Mac Pro :: Frequent Crashes When Computer Is Sleeping?
Jun 29, 2012
I have a Mac Pro Early 2008. Here's my set-up: BootDrive (Mercury Excelsior PCI SSD 240 GB): contains OS X and applicationsDataDrive (2.25 TB RAID 0 with three 750 GB drives): contains files, pictures, music, videoTime Machine Backup (2 TB drive) Recently I've been experiencing frequent crashes. These mostly happen when the computer is sleeping. For example, I'll put it to sleep before going to bed, and I'll wake up in the morning to find it unresponsive when I attempt to wake it up. (Also: the computer tends to be waking itself up from sleep, i.e. I'll wake up and it will be powered up, even though I put it to sleep the night before.) When I notice that it has crashed, I hold down the power button on the tower until it shuts off, then press it again to start up. When I do, it boots into Safe Mode. Does this suggest a problem is due to a peripheral or drive?
The first time this happened, one of my internal drives got corrupted and I had to use Disk Utility to repair it. The second time it happened the permissions on my data drive got screwed up, and a few files on that drive got corrupted (including my Lightroom library). It just happened a third time, and once again the permissions on the Data drive are screwed up. If I recall, this all started happening after I installed the Mercury Excelsior PCI SSD. But it appears to be functioning well. I've run Verify Disk and it says it has no problems.
Info:
Mac Pro 2.8 (Early '08), Mac OS X (10.5.2), 10 GB RAM, 74GB 10k Raptor, 2x 750GB RAID, 23" ACD
View 14 Replies
ADVERTISEMENT
Sep 24, 2009
I'm new here to this forum and I'd like to get some advice. I've had my 2008 macbook 2.4ghz-160gb since august of last year. I upgraded it to 4gb of ram in the early stages and had no issues till lately.
For the last week, almost daily, Id get the beachball for a long period of time. This happens most frequently when I surf the internet. Occasionally this may occur when i play music in itunes but that is probably due to my library being store on an external hd. With that being said though, as I mentioned, it most likely occurs when I surf the internet. Many times, its not just a browser crash but a system wide crash where my mouse can move but when i click anything in the background, it would have no effect (but my mouse can move still). Only way to 'resolve' this was to do a hard shutdown and restart by holding the power button for few seconds. Of course, this issue keeps happening and it pissed me off so I looked around the net to find some possible solutions and many sites claimed flash being an issue. I uninstalled flash and retested and the problem still occurred. Reading maclife, it mentioned about some fsck -fy thing during boot up so i ran that test and found no errors. Restarted again, did some surfing and still the problem.
View 9 Replies
View Related
Jun 26, 2014
I use Mail on 10.9.3 with multiple IMAP accounts (but almost nothing the servers, all local in many folders). In the last days Mail started to crash several times a day, mostly when I interact with messages (replies, moving to folders, attachment stuff etc.) I am too fast for Mail - but that never was the case before and I have a fast machine and Internet connection.
View 3 Replies
View Related
May 28, 2012
recently my Mac Mini started behaving abnormally. I've started getting kernel panics and app crashes. I tried repairing permissions, repairing my disk and even reset my PRAM. I just bought my Mini 2 months ago so its new.
Info:
Mac mini, Mac OS X (10.7.3)
View 9 Replies
View Related
Apr 14, 2012
My MacBook pro started to throw frequent program crashes. I cannot nail this down to a specific program. I've repaired permissions, checked RAM with remember, even re-installed using internet recovery.
[Crash Report]
View 3 Replies
View Related
Aug 25, 2014
Since the last itunes update (May be a co incidence) , my 27" Mac keeps crashing with a white screen and flickering It then wont restart most times, even when using boot up options such as option, Cmd P+R. even removing power!waiting and restarting etc on most restarts wont work its a white screen.
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.4)
View 8 Replies
View Related
May 18, 2012
How can I set a password on my imac following sleep so no one can access except me?
Info:
iMac, Mac OS X (10.7)
View 3 Replies
View Related
Mar 8, 2008
I have an old Dell CRT I'm using currently with my iBook and I want to know how I can just use the display and close the iBook when at my desk without the computer sleeping. Currently if I try waking the computer with the keyboard or mouse, it wakes up for about five seconds before going back to sleep. Is there any way around this or do i just have to keep the iBook Open?
View 2 Replies
View Related
Mar 12, 2012
Whenever i put mac macbook pro to sleep, it only stays sleeping for about half an hour and then wakes itself up. It does it whether i close the screen or manually put it to sleep. When its awake, the system is running but the screen is dark unless i click a button.
View 5 Replies
View Related
May 22, 2012
I have a macbook pro MAC OS x and have started having issues with my computer's screen going black while working in iphoto. The only thing I can do is to press the power button to power down and then reboot. My memory is fine on the computer. All updates have been completed. Best I can tell, this only occurs while using iphoto.
Info:
MacBook Pro (15-inch Mid 2010), Mac OS X (10.6.8)
View 3 Replies
View Related
Sep 7, 2014
i have with my Mac Pro. When i'm watching videos on youtube on full screen, the computer starts freezing and crashes. it happens almost all the time. and not just streaming, today the computer froze just during checking a website without any "moving" elements.
i bought the computer around april 2014, it is a 6-core MacPro with 16 GB RAM, two AMD FirePro D700 video cards.it runs on OSX 10.9.4.two displays are connected over thunderbolt.
Info:
Mac Pro, OS X Mavericks (10.9.4)
View 10 Replies
View Related
Mar 2, 2010
I am attempting to load tiger onto my 12 inch PowerBook G4. The installation cd runs up to the first part when it asks you to restart. Then after the restart it up and comes up with a error message 'unable to find driver for this platform: "PowerBook6,4".' This is not the complete message as it is to long to type out. I have tried every thing I can think of fsck, repairing permissions, removing an after market ram and I have tried lots else.
View 4 Replies
View Related
Sep 30, 2009
I just rebooted my iMac for the second time after getting a system crash (the grey box on the screen that says, "You need to restart your computer..."). After I held the power button, and turned it back on, this message popped up AGAIN, but this time while it was still on the white screen.
Two system crashes... in a row?
-once while using the computer
-again while restarting it
Why did this happen twice? Overall I've noticed my iMac has been sluggish since installing Snow Leopard. I realized it happens whenever I plug in my Line6 TonePort (which is a USB device which switches the audio to go to my speakers via 1/4" outputs). I don't understand why this is suddenly causing the problem, it's been working fine for the last 2 years.
View 4 Replies
View Related
Aug 23, 2014
My computer keeps restarting itself while running World of Warcraft (and only WoW) and when it reboots I get an error screen that looks like this [URL]....
I have tried re-installing the game and even completely re-installing OSX. I have the most current version of the game installed.
Info:
MacBook, OS X Mavericks (10.9.4)
View 4 Replies
View Related
Dec 31, 2009
I recently installed os 10.6 on my MacBook, upgraded to 10.6.2 and everything was still working fine. Then, without thinking, I ripped out my shuffle and plugged in my mirrored (software) raid array of 2 drives. I immediately got the dimmed screen / you must restart your computer in all languages-screen. Now, whenever I plug in the raid into the usb the computer's screen goes dim and I get the same error message in all languages. I've tried booting with the install disk, still crashes. I have all my most important files on that drive.
View 1 Replies
View Related
Oct 11, 2010
I just installed Windows XP SP2 on my iMac and when I tried installing the Boot Camp disk my computer crashes in a blue screen then immediately restarts.
View 5 Replies
View Related
Mar 16, 2012
I am backing up now and realize I should reinstall the system but do I have to erase everything off the computer ?
Info:
MacBook Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
Dec 30, 2010
I am trying to create a partition with Boot Camp and install Windows XP SP2. Whenever i try to create a partition, the kernel crashes and i need to restart my whole computer, boot up from the OSX CD and then "Repair Disk" to get the lost hard drive space back. I had partitioned my HD last week, but then removed it, but now when i try it, it always freezes the computer. is there any way to solve this problem without my data being lost?
View 10 Replies
View Related
Feb 19, 2009
Everytime I start skype while in windows, the computer crashes and I get the blue screen... I think it has to do with the sound drivers, because when I'm using msn messenger also in windows suddenly the microphone mutes itself.
I tryed updating the realtek drivers with no help, updated skype, no help, I uninstalled the realtek drivers and the laptop did not crash anymore but I had no sound, any advice like for example how to get the microsoft drivers to work on the laptop without using realtek??
For whatever reason with the microsoft drivers,I think the sound is trying to come out of the digital outlet, I can see the ligth inside the jack, but nothing comes out of the laptop's speakers...
By the way, the vista version is Home basic.
View 5 Replies
View Related
Dec 21, 2009
I just had the original 300 GB hard drive fail in my aluminum 24" inch iMac running the latest update of Leopard. I wasn't able to save it using diskwarrior (diskwarrior said it was some sort of mechanical failure) but I was able to recover most of the data from it by booting from an external hard-drive.
So I went out and purchased a brand new Western Digital Caviar Black 1TB drive. The install went fine, it found the drive partitioned it and installed Leopard successful. Then is crashed and disappeared when I left it alone to run all the software updates. I came back and the computer was stuck on "Restart Required" after downloading all the updates. I went to hit restart now, and the system just hanged, wouldn't do anything. So I hard powered down the system and restarted it. It came up with nothing, just stuck on the White Screen of Death. So I plugged the external drive back in and booted from it. Mac OSX couldn't find the drive and diskwarrior would crash if I tried to run it. I tried to boot up from the OSX start-up disk and it couldn't find the drive either.
So I took the case apart and made sure all the connections were solid and the drive was mounted correctly. Everything looked fine so I plugged it in and it started up fine. Finished the updates and the iMac ran great.
So I thought maybe it was overheating, so I've installed smcfancontrol and started to monitor the temp of the drive. I also took the mac apart again and sucked out any dust in the fans or vents. The drive never goes over a 105 F, so it doesn't seem to be overheating.
However, this is where the problem is consistent: everytime the iMac goes into sleep mode, it crashes and the iMac is unable to find the hard-drive again. Unless I unplug it completely for 5 minutes or so. Once I unplug it, it finds the drive and operates like a champ.
I think maybe there's an issue powering the drive back on? Anyone have any ideas?
And my follow up posting later that day:
Quote:
So I ran some tests just to see if was an overheat issue, hard drive malfunction, or sleep issue. I decided to start encoding a video, pulled up Word, Power Point, Excel, started downloading all 6000 mail messages off my server (I never delete my e-mail :-/), also started installing iLife 09, and pulled up a bunch of webpages in Firefox with multiple tabs.
However, I shut off all sleep mode options on the hard drive. I let it run for an hour and came back. Everything is fine, hard drive isn't locked up and smcfancontrol shows the hard drive running pretty hot (115 degrees) but not so hot I'm worried. So it's definitely something to do the hard drives going into sleep mode and not powering back on. It's also weird that I have to leave the computer completely unplugged for 10-15 minutes before the drive is recognized again.
So turning off sleep seems to be my work-around, however, this shouldn't be a long term solution. I'm worried that there is a bigger issue with the iMac, but I'm not sure what would cause this. I've been a PC guy for years, this was my first Mac, and honestly I don't know enough about the inner workings to narrow this down. I would assume this would have to do with the motherboard in some way? But I'm not sure how you would even test it.
View 6 Replies
View Related
Sep 11, 2014
I am currently running Mavericks 10.9.4 and iPhoto 8.1.2 on my MacBook.
I'm waaay behind on organizing my pictures unfortunately, so I haven't worked in iPhoto for a while. When I try to export pictures to the computer it "quits unexpectedly". Hmmm, maybe I should see if there's an update. OK, so the only option it gives me is to spend $14.99 for iPhoto 9.5.1?!?!?
No more free upgrades for something I already own?
Info:
MacBook, OS X Mavericks (10.9.4)
View 1 Replies
View Related
Sep 8, 2014
Unlocking my external hard drive crashes my computer. It was encrypted by Time Machine (and I think that means it used FileVault because the unlock window has the FileVault icon).
There's a prompt to unlock the hard drive as soon as I plug it in but when I press the Unlock button my computer crashes.
I've tried different user accounts, safe mode, disk utility, recovery mode, different USB cables and different USB ports all with the same problem. As soon as I press enter on the password prompt the system crashes. If I type the wrong password it denies me so I know the password is correct.
The drive is in a SATA to USB dock but unfortunately I don't have another one to test with. Other drives work just fine in this dock.
The data recovery software I tried is useless because all the data is encrypted .
Info:
MacBook Air (13-inch Mid 2011), iOS 7.0.4
View 3 Replies
View Related
Jul 11, 2009
I have a late 2009 Mac Mini with 8GB of OCZ 1333 RAM and an Intel X25-M 160GB SSD. Running 10.6 fully updated and installed from scratch.I have been getting out of the blue crashes while the system is most of the times idle. Can it be the RAM? It's reported fine as 8GB 1333 DDR under the system info. The Intel SSD runs latest firmware.
This is the log from the last crash which happened a little ago.
Interval Since Last Panic Report: 139426 sec
Panics Since Last Report: 1
Anonymous UUID: 01A96B0F-D497-443A-8E19-9111DF3604EE
View 4 Replies
View Related
Mar 31, 2007
When I turn my computer on or wake it up, I am 'connected' or so it says, but I am never able to reach the internet until I (wait a long, seemingly random amount of time or) disable my wireless adapter, re-enable it, and select my wireless network.
I did not experience this problem prior to:
-Trying out a new AirPort Extreme, returning it and going back to my old G router. The AirPort worked great for this computer, but it had problems with the PCs and the xbox 360 (yes.. i know there is a workaround now...)
View 6 Replies
View Related
Mar 14, 2008
I have a linksys BEFSX41 v2.1 router (not wireless, hard wired) router. Ever since I hooked my macbook to it is appears that it drops and the reconnects regularly in regards to iChat. I am using my AIM screen name, and I receive this message "Error: Serv:RequestTimeout" frequently. This makes it tough because I can never tell if the person got my last IM or not, and since my screen name signs off and then back on again all the time it drives my friends insane.
I can get AV chat going, and I can use screen share with other macs. I enabled UPnP on my router in hopes that would work but it does not appear to have fixed it. I tried opening up a port that I heard AIM uses (5190) but that didnt fix things either. I'm thinking opening ports probably wont work since if I can IM people, or AV chat without having opened any ports then the program must be already opening ports as needed on its own.
View 6 Replies
View Related
Nov 26, 2008
I recently upgraded to OS 10.5 on two desktops. The PowerMac Intel works fine. The G5 Quad seems to be having weekly kernel panics and frequent software crashes (an example yesterday: Word and Safari were open. After a few minutes of no keyboard input whilst reading a webpage, Word crashed, followed by Safari). Running Maya seems to cause the kernel panics. It did so, once in a while, on OX 10.4, but with 10.5 it's become a frequent occurrence. Calling Apple (still on Applecare) doesn't help. They run some diagnostics and can't pinpoint anything. Clearly if they don't recognize the problem, they can't fix it. (I also run Maya on the PowerMac Intel with no problems, so Maya isn't the problem.)
Realplayer, streaming, has been playing during some of these occurrences — is this a known culprit? Any suggestions? Was the G5 Quad just a bad model? Can I turn off whatever causes the kernel panic alerts that freeze my computer? Should I be demanding more out of Applecare — is there anything I should expect them to replace? Should I downgrade to OS 10.4? If so, how do I do this? Many questions I know...
View 3 Replies
View Related
Apr 27, 2012
I recently (2 months ago) purchased a new mac book pro and migrated everything from my older mac book pro running Snow Leopard to Lion.Since moving to Lion I have been experiencing frequent crashes of Mac Mail, I spend a large portion of my work day in mail and experience this as many as a dozen times a day. Mac Mail will crash while
1) composing an email,
2) when clicking a link in an email
3) clicking the attachment icon to add an attachment
4) clicking on an attachment that has been sent to me
5) somestimes just trying to exit/close Mac Mail and the it hangs and I have tp force quit. After Mac Mail crashes and is restarted, clicking on the same link or attachment will workI have removed my mail IMAP folder and settings and re-established the connection from scratch but the problem persists.I have ran the disk permissions repair utility and the problem persists. I have ran the verfiy disk utility and it reports no problems.I have ran the Apple hardware tests including the extended tests and no hardware issues are found. Has one experienced somewthing similiar?Does anyone have any suggestions where to start looking for the root cause? All crash reports seem to look [code]
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
View 2 Replies
View Related
Dec 8, 2014
My MacBook Air has required a PRAM reset twice recently. Why is this? What can I do to prevent this?
Info:
MacBook Air, iOS 8.1
View 3 Replies
View Related
Dec 18, 2007
I'm using my G5 for both personal use and work so it's on all the time. It has worked flawless with this same hardware config for almost 2 years, but for the past week or so I've had about 4 to 5 kernel panics or complete system freeze a day. This happens when doing web browsing, Final Cut Pro editing, playing a game etc, so basically I can't pinpoint it to a specific application, or to a piece of hardware I've added. I have ran REMBER to test my ram and all seems fine.
View 1 Replies
View Related
Nov 21, 2010
As the topic suggests I keep getting kernel panics when playing games on the 9600 m GT (it never happens on the 9400 m). I never have kernel panics when playing left 4 dead 2, but I get them playing left 4 dead 1 and games like WoW and Age of Empires 3. Here is my crash report, and I don't game in bootcamp. Running 10.6.5 on a late 2008 unibody macbook pro. Can anyone tell me from the crash report what's going on?
Interval Since Last Panic Report: 208581 sec
Panics Since Last Report: 1
Anonymous UUID: 55F60F32-2766-4A42-924D-A9BE54D6B298
Sat Nov 20 20:51:58 2010
panic(cpu 1 caller 0x9cdbfa): NVRM[0/2:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd4000000 0x59b80000 0x096380c1, D0, P3/4
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)........................
View 1 Replies
View Related
