I'm trying to get my Canon SmartBase MP390 to work with my Mac, and I need to be pointed in the right direction, assuming there is a right direction. Aren't there any open-source Linux drivers or something that I can use?
View 1 Replies
I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
View 4 Replies View RelatedI have a Canon MP460 connected to my iMAC however I am unable to scan. I can print perfectly and would like the scan capability to work. How do I get the scan to work?
Info:
iMac
After upgrading to Maverick on my 2.93 GHz Intel core 2 duo processor with 4 GB memory and a 10.9.4 version for my OS X my canon MG5220 all in one printer scanner shows as MP Navigator EX quits unexpectedly.
Info:
iMac, OS X Mavericks (10.9)
I have downloaded Canon driver 10.51.2.0. I tried Navigator Ex 3.1 . All Apple updates have been run. I tried removing printer and bonjour scanner and reinstalling. All ng. I cannot launch from " Solutions Menu ". Printer does print. If I try and scan from image capture it scans very very slow and is not accurate. I tried connecting with a usb cable and not using the wifi. Still ng.
Info:
iMac, Mac OS X (10.6.8), Canon Mp560 Driver 10.51.2.0
how to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info:
iMac (24-inch Early 2008), Mac OS X (10.7.4)
My iMac and Canon scanner "aren't friendly" with each other. Only the very first time I succeeded to obtain my scanned doc saved as pdf. Later on the scanner simply started quitting after having scanned the doc.
View 2 Replies View RelatedI have updated to lion and now I can't use my scanner canon N670U and phone Nokia C2-01. Is the solution now to waste lion and reset to snow leopard??
Info:
MacBook, Mac OS X (10.7.3)
I have just upgraded to OS mavericks. My Canon MP550 printer, scanner worked fine on the old Mac. However, with the new Mac the printer works but the scanner doesn't. What should I do to make it work?
Info:
iMac, OS X Mavericks (10.9.3)
this canon 4400f is a fine scanner but does not have an on off button.it powers up with computer start up, but eventually powers down.how do i set preferences, etc. so it only powers up when directed?i have searched manual but found nothing.
View 1 Replies View RelatedI just bought me a brand new Canon DR-2020U, but to my dismay, I noticed that it doesn't have OS X drivers, and OS X doesn't even flinch when I connect the scanner to it.
I googled for drivers, but the official site does not say anything about those drivers. I have, of course, the Windows drivers and I can operate it through Parallels, but I feel a little stupid for paying $700 for a scanner which does not have necessary drivers to operato on my OS X.
I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer.
Info:
Mac OS X (10.7.3)
I have a Canon MP600 scanner/copier/printer. It's connected to my MacBook which I purchased in Sept 2007. I have 10.5.2 on my computer. Computer's HD failed after 4 months, then flex cable (BUS cable?) had to be replaced about a week ago. Scanner worked fine before 10.5.2 and the hard driver failing.
Scanner scans the document, but a screen pops up on the computer that says "Unable to save file. The system cannot find the path specified."
I am unable to install a software driver for a Canon film scanner FS4000US. I have downloaded it from Canon then open the package click the install and it asks for a location namely the Applications folder. Then it says it has been installed re -start etc, but still no driver.I am using Mac OS 10.6. Any suggestions greatly received. I have repaired/disk and permissions and it still does not work.
Info:
iMac, Mac OS X (10.6.7)
This is not a Canon problem as other computers (PCs) detect the scanner and work fine. This was originally the easiest multi-function printer/scanner setup I ever did.The scanning is easy and worked fine for a couple of months, then several days ago it gave "scanner not available" message,tried deleting the scanner and then adding, now it will not detect the scanner ONLY the printer
Info:
iMac, Mac OS X (10.7.3)
I read here that scan software for the HP OfficeJet 4215 under OS 10.5 was being tested and almost ready for release. That was in October, 2009. I can't find it anywhere. The HP download site says that the scanner function of the 4215 is not supported under 10.5. Does anyone have suggeestions on how I can get the scanner to work? Everything I try says, "No Image Capture Device found."
Info:
iMac (20-inch Early 2008), Mac OS X (10.5.8)
I have installed the HP C309a Photosmark software on my MACBook. The printer works fine, but I can not get the Scanner to function.
Info:
MacBook Pro, Mac OS X (10.7.3)
My HP Scanjet 3970 has never been to happy with my Mac running snow leopard. But it has always worked in the end. But now maybe because its OSX 10.6.4 it just wont recognize the scanner is there.
Anyone know of a way around this? I can't even remember what I did last time, I know it tok days but I got there in the end! I don't use the scanner much, and this one is perfectly good, so I really don't want to have to get another one.
hp 3055 scanner wont work with imac
Info:
iMac
My mp 830 works just fine - but the scanner doesn't work - the machine looks fine - probably a software or driver problem?
Info:
MacBook Pro, Mac OS X (10.7.3)
A few days ago I finally upgraded my iMac G4 (Flatpanel) from 10.4.9 to 10.4.11. I had not printed or scanned anything since then, but today I needed to do both, and they don't work. I think it has something to do with the upgrade because they were working just fine before that.
The printer is an Epson Stylus 777i
The Scanner is an Epson Perfection 640U
What could have changed, and how can I get my Mac and peripherals to work together again?
I have a Epson Perfection 636u scanner from 1999 and am thinking of getting a new iMac. On the Epson support page, it lists the newest driver from 1999 and says that it will work on Macintosh system 7.5 to 8.6. (here is a link http://www.epson.com/cgi-bin/Store/s...s&platform=All). Any chance of this working on Tiger? I don't see myself buying a new scanner because I use it just a few times per year.
View 4 Replies View RelatedI updated to Snow Leopard. I have an HP 6310 All-In-One. The scanner portion worked fine prior to the update, now an "Unknown Error" constantly occurs preventing me from scanning documents. Image Capture doesn't even recognize there is a scanner available. I have downloaded the most recent driver from HP, (2007), but it still does not work. Will I have to wait for HP to build a new driver specifically for Leopard?
View 10 Replies View RelatedI'm using the printer that came with my Mac when I bought it, last year. (Photosmart C4385 All-In-One)
After working fine, suddenly, the scanner doesn't want to work. Another computer in the house, a HP Desktop seems to work fine, but as far as my far superior Mac, I get a scan error message. this happens in both wireless and connected. The printer is working fine in both wireless and connected methods.
Worse, HP is no longer allowing for on-line support via chat for Mac users! Then when trying to call them, they say that their call centers are not available. It almost seems as if HP doesn't want to hassle with Mac related problems.
Are any of you having similar issues?
My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?
View 6 Replies View RelatedI went to HPs site to find they will not be supporting this model. I use it almost everyday to scan my jewelry creations for my website and Etsy store. I love Lion so far and needed to upgrade before my .mac services go away, I was told. The main requirement is good depth of field for 3D scanning.
View 2 Replies View RelatedA PC on our network is doing printer sharing with a Canon MP530. I can get all the Windows PCs to print off it but I can't get our Mac to do so. Our one Mac user has to unfortunately email everything to someone else to print it for her. Would like to solve that problem.
I already tried downloading and installing drivers for the printer but still don't allow it over the network.
I've downloaded a driver from Canon, and at someone else's suggetsion, a Canon toolbox, but: My Canon Scanner LIDE 600f won't work on my Mac Lion.
View 2 Replies View RelatedI have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Info:
MacBook Pro, Mac OS X (10.7.3)
So I got my copy of Snow Leopard today and installed it fine on my 1st-Gen Mac Pro, then rebooted into Vista x64 to load the Bootcamp 3.0 drivers. I immediately get an Installation Error that says "BootCamp x64 is unsupported on this computer model." So I go to the Apple support web site, which has a document dated 6/9/09 referring to MacOS 10.5 (not Snow Leopard 10.6) and that only Mac Pros from 2008 or later are supported with x64 Vista. That is ridiculous since I've been running x64 Vista on my 2006 Mac Pro ever since BootCamp 2.0 came out. I tried running running the "BootCamp64" installer package, but immediately get an error that says "This installation requires elevated privileges. Launch the the installer through setup.exe." Any ideas on getting Bootcamp 3.0 x64 running on my 1st-Gen Mac Pro?
View 16 Replies View Related
