Mac Pro :: RAID Configuration Supports Both USB And Esata?
Jan 9, 2010
I made about adding esata to my Mac Pro 2.66 Quad, I added a card and now have to esata ports.I've been thinking about buying an Icy Dock enclosure that will hold 2 HD's and supports both USB and esata. The way I see it, I should want to run the faster esata.It has all kinds of settings including some for RAID configurations.It appears that the RAID will work with USB but as to the esata, which is what I want, there is the following language
View 4 Replies
ADVERTISEMENT
Mar 1, 2010
I'm new to Mac and loving it so far. I've been using Windows Vista Ultimate 64 bit for graphic and web design the past several years until I just couldn't take it any longer. Trouble is I had all my client files on an external Seagate hard drive with only an eSATA connection on the device (which I connected to my PC with the included eSATA PCI card.
But apparently my new Mac Pro will only accept PCI-express cards, and I'm having a hard time finding a PCI-express eSATA card that supports a 64 bit OS (I'm using Snow Leopard).
View 6 Replies
View Related
Apr 7, 2009
I have a MBP (see signature) and two Freecom 500GB USB external Hard Discs. Is it possible to somehow set up these two HDDs in a RAID 1 configuration under OS X. The reason for this is that right now I have a large collections of films on the one of the HDD and would hate to loose them all if the disc failed.
View 1 Replies
View Related
Sep 28, 2009
Having never set up a RAID config I was hoping I could get a little confirmation on setting up. Firstly, all data will be backed up using a NAS (maybe a time capsule), so at the moment I am just looking to mirror the primary drive of a Power Mac G5 incase of hardware faults.
The G5 is acting as a server and I therefore want to arrive at a situation that if a drive fails, the machine will still boot perfectly from one of the redundant disks (and of course notify the user to the failure), i.e. a bootable RAID 1 configurationAs I understand it, I can only achieve this using a dedicated RAID controller (i.e. this can't be done via a software raid)? Is this the case?
View 3 Replies
View Related
Sep 29, 2008
Anyone know if it's possible to attach two USB hard drives to a Time Capsule via a USB hub, and configure them in a RAID1 configuration and use them as my Time Machine backup disk? I would then use the TCs internal drive as network storage.
View 7 Replies
View Related
Feb 27, 2010
I already have a 2x 1tb RAID 0 drive (totaling 2tb). I butchered my old XP machine and ripped out its 1tb drive.My question is, can I add a that old XP 1tb to the exisiting RAID 0 combination?Before you say, I triple backup all my files which are mainly photos so I am aware of the dangers of RAID 0.
View 6 Replies
View Related
Oct 28, 2009
The MBP has one expresscard slot. So if you use an eSata adapter (even if it has dual eSATA ports) it would only have one eSATA channel And that would be limited further by the express card slot and more still by the type of card (make, model, etc..). My question is: with Barefeats claiming even the best eSATA card for a MBP being 200MB/s (even if you claim less) using a dual eSATA RAID connection for a stripped array would be limited to 100MB/s per port. Is this correct? Because I'm trying to understand this to see if it's worth building a RAID setup for my MBP when I'm home.
I've asked this numorous times and get helpful advice but not addressng this specific and fundamental fact. I am not interested in FW800 because I want the fastest I can get but want it to make sense. I would also reask my other questions about my situation but this question comes first.
View 8 Replies
View Related
Sep 25, 2008
Is there any benefit to ordering the MAC Pro Raid card for setting up 2 x 500gig SATA drives in a Raid Zero configuration? Or..Is this accomplished just as well via software in leopard??
Apologies if this is a stupid question - but just wondering if I can save some $ by not having to order the RAID card without giving up anything.
I will use a 3rd 1TB drive for Time machine for back up.
View 11 Replies
View Related
Jul 1, 2009
So right now my current configuration features a 1TB Maxtor Central Axis which houses my iTunes library for streaming to my various computers, devices, PS3, and television. In addition I have a 1TB LaCie hard drive that I use to general backups. I have been considering setting up some sort of RAID configuration to ensure data redundancy while also being able to use the same set up work as a streaming NAS server to my other components. I know Drobo makes a product but it's rather expensive given it's specs.
View 2 Replies
View Related
Mar 8, 2010
I've been looking at the Mac Mini server for my next computer purchase, but I've had a few things confuse about the set up. I've seen at least one thread where someone got their Mini server to use RAID 1 settings on the dual internal drive set up.
What I want to know is will a RAID 1 configuration play nice with Boot Camp?
Is it even possible to use boot camp on a RAID 1 configuration?and if it is possible, would the RAID 1 duplicate the Bootcamp Partition too?
These are three important questions because I like the idea of the RAID 1 security and because I'll be pairing it with a Blu-ray drive I'd most likely have to install Windows via Boot Camp to watch them.
View 2 Replies
View Related
May 16, 2007
I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.
View 2 Replies
View Related
Dec 2, 2009
I just bought a Guardian Maximus RAID1 kit and I have two 1TB drives in it. I'm using it over Airport Extreme as an airdisk (mac osx 10.6.2)
My question is simply: am I running a risk by partitioning it into two partitions? Should I ever have to rebuild the failed disk (which I understand is really simple with the Guardian Maximus) - will it have trouble doing two partitions? I'm using one 500gb partition for time machine and one 500gb partition as redundant itunes/media.
View 3 Replies
View Related
Jan 28, 2009
I have a Lacie ext hard drive with 2 x 250gb HD that were one RAIDed into a single 500gb HD. I ran this update Lacie firmware update: http://www.lacie.com/support/drivers...r.htm?id=10053 And now my HD will only show up as two separate HDs of 250gb instead of a single RAID HD of 500gb.
View 6 Replies
View Related
May 1, 2008
I have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
View 3 Replies
View Related
May 20, 2009
I have a new Mac Pro Quad 2.93 with the Mac RAID card installed with four 1TB drives setup in a RAID 5 array. When creating the volumes in the RAID utility, you can not edit them, resize, etc. If one large volume is created in the RAID utility, you can then partition that one volume using the Apple Disk Utility, which then allows you to resize if needed.
View 1 Replies
View Related
Sep 13, 2009
I'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?
View 1 Replies
View Related
Jan 28, 2008
ive put 4 of the hitachi 1tbs in my new mac pro.. and i really want to do Raid on them eventually.. and buy the pricey apple raid card.. i'll do it.. but speed wise:
How fast is a Sata connection straight from HD>Motherboard... ~75mb/s?
Is the Raid 5 config with all those drives much faster... around ~110mb/s?
Do you know if there is anyway to get a 5th drive into the raid 5 array? using the ODD space.. or some externals too... i need as much as space as possible...
And boot camp wont work with raid card anymore? I was thinking to have the startup disc be a raptor to increase speed on the apps, how would it integrate with the raid card, etc
View 9 Replies
View Related
Nov 16, 2009
I have a RAID 0 set up with two 1.5TB HDs. I am doing some reorganizing and want to take all the data on the RAID 0 and move it to one of the hard drives in the RAID 0 and create to single drives. Is there any way of moving all the data from a RAID 0 onto one of the HDs?
View 4 Replies
View Related
Apr 20, 2010
I am planning on getting a 2010 MP when they come and have a question about it. I am 90% sure that with my budget, I will not be able to after a RAID card. I am wondering if software RAID would be alright or if it's so bad it's not worth doing. Also, there is small chance that I could buy a RAID card later on, how would I install it? I will be using it for 3D animation with Maya and some zbrush modeling. Also I will be doing some Photoshop and illustrator and maybe some gaming on win 7 boot camp. Feel free to list any other pros and cons about either a software RAID or hardware RAID, I wana make sure I have all the details before making a final decision on it.
View 24 Replies
View Related
May 15, 2009
I have never setup RAID before and this question may be totally stupid for that matter.
Can I setup RAID 1 (or call it mirroring) without the RAID card? I have two 1TB internal drives in my Mac Pro and I want to mirror them. I don't want to spend another 700 bucks just to setup a mirror.
Disk Utility shows some RAID options, but I am not sure how to use them, or if they will work at all without the RAID card.
View 9 Replies
View Related
Feb 14, 2010
On my 2009 Mac Pro, OS X's disk utility seems to allow the provision of making a mirror RAID or a stripe RAID.
Is it possible to shove in 2 drives, make a RAID 0 for two of them, and then add in 2 more drives to make a RAID 1 out of that RAID 0? (a RAID 0+1?)
View 10 Replies
View Related
Aug 27, 2009
Pretty sure it did just trying to clarify. 1.6ghz MBA rev. A supports 64 bit right?
View 4 Replies
View Related
Mar 1, 2012
As I wait for my Apple Extreme Base Station, I was wondering if it would make sense to create two different SSID networks. One Mixed b/g for 2.4GHz devices and another one solely for 5GHz. I know my ATV2 supports 802.11n in 5GHz. As I go down my list of devices in my house, I can't tell if my MacBook Pros support the 5GHz. Both MacBook Pros are Mid 2010 models.
The reason for creating two different networks is that the AEBS downgrades your network based on the lowest device (i.e. b/g would be forced on a n device if such device connects to your network).
View 5 Replies
View Related
May 3, 2012
I recently purchased mba 2011 (256gb with i5 ulti), and incoming release of Adobe CS6, I would like to ask if my machine is capable of running CS6? In company I will be given a mac mini 2011 and at home I have a macbook air 2011.
The Photoshop CS6 mentions they need: Mac OSMulticore Intel processor with 64-bit support-Mac OS X v10.6.8 or v10.71GB of RAM2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)1024x768 (1280x800 recommended) resolution display with 16-bit color and 512MB of VRAMOpenGL 2.0–capable system?
Info:
MacBook Air, Mac OS X (10.7.3)
View 3 Replies
View Related
Apr 4, 2008
Does anyone know how to add cover art? It just comes up completely black and would be great if it could show the DVD cover.
View 1 Replies
View Related
Oct 24, 2010
I go to my Hard Drive icon> Library>Application Support. it is different than going to Home>Library>Application Support.
View 1 Replies
View Related
Oct 28, 2008
Check out this site and read step 12.
[URL]
It stating that the new Macbook aluminum Montevina chipset appears to support up to 8gb.
Is this true??
View 23 Replies
View Related
Feb 7, 2009
I need to get a camcorder which supports firewire and has a HDD.
View 2 Replies
View Related
Jun 7, 2009
what is the best software that supports Logitech G9 mouse? it has 2 side buttons and the scroll wheel is also another button.
View 6 Replies
View Related
Apr 28, 2010
I have an i7 chip and was wondering if the 13" MBP would support it if I popped it in there. Two other questions:
1) Is this release Apple's final update of the MBPs before September (when I go back to school)?
2) Is there a way to get a double or triple external monitor set up with the new MBPs without dropping $200 on a DualHead2Go?
View 1 Replies
View Related
