Anyone know if it's possible to attach two USB hard drives to a Time Capsule via a USB hub, and configure them in a RAID1 configuration and use them as my Time Machine backup disk? I would then use the TCs internal drive as network storage.
View 7 RepliesI have a macpro with 4 x 1tb drives
Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?
Lastly, are the highpoint 3500 series a decent card? and fully compatible?
I have a MBP (see signature) and two Freecom 500GB USB external Hard Discs. Is it possible to somehow set up these two HDDs in a RAID 1 configuration under OS X. The reason for this is that right now I have a large collections of films on the one of the HDD and would hate to loose them all if the disc failed.
View 1 Replies View RelatedHaving never set up a RAID config I was hoping I could get a little confirmation on setting up. Firstly, all data will be backed up using a NAS (maybe a time capsule), so at the moment I am just looking to mirror the primary drive of a Power Mac G5 incase of hardware faults.
The G5 is acting as a server and I therefore want to arrive at a situation that if a drive fails, the machine will still boot perfectly from one of the redundant disks (and of course notify the user to the failure), i.e. a bootable RAID 1 configurationAs I understand it, I can only achieve this using a dedicated RAID controller (i.e. this can't be done via a software raid)? Is this the case?
I made about adding esata to my Mac Pro 2.66 Quad, I added a card and now have to esata ports.I've been thinking about buying an Icy Dock enclosure that will hold 2 HD's and supports both USB and esata. The way I see it, I should want to run the faster esata.It has all kinds of settings including some for RAID configurations.It appears that the RAID will work with USB but as to the esata, which is what I want, there is the following language
View 4 Replies View RelatedI already have a 2x 1tb RAID 0 drive (totaling 2tb). I butchered my old XP machine and ripped out its 1tb drive.My question is, can I add a that old XP 1tb to the exisiting RAID 0 combination?Before you say, I triple backup all my files which are mainly photos so I am aware of the dangers of RAID 0.
View 6 Replies View RelatedIs there any benefit to ordering the MAC Pro Raid card for setting up 2 x 500gig SATA drives in a Raid Zero configuration? Or..Is this accomplished just as well via software in leopard??
Apologies if this is a stupid question - but just wondering if I can save some $ by not having to order the RAID card without giving up anything.
I will use a 3rd 1TB drive for Time machine for back up.
So right now my current configuration features a 1TB Maxtor Central Axis which houses my iTunes library for streaming to my various computers, devices, PS3, and television. In addition I have a 1TB LaCie hard drive that I use to general backups. I have been considering setting up some sort of RAID configuration to ensure data redundancy while also being able to use the same set up work as a streaming NAS server to my other components. I know Drobo makes a product but it's rather expensive given it's specs.
View 2 Replies View RelatedI've been looking at the Mac Mini server for my next computer purchase, but I've had a few things confuse about the set up. I've seen at least one thread where someone got their Mini server to use RAID 1 settings on the dual internal drive set up.
What I want to know is will a RAID 1 configuration play nice with Boot Camp?
Is it even possible to use boot camp on a RAID 1 configuration?and if it is possible, would the RAID 1 duplicate the Bootcamp Partition too?
These are three important questions because I like the idea of the RAID 1 security and because I'll be pairing it with a Blu-ray drive I'd most likely have to install Windows via Boot Camp to watch them.
I currently have a 2010 Mac Mini connected to my TV with 3 external drives with my movies/tv shows/itunes attached. I have an old PPC g5 iMac in the other room doing nothing. Can I use that iMac as a server with the external drives attached and have Plex read them all from my network on the Mini?
View 2 Replies View RelatedI have a linksys wrt610n wireless router that isn't set up yet. You can attach USB drives to the router to use as a nas. I can't find if time machine will use it or let me use a drive attached to the router for my backups.
View 3 Replies View Relatedis there a way to speed up my mac with three external hard drives attached,at the moment my mac is taking ages to boot up, they are all 2tb drives
View 4 Replies View RelatedThe time has come to move to a RAID setup in my Mac Pro. Ideally I'd like to run 4 1.5TB SATA drives in a RAID 5 or 10. It seems there are a LOT of threads on this topic all filled with different information, so I have a few questions...
Which RAID cards are bootable?
Do any work like the Apple card and interface with the drives through the logic board?
If not, how do you connect the internal drives to the RAID card in their stock bay locations?
I just got a brand new MAC PRO desktop. It came with a 600GB HDD. I purchased a second identical internal 600GB HDD. I wanted to do setup a RAID 1 using these 2 drives. Currently the main drive has the OS and all my other apps installed. I installed the 2nd drive and was fooling with disk utility. I'm not sure how to set this up however. I tried numerous guides online but I just cant figure it out.
MAC PRO (takes up to 4 internal drives) - currently installed 2 identical drives
Leopard
Using Disk utility
The RAID tab says "online" and the status is green (indicating the RAID is working). However on my desktop i see the 2nd hardddrive mounted with no contents in it. I just want to able to use the 2nd drive as a mirror so this way if one fails I'm still up and running.
I just got the apple mac pro raid card today, but after I connect it and all 4 SAS drives, the MAC OSX Installtion program can not detect the SAS at all, I open the RAID Utility but no dirve there, the battery is in charging status.
View 2 Replies View RelatedI currently have a 2TB WD mirror edition that is setup in RAID 1 so it will mirror all my data. Now I also have a bunch of other drives laying around which I also feel the need to back up and currently I am doing this by doing a whole bunch of dragging and dropping and copying and pasting etc etc etc and this is making me very tired. I know that a setup is possible in disk utility but I am not at all sure about how to configure it so I wont lose any of my data.
Some details about my setup:
Mac OS X 10.5.6
PowerPc G5
Harddrives: two 1TB WD MyBooks, and two 500gig WD Mybooks --> these pairs need to mirror each other and make my life less of a hassle.
I'm about to configure my 2006 MP with one of Apple's RAID cards using RAID5. I currently have 4x 750GB drives that I can use, but I can see needing more space in the not too distant future. When I do need more space, can I simply drop in a 2TB drive, let the RAID system reconfigure itself, and repeat this until I have all 4 drives in place? Is there a better or different way to do this? I know that if one of the drives is larger than the others, then only a drive space equivalent to the smaller drives will be used in RAID5. After addition of the fourth drive (per the above scheme), will the array then use the full 2TB of each drive?
View 7 Replies View RelatedSo I have a Mac Pro with Bay 1 acting as my regular start up drive. I also have three other Western Digital 500GB hard drives that I have been using as a RAID backup system. However, when I place all three of the RAID hard drives into Bays 2, 3, and 4, the computer will not boot. It never reaches the Apple logo, and continually tries to restart. So I figured one of the hard drives was corrupt.
However, I have tested all three hard drives in Bay 2 and the computer will boot just fine. I have also tested each bay individually (i.e. the same RAID hard drive in each of the Bays seperately) and the computer still boots fine. I can even power up with any two hard drives in Bays 2 and 3. The only time I can't power up is when all three of the hard drives are occupying all three of the extra bays.
Also, none of the RAID hard drives show up in Disk Utility or on the desktop. Shouldn't I be able to view them as normal internal or external hard drives being plugged into my Mac? They do show up in RAID Utility. Is this normal with RAID hard drives, or should they always show up in Disk Utility?
I created a new RAID backup with two of the drives together (Bays 2 and 3) and it recognizes it in System profiler. However, I want to be able to use all three drives for the RAID.
Info:
Mac Pro, Mac OS X (10.6.8)
I have a 8-core MP 2.8Ghz with 10gb ram and Ati 2600HD. I'll someday replace the ATI with a quadro (all my application is 3d/CAD/Design) I'm installing 4 of the WD640 drives, they arrive on Friday.
I would love to order the CalDigit RAID card but after searching I finally figured out it's not available until next month.
That said, I need my system to start working ASAP and I don't want to wait if I don't have to.
I'm a designer, I need fast scratch so some striping needs to be involved. I also need data protection. At this capacity Time Machine isn't going to be of any use and I'd prefer redundancy anyway.
The 4 WD640s are replacing: 1 750gb 7200.11, 2 WD SE16 500GBs, and 1 320GB (Apple Stock Drive).
I would like to sell some of those drives to defray the cost of this endeavor but I'm open to keeping 1 or possibly 2 as external drives or stuffing one into the optical bay with a converter.
I want speed and reliability, of course! But really the largest motivator here is the combined drive aspect. Having so many volumes is driving me nuts.
My intention had been RAID 5 or 6 but I now know that Apple Software RAID can't do this. So now it seems with software RAID 0+1 would be the only option.
Realistically, does the cpu performance degradation outweight the speed gained from striping the drives? It's so difficult to determine bottlenecks.
Any thoughts on my best bet without/before the RAID card arrives. Can I migrate the array after installing the card without data loss?
If I just JBOD the drives can the concatenated set be broken up ever? I was thinking I could JBOD until the card came.
I have a bunch of Mac Computers here and I want to make a file server for them with about 5 drives in an RAID array to be a little bit secure. I am fairly certain how to go about and build myself a basic file server for a bunch of PCs networked together, but I am not sure about how to do it for a network of Macs.
View 1 Replies View RelatedWhat is, in theory, the fastest raid type, when I use two hard drives.
View 3 Replies View RelatedCan I install a Raid Controller and connect say two drives to it, specially for windows? Will it be bootable? Or perhaps even connect the iPass of the four internal bays to an Adaptec 5405 and get a separate cable for my Mac Drive. Will both be bootable? What if I just want to boot Windows for now? I sometimes need to convert my early 2008 Mac Pro into a rather beefy Windows workstation and the lack of HW Raid is rather irritating.
View 1 Replies View RelatedI have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?
View 10 Replies View RelatedI have a Mac Pro with all hard drive slots filled. The first two disks (includes startup disk) are independent, and 3 and 4 are set up in a RAID 1 mirror. I have to take my computer into the Apple store for a repair and I'd like to just take out all the disks except for my startup disk... however I'm not sure how to go about doing so for the RAID. If I take the drives out, and boot up the computer with them no longer inside, will the computer "freak out" and/or will the computer no longer recognize the RAID if I put them back in again later?
If the latter is the case, will the data be lost or would I just have to set up the RAID again... and if I do that, will that also cause the data on the drives to be lost, or is it possible for it to mirror them again without needing to make changes to the data?
What should I be doing to my drives before building arrays with them?
Hitachi do a Drive Fitness Test and Seagate something similar but I have not been able to get either to work on a BootCamp Windows partition.
I tried formatting in Disk Utility and pulling some data on and off. I'm now running a scan for bad blocks in Drive Genius (is this worth it? It's going to take about a week at this rate). Anything else I should do?
Thinking of using 500GB and 750GB internal drives for a raid 0 startup disc (software raid obviously)?
Information:
Dual 2.5 G5
Mac OS X (10.4.11)
I have two choices.
1. Apple's Mac Pro RAID Controller, Four Drives, RAID 0+1. One big disk, highest cost.
2. Or, some other RAID Controller (?), Three matching drives, RAID 5. Then, 1 big drive for OS/Applications/Time Machine.
I'd probably move my Home folder to the RAID Array and have just my data striping amongst those drives. Has anyone had a dilemma like this before? I like the idea of hardware separation of my Home folder from the OS.
I have been reading about people taking a SSD drive for Boot and OS and using a second HD for their data using MCE's Optibay hard drive enclosure.
I would love to go this way but I can't justify spending all the cash on a SSD yet. Could I put in 2 500GB 7200 rpm drives and RAID 0 them? I know this wont be as fast as SSD but it should be faster than a single hard drive and hold a lot more storage for less $$$.
Does anyone know if it's possible to have two sets of striped drives using a single hardware RAID controller? I'm looking at the ARC-1210 and it seems like you can have more than one set of striped drives, but I'm not positive. My plan is to have two small SSDs set up for the boot drive and two HDDs for storage, each pair set up with RAID 0. Can this be accomplished using a single controller? Note: I'd just use OS X's software RAID but I need to keep the cores freed up for computation. I'm not concerned with redundancy--just speed.
View 2 Replies View Relatedi am considering running a Raid 0 configuration on my Powermac 2x300gb drives. Right now i have duplicated everything onto a 250gb drive and have successfully booted with this drive. Does anybody know what steps i need to talk to Raid the two 300gb drives and move everything back onto them?
View 3 Replies View Related