Windows On Mac :: Partitioning On Boot Camp - Kernel Crashes And Need To Restart Whole Computer?
Dec 30, 2010
I am trying to create a partition with Boot Camp and install Windows XP SP2. Whenever i try to create a partition, the kernel crashes and i need to restart my whole computer, boot up from the OSX CD and then "Repair Disk" to get the lost hard drive space back. I had partitioned my HD last week, but then removed it, but now when i try it, it always freezes the computer. is there any way to solve this problem without my data being lost?
I know this question has probably been answered somewhere, but I can't seem to find anything quite like my situation.
I'm resizing the Windows partition on a 2.2GHz 15" Macbook Pro. I deleted the partition using Boot Camp, but when I went back to repartition it, I get the error that states:
"The disk cannot be partitioned because some files cannot be moved. - Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume ..."
However, according to Disk Utility, there's only one partition on the drive, and it's correctly formatted. I'm not missing any hard drive space or anything. Is there any way to fix this without going through the hassle of reformatting my hard drive?
I setup boot camp yesterday and it messed up, blue screen of death, unresponsive, etc. I deleted the partition and I tried making a new one. 40GB out of my 250GB (173 Free). I got a error that said i needed to restore my system, i do not have a external hard drive and i couldn't do that. Then i figured out what this error means:I read it has something to do with not having enough memory, where i have to defrag something, basically it was a long explanation but it made sense (I just deleted a 50GB file).So i was able to make a 5GB partition, and i'm like, "Ok, it works, ill try a 32". I tried a 32 partition and it just sits at "Partitioning Disk". If i open disk utility i can see
I would like to say that this is my first post on the forum. Here it comes;I'm new with mac and would like to install windows on my black 3.1 Macbook. Boot Camp continuously fails at partitioning. I've read many articles about it which say iDefrag is the solution. So I did some defragments with iDefrag (the on-line, compact and the full-defragment) and tried to partitionate with Bootcamp lateron but it did not work. What should I do to fix this.
When attempting to partition my hard drive with boot camp assistant, it appears that for any size under 110 GB for my Windows partition, I am unable to set the size to anything that is a multiple of 10 (20, 30, 40, 50 GB, etc.).
I have just tried to install windows 7 released version 32 bit in a Boot Camp partition that was running XP just fine. I cannot complete the install process as I get a momentary BSOD and then the sytem goes into a never ending restart cycle. Will not boot in safe mode. Repair utility does not run. I have tried a fresh install 3 times. Anybody with ideas? This is on MacPro Dual processor about 3 years old. Plenty of RAM and HD space. MSFT support in India tries for 2 hours to help and then punts.
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
On Windows I noticed there was an icon in the bottom right (next to the clock) that I could right click and then restart in Mac OS X. Is there a similar thing for OS X that I can just click in the menu bar and restart in Windows?
1 - I have an early 2008 iMac 24" and ordered Snow Leopard disc from Apple 2 - After installation of Win7 64 bit and problems with boot camp 3.1 drivers support then tells me my computer will not run windows 7 64 bit and sends me a list of non-compatibles. Sure enough mine is one.
3 - Several respondents help me and it appears that 64 bit will run but still trouble with keyboard/mouse.4 - uninstall 64 bit and install 32 bit and related boot camp drivers5 - numeric keypad on apple keyboard still does not work with office 20106 - just tried to update drivers for win 32 but it says more current ones are installed??? I guess that is from the attempt to install 3.1 for win 64 unsuccessfully?7 - Now support lists computers that will not run windows 7 and mine is not on that list.
right now i'd be a happy camper if someone could just tell me how to get the Apple keyboard that came with my iMac and the numeric keypad working when in Windows or Office.
I keep getting this error..."The disk cannot be partitioned because some files cannot be moved. Back up disk use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."So I've checked and my HD is already a Mac OS Extended (Journaled) volume. I've gone to Disk Utility and verified the HD, verified permissions, and repaired permissions. I don't know what else to do. I don't want to backup the entire drive and format it.
I tryed using Boot Camp to partition a windows drive. I've used boot camp before and had no problems. Now when I use it i get "the disk cannot be partitioned because some files cannot be moved." It tells me to use disk utility and format my drive to a single mac os format. I can't because it's my mac internal hard drive. I've used disk utility to repair the drive but it didn't need it.
In retrospect, I should have ignored it when Apple Software Update told me about the Boot Camp 3.2 upgrade for my 2006 Mac Pro running x64 Win 7 ultimate. When I ran it, it overwrote my blue tooth driver and my keyboard stopped working. Thanks for the folks at Mac Rumors forums, I was able to go through the procedure to get it working again, and I also had to update the video driver (again) from ATI for my 3800.
So then I decide to reboot into MacOS and discover that my icon for selecting the boot disk was gone, not to mention any directory or programs in the start menu. This happen to anyone else? Do I have to downgrade to 3.1 or does anyone have a recommendation to get 3.2 working?
Out of the blue I keep getting a kernel panic (You must restart computer) while using my G4. All I use it for is word processing and internet browsing. Seems to happen when switching between windows.Here is my most recent crash log reports:
Mon Mar 26 21:27:00 2012 Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002B154200 PC=0x00000000000ACD04 Latest crash info for cpu 0: Exception state (sv=0x2708C280)
My imac has started to have a kernel panic all the time lately. It is where the whole screen will go darker and then a box in all different languages comes up saying I need to restart the computer. I have a couple of questions in relation to this, first if I reinstall and then back up from timemachine will I have the same issue again? If I do a fresh install and reimport all my music and vids manually will that be a better way to do things?
I just rebooted my iMac for the second time after getting a system crash (the grey box on the screen that says, "You need to restart your computer..."). After I held the power button, and turned it back on, this message popped up AGAIN, but this time while it was still on the white screen.
Two system crashes... in a row? -once while using the computer -again while restarting it
Why did this happen twice? Overall I've noticed my iMac has been sluggish since installing Snow Leopard. I realized it happens whenever I plug in my Line6 TonePort (which is a USB device which switches the audio to go to my speakers via 1/4" outputs). I don't understand why this is suddenly causing the problem, it's been working fine for the last 2 years.
Here's the problem. I'm trying to install Windows 7 Ultimate through bootcamp and the problem is, that when it restarts to boot and install from DVD, the screen goes black with the tickling white underscore and it won't load.
every time I start OSX, a box appears saying that the latest firmware for the EFI 1.4 or something has been successfully updated. Could it be related or is it something else?
My parents bought my younger sister a new MacBook a couple of days ago. She wanted me to install Windows on it so that she could play some games that she has.
So, I ran Boot Camp assisstant and installed Windows XP. XP itself runs fine. However, when I put in the disc from her MacBook that installs the Boot Camp drivers it gets to about Cirrus Audio (or something) and then crashes to blue screen. I tried installing the drivers a couple of times and then tried to reinstall XP and try again.
Starting up from any boot disk will give me a kernel panic forcing me to hard restart.
Background:
After many freezes I ran disk utility and I get:
Checking Catalog file. Invalid index key The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked Volume needs repair
So I use my wife's Imac startup disk to boot it in order to repair but I get the dreadfull death screen (I know how to press the C) I'm thinking maybe it's because her disk if for her Intel proc so I go and buy a copy of disk warrior 4, and same problem.
In my attempt to install Windows XP via Boot Camp, I accidentally inserted an SP1 disc instead of the SP2 disc that I have. The installation proceeded to the point where it does for most who attempt this: the screen where you are prompted to press ENTER. I could not proceed and therefore restarted the iMac and held down the mouse button upon start-up to remove the CD.
HERE IS THE PROBLEM:I can not boot into OS X because the keyboard shortcuts (those that might allow me to select which partition to boot from and/or reset PRAM) seem to be disabled. Instead, a reboot always ends at a black screen with a blinking DOS-esque cursor, or the prompt: "No bootable device -- insert boot disk and press any key."
I have attempted inserting my SP2 disc at this point, to no avail. My keyboard seems to be disabled, as if the SP1 install proceeded just enough to establish itself as the boot drive without drivers for the keyboard. I've tried using all 3 USB ports, disconnecting other USB devices. Oddly, my bluetooth mouse works to eject the CD on reboot...
I created a Boot Camp Partition (an entire drive, actually) and installed XP. The install went off without a hitch ... Except, having rebooted to Mac OS X (10.6.1) there is no way to boot Windows again. Going to Preferences->Boot Disk shows no Book Camp bootable drive.
This is the 1st time i got a Mac , i bought a black Macbook 2.4GHz some days ago .
I installed Windows Vista Ultimate using Boot Camp , and all went smoothly .
Only 1 prob is when restarting , i have to wait too long for the Windows to log on , i think about 1min with the black screen.
And if i want to boot in Mac OS , i have to push down the D button or the Alt, it takes quite a long time too .
So do you guys have any solution to this problem ? I want to get rid of the waiting time, way too much.
And do you know how to make my Macbook jump right in the choosing section when it starts ? ( so that i dont have to push down any button when it starts )
I have a Powerbook G4 with an error message when I boot. "You need to restart your computer. Hold down the Power button for several seconds or Press the restart button". Restarting the computer doesn't work.
I have been trying to install Windows 7 (yes, legit copy) to my Macbook Pro the whole day, but I keep on getting this error message saying "Press any key to boot from cd or dvd . . . ."
When I press any key on the keyboard, nothing happens. I know this copy works because I've tried this on VMWare 3. (I'm going to Boot Camp of BIOSHOCK!)
What I've Tried:
Deleted partition, recreate partition and choose the Windows 7 disk as startup disk.
Well I installed Vista Ultimate using boot camp on my 27 inch iMac using 10.6.2 and now I can't get it to boot in OSX. I tried holding the command key when rebooting but it just goes into the windows part. Looks like windows took over. Does anybody know how I can get it to boot in Leopard?
Have the new 15" MBP with i7 Processor. I had another MBP with a 7200RPM drive and installed drive in the new i7 Mac. Computer was working fine until I installed Windows via Boot Camp. I can't boot to the Mac Partition any more, the partition is there but when you try to boot to it you just see the Apple logo and NO circle. I cannot boot to the install CDs or a bootable external drive. I target disk mode the computer and used another computer to boot using the drive in the i7 unit and it's fine and I can see all the information. I tried booting the i7 into single user mode and saw the following message:
With my Macbook, I just did a software update to be able to use the newer version of AIM. So I let the updates install and the let the computer restart. So when I turn it on I keep getting this message: You need to restart your computer. Hold down the Power button for several seconds or press the Restart button.
I installed XP onto Boot Camp, so I can run some Windows games on it. At first, it didn't seem like it was that bad but after loading Sims 2, 2 expansion packs and 1 stuff pack it was a little... different. Windows still starts up pretty quick and everything, but in OS X... the performance has been decreasing slowly. Doesn't the things only affect the things in the Windows partition instead of OS X? Safari's performance wasn't as smooth as it used to be.
