Mac Pro :: Amount Of Additional RAM And Distribution Of It?
May 31, 2009
I wanted to dedicate a separate thread to this question, since I think it's a big enough topic of its own.
1. How much RAM is enough? Obviously the more the merrier, but after a point it gets too costly, and I'm sure there are diminishing returns.
What do you think about 12 (6x2GB)?
I will be doing HD video editing, Audio recording in Pro Tools and Logic, and Photoshop processing.
2. Distribution - does distribution of RAM affect performance in any way? For example, is having 6 slots filled in with 1 GB ram sticks, and the other 2 filled with 3 GB sticks a good idea? Or is it better to distribute them evenly? Do certain slots get preference?
I probably still have my PC hat on but here is my problem.
In Address Book on my IMac, I have set up numerous cards with name address phone numbers email addresses, notes etc. Each card has AT LEAST ONE email address but can have up to THREE email addresses (home,work, other).
I have taken 13 cards and created a GROUP
Two questions:
1. Can I email the address card or copy of the card to an email address for review and updating?
2. Can I send an email to ALL OF THE EMAIL ADDRESS in the GROUP?
I am thinking that to do this (#2) I might have to set up individual address cards for each email address for each group member--yuk. I just want to send to home, office and other by just clicking on JONES or SMITH or better yet the distribution list I have set up.
If I have a "group" in Address book, how do I edit "which" email is the address to use for each user in that group? Back in Snow Leopard, there was a discussion article that said iCloud broke the ability to edit a distribution list, but that it would likely be fixed in Lion. how to do this in Lion? No matter what I do, that option is greyed-out in my Edit menu.
What if Apple starts putting their programs like iWork, iLife, and all of the other semi-small file sized software onto flash drives? That way people who have MBA's could load their software on without using a 99$ superdrive or whatever else. I think that would be cool if companys began to do that with small sized programs, especially now that flash drives are becoming much cheaper.
I've never owned a MacBook or mbp, so I'm not sure about the macbooks in this regard. I know the mbp has the case that helps distribute heat. Does the new macbooks get hot on the bottom like other laptops? Looking to buy one for my wife and she doesn't like how hot some laptops get when on her lap.
I am wondering how can I administrate multiple Mac workstation across LAN as well as distribute software mpkg. I am thinking of doing this because I don't have a Xserve and ARD is just too expensive.
i purchased omnigraffle for my mac pro several months ago. i just recently purchased a macbook pro and would like to have access to that app.Â
when i recently copied omnigraffle from the mac pro to my laptop, i get the dialogue to use licensed, unlicensed, or purchase.Â
then, went to the app store/purchases and the store wouldn't verify my license. i deleted the app as a possible solution to install through the app store. now, i'm getting the response: 'the product distribution file could not be verified'Â
I can't get around the above error trying to download an app. I re-downloaded and installed 10.7.3 and I am still having the issue. I tried downloading a different app (Kindle) and it worked fine but I can't get Windows Phone connector 7 to download. Â
Would people be interested in an Apple distribution of Linux that included a good implementation of AFP with spotlight, extended attributes and ACL support, a Mac focused version of OD with work group management, client side tools (like Server Admin) for OS X clients, and migration tools for current Mail / Cal / iChat server setups, perhaps even partnering with Kerio. This way you could run it on any server hardware you wanted, the drivers for those servers would already be available, and they could leverage the already robust services Linux offers like DNS, DHCP, SMB and other network services. Xsan for Linux (think MDCs) would be trivial since it's already supported with StoreNext.
I have taken some measurements from my PSU and since I have not seen this sort of info posted anywhere else and it is not in the service manual I thought I'd share it here.
refer attached
Note ** The voltage on pin 4 varies according to the temperature of the PSU and ranges between 1.7V and 2.5V - Higher voltage = lower temperature.
I bought a refurbished MacBook from Micro Centers, with the Leopard operating system on it. I upgraded the memory from 2G to 4Gig. I bought Snow Leopard and upgraded the operating system. Then I bought Lion from The App Store and downloaded it. Everything seems to be working fine except when I try to download Apps from the App Store, I get a warning saying "We could not complete your purchase. The product distribution file could not be verified. It may be damaged or was not signed." I am new to Apple products.
've been trying to update iPhoto for over a month now and every time I try I get an error message saying "The product distribution file could not be verified. It may be damaged or unsigned.)Â I tried to uninstall it tonight and then reinstall but now when I go to the App Store to try to download it, it tells me the same error message except now I can't even redownload the file or anything.Â
I've installed a Mac Mini (unibody) on a friend's boat and have the display output through the HDMI port througha distribution amp to 3 TVs. I have been having resolution difficulties though. When the display is output this way (split three ways) the resolution does not fit the displays, and there is no means to change it to a setting where it will fit the TVs. All TVs are full-HD and 1080p. The screen expands outside of the viewable area.
While i am trying upgrade the mac os 10.7 to mavericks but i can't upgrade it's shows error "The product distribution file could not be verified. It may be damaged or was not signed".
I've got a quad core mac pro and I'm looking to put more RAM in than the originally shipped 1 gig (2 x 512). I've seen all the helpful links for what chips to put in which riser, however I've also seen people mention keeping things in multiples of 4 or 2.
I'm looking to put in 2 x 2 for 4 additional gigs, and keeping the original 1 gig. This would bring me up to 5 gigs total, but is it a bad idea to have 5 since that is an odd number? Or is it ok because it uses up 4 slots? 6 gigs might be a little more than I can presently afford/truly need.
I just recently got a Macbook Pro 15" and is wondering how much ram it can hold. It's mid-summer, currently holding 2gb in its 2 memory slots totalling 4gb of ram. It's the $1799 version. I've been trying to find out in the internet but they're all from the older versions.
More Info=Processor 2.3 GHz Intel Core i7Memory 4 GB 1600 MHz DDR3Graphics Intel HD Graphics 4000 384 MBGraphics NVIDIA GeForce GT 650M 512 MBI just want to know how much it can hold so I can plan on upgrading later on.
Apple.com states that snowleopard is 64bit? And that because it is 64-bit it can run huge amounts of ram? Does this mean my Intel IMac (white) can run more then 3gb ram if I get snow leopard? or will I still be limited to the 3gb cause of my hardware?
My grandma just got a sweet new dell 17 inch studio laptop, shes moving up from Windows ME My grandpa also moved into the digital age by buying a super nice canon dslr I put the pictures on their harddrive and now I would like them to send it to me, I have no idea how to send that many pictures, the folder is probably to large for her verison email thing. Any one have any ideas?
I have got a last generation mini with the GMA 950 graphics. What I am wondering is wether I can change the amount of memory that is used by the graphics?
A few months ago I bought a new LaCie "Little Disk" external 500 GB HDD. Has Firewire and USB power.
Formatted for both Windows and Mac (Fat32). Everything was going fine. One day the disk would not eject. That is when the problems started. I had to manually remove the disk without ejecting.
Having done this with my other LaCie external HDD without any future problems (it would always remount) I didn't think anything of it.
Since then, the disk will not mount on either the Mac or the PC. The disk will not mount using the Firewire or the USB power connectivity even though the blue power light is on.
When I open Disk Utility with the LaCie plugged in, Disk Utility crashes. When I open Disk Utility before the LaCie is plugged in and then plug the LaCie in afterwards, it crashes.
I tried plugging the LaCie in before booting my MacBook to see if that worked, but that method prevented the MB from booting at all!
Contacted LaCie about this but have yet to hear back. I'm convinced that this can be solved cleanly without any data loss. Suggestions?
If I buy the $2199 MBP that has 256gb of flash storage, is it possible to upgrade the amount of storage, lets say to 512gb later when I run out of space? Or am I stuck with only 256gb forever?
I have the 2.2 blacbook, 4gb ram, 320gb hdd. Now when I first bought my macbook, I did not use Illustrator or Photoshop CS3 (for both). Now 1.5 years in, I am using Illustrator and I noticed that when I am working on both (either at the same time, or with one program closed) I sometime get the message in Illustrator "Not enough memory" or "Not enough ram" or when I am saving an image for web and devices "an unknown error has occurred"
BUT if I use Illustrator and Photoshop CS3 (for both) on Vista via bootcamp none of these errors occur. I just don't want to imaging what will happen when I use CS4. Is this due to the way Leopard is setup? I am also looking to upgrade...So do you guys think the new macbook or macbook pros would be better? I mean, my current macbook is holding up well...but I just hate these errors. I prefer to work in Leopard than Vista.
I was viewing the specs on my mac, and for memory 2 GB is shown. When I bought it, I chose 4 and I am pretty sure when I checked it few months back it showed 4. I am doing all this in Leopard. Now it's only showing 2 GB, any idea on as to why?
Okay, I think this is the right thread to discuss this in, if it's not I apologize. So I got a 13" unibody MacBook back in February. I've got a 2 ghz Intel Core 2 Duo, and 2 gb 1067 MHz DDR3. I'm starting to run out of hard drive space, plus I want to dual-boot Windows 7 when it comes out, unfortunately we still live in a PC dominated world.
My questions are, if I replace it myself this will void my warranty won't it? I didn't buy any sort of AppleCare with my MacBook so I just have whatever the standard warranty is.
Second, is there a limit to the size of hard drive I can put in there? Does it have to be made by a certain manufacturer? And at any size does it start becoming unstable with my amount of ram and processor?
I'm using Toast 10 to burn a .mkv file to DVD format.. seems like the encoding is taking forever.. maybe 9 hours by the time it's done. Is this normal? what do you guys use and how long does it take.
Yesterday at around 3 PM i spilled a small amount of slightly sweetened coffee onto the upper left corner of my new 15 " Macbook Pro. The coffee barely got onto the keys and the speaker, but pretty much drenched all of the ports on the left side. The notebook immediately turned off, and in panic mode i tried switching it back on to see if any serious damage had been done. The notebook turned on, but the screen was blank. While i was wiping off the excess on the outer case, i realized this was a dumb move to make (because it probably shorted something) so i turned it off after a minute or so. I took it home and unscrewed the back case, there was very little coffee on what i think is the upper right hand side (when overturned) of the logic board, so i soaked it up as best i could, blew on it for around an hour, and set it on its side with a pretty hot lamp shining on it overnight. I put it back together this morning more than half expecting for it to just not work, but to my surprise it seems to be working fine. No keys are sticking, the battery is charging well, and on the internet with it right now.
The problem is that there was a what looked to be a little bit of a singe on one of the black rectangular transistor prongs. The melted metal easily blew away and most of the prongs are still attached. also, i haven't taken out the logic board to see what kind of damage (if any) has been done to the hidden side (not the side that shows when you take off the back case). I'm planning on doing this as soon as i can get a torx driver. I guess what I want to know is if i should take my chances with bringing it in to the apple store to see what the real damage is even though it still works, or if i should just hold out and use it till it breaks.
I have a 13" MacBook Pro Unibody with 2gb of ram in it. I am waiting on my 4gb to come in the mail and I am going to replace it tomorrow. Currently I am dual booting into Windows 7 with VMWare and it only has 512mb allocated to it. Is there anyway I can reallocate a different amount of RAM to Win 7 without doing a full reformat?
over the last few days my harddrive has went from 98 gig free , down to 75 , then 39 right down to 3 gig , im not d/l anything . have not installed anything except snow leopard , have rebooted sevral times , each time it shows a diff size of free gig . i run Calm XV it found nothing
probably a slam dunk answer out there. I have been instructed to Open the Finder and Highlight MacIntoshHD. But when I click on the Finder, I see:About Finder, Preferences, Empty Trash, Secure Trash, Services, Hide Finder, Hide Others. What am I missing?
Info: MacBook Pro, Mac OS X (10.6.8), New to this community.
