I just recently got a Macbook Pro 15" and is wondering how much ram it can hold. It's mid-summer, currently holding 2gb in its 2 memory slots totalling 4gb of ram. It's the $1799 version. I've been trying to find out in the internet but they're all from the older versions.
More Info=Processor 2.3 GHz Intel Core i7Memory 4 GB 1600 MHz DDR3Graphics Intel HD Graphics 4000 384 MBGraphics NVIDIA GeForce GT 650M 512 MBI just want to know how much it can hold so I can plan on upgrading later on.
I want to know how to find out what is the max amount of ram my computer can actually take advantage of, rather than tell you my model and you tell me what is the max because I know it varies according to the model of the Computer Â
here is my model: Macbook(13-inch, Mid 2010 [unibody]) basically the latest version of the white macbook.
A few months ago I bought a new LaCie "Little Disk" external 500 GB HDD. Has Firewire and USB power.
Formatted for both Windows and Mac (Fat32). Everything was going fine. One day the disk would not eject. That is when the problems started. I had to manually remove the disk without ejecting.
Having done this with my other LaCie external HDD without any future problems (it would always remount) I didn't think anything of it.
Since then, the disk will not mount on either the Mac or the PC. The disk will not mount using the Firewire or the USB power connectivity even though the blue power light is on.
When I open Disk Utility with the LaCie plugged in, Disk Utility crashes. When I open Disk Utility before the LaCie is plugged in and then plug the LaCie in afterwards, it crashes.
I tried plugging the LaCie in before booting my MacBook to see if that worked, but that method prevented the MB from booting at all!
Contacted LaCie about this but have yet to hear back. I'm convinced that this can be solved cleanly without any data loss. Suggestions?
If I buy the $2199 MBP that has 256gb of flash storage, is it possible to upgrade the amount of storage, lets say to 512gb later when I run out of space? Or am I stuck with only 256gb forever?
I have the 2.2 blacbook, 4gb ram, 320gb hdd. Now when I first bought my macbook, I did not use Illustrator or Photoshop CS3 (for both). Now 1.5 years in, I am using Illustrator and I noticed that when I am working on both (either at the same time, or with one program closed) I sometime get the message in Illustrator "Not enough memory" or "Not enough ram" or when I am saving an image for web and devices "an unknown error has occurred"
BUT if I use Illustrator and Photoshop CS3 (for both) on Vista via bootcamp none of these errors occur. I just don't want to imaging what will happen when I use CS4. Is this due to the way Leopard is setup? I am also looking to upgrade...So do you guys think the new macbook or macbook pros would be better? I mean, my current macbook is holding up well...but I just hate these errors. I prefer to work in Leopard than Vista.
I was viewing the specs on my mac, and for memory 2 GB is shown. When I bought it, I chose 4 and I am pretty sure when I checked it few months back it showed 4. I am doing all this in Leopard. Now it's only showing 2 GB, any idea on as to why?
Okay, I think this is the right thread to discuss this in, if it's not I apologize. So I got a 13" unibody MacBook back in February. I've got a 2 ghz Intel Core 2 Duo, and 2 gb 1067 MHz DDR3. I'm starting to run out of hard drive space, plus I want to dual-boot Windows 7 when it comes out, unfortunately we still live in a PC dominated world.
My questions are, if I replace it myself this will void my warranty won't it? I didn't buy any sort of AppleCare with my MacBook so I just have whatever the standard warranty is.
Second, is there a limit to the size of hard drive I can put in there? Does it have to be made by a certain manufacturer? And at any size does it start becoming unstable with my amount of ram and processor?
Yesterday at around 3 PM i spilled a small amount of slightly sweetened coffee onto the upper left corner of my new 15 " Macbook Pro. The coffee barely got onto the keys and the speaker, but pretty much drenched all of the ports on the left side. The notebook immediately turned off, and in panic mode i tried switching it back on to see if any serious damage had been done. The notebook turned on, but the screen was blank. While i was wiping off the excess on the outer case, i realized this was a dumb move to make (because it probably shorted something) so i turned it off after a minute or so. I took it home and unscrewed the back case, there was very little coffee on what i think is the upper right hand side (when overturned) of the logic board, so i soaked it up as best i could, blew on it for around an hour, and set it on its side with a pretty hot lamp shining on it overnight. I put it back together this morning more than half expecting for it to just not work, but to my surprise it seems to be working fine. No keys are sticking, the battery is charging well, and on the internet with it right now.
The problem is that there was a what looked to be a little bit of a singe on one of the black rectangular transistor prongs. The melted metal easily blew away and most of the prongs are still attached. also, i haven't taken out the logic board to see what kind of damage (if any) has been done to the hidden side (not the side that shows when you take off the back case). I'm planning on doing this as soon as i can get a torx driver. I guess what I want to know is if i should take my chances with bringing it in to the apple store to see what the real damage is even though it still works, or if i should just hold out and use it till it breaks.
I have a 13" MacBook Pro Unibody with 2gb of ram in it. I am waiting on my 4gb to come in the mail and I am going to replace it tomorrow. Currently I am dual booting into Windows 7 with VMWare and it only has 512mb allocated to it. Is there anyway I can reallocate a different amount of RAM to Win 7 without doing a full reformat?
Mid 2010 13". The computer crashed. Wouldn't start. decided to reinstall os x. The progress bar is full but at the bottom it says Time Remaining: about -1hours and -53 minutes. And the amount of time just keeps increasing. Anyone know whats up? or is that how it goes?
As soon as I unplug the mac from the wall - it dies. its not even 30 days old. I presume this is a defective battery? there are no lights on the side at all
Info: Mac Pro, Mac OS X (10.7.3), MAC PRO NEEDS AN UPGRADE!! More PCI
i have a macbook pro mid 2010 and i was wondering what the max storage was. i am hoping to put in 3 terrabites and was wondering if that would be compadable.
I have a 11 inch macbook air and was wondering if anyone has opened it up, to see if the thermal paste is applied with the correct amount. cus i know the rev A B and C had way to much thermal paste.
- i thought leopard osx was 64bit - so why are there some threads questioning if the current macbooks will support 64bit?- in snow leopard the max amount of ram will be increased. is there any firmware that apple can release to increase the amount of ram that can be recognized in the macbooks?
I have a late 2008 macbook pro 15" that currently has 1 gb ram in one slot and a 4 gb chip in the other for a total of 5. Can I replace the 1gb chip with another 4 gb chip? Will it recognize 8 gb?
My Macbook Pro won't hold a wireless signal. I don't have another wireless signal to test, but have tested other devises which connect fine.
'07 model MBP core duo running OS4.11 + original Airport (hey it still works). The MBP will only stay connected now if my base station within 10' or so. It might connect 30' away, but looses the signal after loading a few pages online. It seems like its getting worse -- maybe not, but seems like it is. I can connect just find with my other MBP, iPod (streaming audio across the house, etc) and PS3.
In the last two weeks, my Air will not hold after I Shut Down or Suspend, battery seems to work fine if I'm using it (drains normally). When I turn it on it's at 0%. Plugging it in will charge to 100% in ~30 minutes. Did SMC reset did not resolve problem. I don't believe there are any hardware issues.. Will a format fix this? All software is up-to-date.
i have a 09 13in macbook. the battery won't hold a charge at all. my is how many charge cycles can i have before i have to buy one thats not covered under the protection plan
I do video editing and I felt like it still not fast enought fo rendering files, So I have heard from many mac user said " Macbook pro can hold up to 16 gb of ram. But the shop won't recomment that
I have 750GB MacBook Pro and up until the other day I showed 250GB used and 500GB unused. I discovered this because the past two days my computer would just freeze and I couldn't do anything. So I ran the Disc Utility and it found some errors and fixed them. So I'm wondering if the 400GB of lost disc space now has something to do with the computer locking up? I've searched all the folders and added up their size and still come back to 250GB that I can see. So I'm assuming there's something hidden somewhere that's eating up over half my hard disc space?
Info: MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4)
I spilled a small amount of liquid on the key board, but I quickly dried it and everything works fine except the keyboard. Some keys are brighter than others, what should I do?
My 15" early 2008 MacBook Pro won't shut down unless I hold the power button. I have done extensive searches and have done the following and the problem still persists. I have pulled the battery to reset the SMC or whatever it is called. I ran disk utilities and repaired the permissions. I deleted unnecessary files in the preferences folder...... still no go..... in fact it won't load software updates because it gets hung up.... then I have to force quit it by holding the power button..... I am at a loss.
Is there a good, sleek, slimline, and stylish hard cover out there to fit this model? When I first purchased the notebook, all of the hardcovers looked horrible. But now some of the new MBP models have fantastic covers available. Also, it's important that the cover doesn't hold in any heat since I do a lot of GPU and CPU intensive work.
I put my 17" Macbook Pro to sleep overnight without the power adapter two nights ago, and when I woke up yesterday it wouldn't turn on, even with the power adapter plugged in. The battery was almost dead when I put it to sleep (2% charge), but after leaving the adapter plugged in all day yesterday the battery indicator on the bottom only has one light glowing solid.I've removed the battery and tried to start it with just the power adapter, I've tried Ctrl+Cmd+Power Button, I've reset the PRAM, I've reset the SMC, and it still doesn't work.
My macbook won't show the screen where you hold down the option key and it won't show the apple logo or the spinning gear just a blank white screen when I turn it on. I replaced the old hard drive with a brand new 500 gb 2.5 inch data hard drive.I also purchased a brand new copy of OS X 10.6 Snow Leopard.when I put the disc in and power it on holding the option key nothing happens just a white screen with no apple logo or spinning gear.
My new MBP won't let me select multiples items when I click the first icon, hold shift, and click the first one. I'm burning photos on dvds so not being able to do this is EXTREMELY frustrating.
My wife's Macbook 2.1 is acting strangely. The Battery indicator led's are full (green) the charger led is also green and the software shows 100% battery is charged. After a couple of seconds after disconnecting the charger it switches off. I've tried resetting the SMC and this allowed a full nights use without the charger but on the next day it went back to only holding for a couple of seconds. I don't want to have to reset the SMC every day. It's running on 10.5.8 and is all up to date.
Info: MacBook, Mac OS X (10.5.8), 2GHZ Intel Core 2 Duo 3GB SDRAM
