driver, but it does not work. Received instruction to uninstall scanner, but cannnot do that since it is "grayed" out. HP support did not help.
Info:
Mac OS X (10.7.3), Hp scanner won't work
It is, when I go to the instructions to uninstall HP scanner I get this: You can't open the application HP Uninstaller because PowerPC applications are no longer supported.
Info:
iMac, Mac OS X (10.7.4)
I have installed the HP C309a Photosmark software on my MACBook. The printer works fine, but I can not get the Scanner to function.
Info:
MacBook Pro, Mac OS X (10.7.3)
I need Microtek Artix F1 scanner software for Lion. Any suggestions?
Info:
iMac (27-inch Late 2009), Mac OS X (10.7)
Lion does not recognized HP Scanner. Lion initially recognized the scanner and it worked perfectly for months. All of a sudden communications with the scanner stopped. I have checked the USB cable and it is working properly. I am using Bootcamp and when I boot in Windows the scanner and computer (iMac) work perfectly. I have downloaded, removed and reinstalled the HP software and update for Lion. When I go into System Preferences > Print/Scan, It sees all other printers and scanners including another HP printer scanner.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
Can I use both anti-malware apps in conjunction without problems?
Info:
MacBook Pro, Mac OS X (10.7.4), 13" Mid-2010