Mac OS X Lion Server :: Unable To Edit Permissions
Feb 1, 2012
I'm trying to edit permissions on a folder via the Server App, and having some trouble. I can access all of the other folders on the shared volume and edit them just fine, but on one folder the OK button is always grayed out. Here's what I'm doing: In Server App, selecting the server under StorageChoosing the drive I want to editSelecting the folder I wantUnder the gear, choosing Edit Permissions.It shows me the list of users just fine and I can see that there's a problem, but no matter what changes I make it won't let me click OK. It also won't let me click + to add a new user.This works fine on all of the other folders on this same drive. Should I just reset all of the ACLs for that folder in the Terminal and try again?
View 1 Replies
ADVERTISEMENT
Jun 2, 2010
I have been working on a project in iMovie for a few days, and it has been working perfectly. Today, I opened up my project and I could not play the project (the red line would move, but no picture would show up in the upper right hand corner box) and ALL of the options in the "share" tab were gray and unable to click them. Many options in the "edit" and "file" tabs were unable to be clicked as well.
Another project i completed months ago is working perfectly. The clips in the events play/show up on the window in the upper right hand corner
View 2 Replies
View Related
Jul 6, 2012
Looking for a bit of help with permissions on a lion server.We have a Transfer folder where files are exchanged on our network.All staff have the "general" group assaigned to their username.So on our Transfer folder, the permissions that i've set are
General - Read Write
root - Read Write
staff - Read Write
Others - None
When one user uploads a file its fine, but when another goes to overwrite the file it says they dont have permission. Looking at the file, the permissions don't revert back to the server. The file ends up with permissions like.
general - read write
(persons username) read write
staff - Read only
Others - Read only
View 7 Replies
View Related
Mar 27, 2012
I'm using mac os x server as SMB file sharing server and i got some issues with permissions.
I try to use POSIX permissions. I put :
owner -> read & write
group -> read & write
other -> read only
And after propagate these permissions it's working fine.
Until an user create a folder or a file and i see that the permissions of it are :
owner -> read & write
group -> read only
other -> read only
I have set default permissions on new files and folder for this sharepoint with the great permissions for the group. But it didn't work..Someone have a solution ?
Info:
Mac mini, Mac OS X (10.6.6)
View 2 Replies
View Related
Mar 17, 2012
I'm aware of how enabling sFTP support in Lion Server by enabling SSH access in the Hardware settings.
Now, if I do log in using sFTP in Transmit client Software with a normal user account who should be able to access via SSH but got only permissions for the "Public" folder on the Server, that user via SSH/sFTP can see/access the root Directory of the server anyway!
how to set specific folder permissions to users using the enabled SSH/sFTP option?
Info:Mac mini, Mac OS X (10.7.3), Mac Mini late 2007 - 2GB RAM - 2Ghz
View 2 Replies
View Related
Apr 8, 2012
I have a mini that had the latest Lion Server installed and was being configured, I know very little about servers and it would appear my friends who were helping set things up know even less. As I have now found out tomy cost. This was a refurbished MMserver direct from Apple - preinstalled with Lion Server. After it was almost configured with admin, users, filesharing, mail, ical etc and ssl authentication, a bunch of new users, groups etc suddenly appeared in the admin interface. All these were deleted to leave only the ones that had been set up.
Now the users we set up along with admin can log and use the machine as a user but cannot do anything that will affect the systemas they do not have permissions. Even the names with server permissions have been restricted access When logging into the server app I get the following message. Msg: This server is not supported. Server supports servers running Mac OS X 10.7.
If I go into Apple Software Update it wants an administrator's name and password...the one used to log into the system in the first place no longer works. Given there is no data / files of importance on this machine, I thought I would use Disk Utility to start again but hit the same issue of not having permissions. I have tried all the names and passwords I know and which were used and non have worked. If I then use cmd+r on boot up nothing happens it just continues to boot to the log in screen,
I looked in server admin and nothing is registered and when i add the server name..it just searches but does not do anything. How can I get this back to to the start - a virgin system....so I can start setting it up?
Info:
Mac mini, Mac OS X (10.7.3)
View 2 Replies
View Related
Mar 23, 2012
I'm trying to setup a Lion Server as an internet server - not as a web server - I need access to a different port.When I use the Server UI to go to Web, I can select to edit my domain name but then in the edit window, the Domain Name field is blank, and I can't change anything such as the port, SSL Cert, etc.As best I can tell, I have the DNS setup but I'm not sure I've done it correctly. I can add a second domain name and can edit the details for that. I'd hoped I could delete the first one or swap them but no luck.I can't access the domain name from outside the LAN but it may have just not propagated yet. I can access the IP address and do see the default home page.
View 8 Replies
View Related
Jul 5, 2012
I would like to move my service data to the newly acquired Promise Pegasus.
Server.app -> Server Name: Settings: "Edit" button next to "Service Data" is greyed out.
Info:
Mac OS X (10.7.4), 8GB, 2,93 GHz Intel Core 2 Duo
View 3 Replies
View Related
Apr 8, 2012
I used a trick, long since lost I'm afraid, to tell the Finder to display the UNIX path name of the current directory at the top of the Finder window.For example, a finder window with my Documents folder selected(i.e. "in" the Documents folder) normally shows the special Documents folder icon and the name "Documents".What the trick would have it show instead is:
"/Users/cprice53/Documents"
I've started over with a clean install of Lion (jury still out on the wisdom of this)so even if the setting would still work, I don't know how to make it. how to do this in Lion?
View 6 Replies
View Related
Feb 5, 2010
I want to edit this file but when I want to save it says: Document 'xxxxx' cannot be saved. You do not have write permissions. [URL]
View 8 Replies
View Related
Nov 22, 2009
I have noticed something strange in Snow Leopard when dealing with file permissions in a Get Info window. Previously, in Leopard, when I would Get Info on a file and open the "Sharing and Permissions" tab, I would be unable to edit permissions until I had clicked on the lock icon and entered the admin password.However, I have found that in Snow Leopard, I can edit permissions with the lock icon closed. It doesn't even ask for a password to change file permissions. I have been searching around to see if anyone else had noticed this, but to no avail. I am concerned, as not having to enter a password to change file permissions could be a bit of a security issue, couldn't it? I also don't believe it to be specific to my machine, as I have access to another Snow Leopard computer and it is the same there.
View 8 Replies
View Related
Oct 31, 2010
i accidentally set permissions in the Mac HD Info window for Everyone to "No Access". of course it locked up. i have an external drive plugged in running Time Machine. i understand i can use that to restore...?
I ran disk utility - it failed because it could not locate the clip art folder in word (?wha?) repair disk permissions ran for 24 hours and couldn't complete. anyway - I know there is an easy solution here - i just want to be sure i'm doing it correctly so i dont make it worse than it already is...would some kind soul please provide me step-by-step instructions to either use Time Machine to repair - or something.
View 2 Replies
View Related
Feb 28, 2009
I repaired permissions earlier and I keep getting these that won't be repaired. Is it anything to worry about? Any idea what the issue is?
View 2 Replies
View Related
Mar 30, 2012
file permissions - how to edit a user account that is creating files with permissions that are not wanted anymore. i understand how to reset permissions on files or folders, but i do not understand how to reset the permissions a user is "creating". ie, each time this user creates a file, the file needs to be manually edited for its permissions. so i need to edit the user's settings, but i can't find where to do that. this is a home office setup. we have two users with admin privileges. our imac is acting as a server of sorts - it holds common files that need to be edited by both users. the other user is typically working on shared files from a macbook over wifi.
Info:
iMac, Mac OS X (10.6.8)
View 8 Replies
View Related
Jul 15, 2012
I just bought a new 27" 3.4GHz i7 iMac to replace my agin iMac running Snow Leopard. Every time I turn the sharing on so that I can access the iMac and the attached hard drives from my other computer all the permissions explode to in infix able stse where I have to flatten the drive and reinstall Lion. I've spent hours on the phone with Apple, troubleshooting, running bits of code in the terminal all with the same result which is the permission going ****** (including bad .kext files) Any ideas out there or should I just go for a replacement iMac?
View 14 Replies
View Related
Oct 8, 2008
All of the permissions are setup as they were on my local computer. I need to reset the permissions so the server can manage them correctly. I have tried to do this via "get info" on the containing folder, via the server tools and via disk utility, but I have still not managed to correct the problem.
View 3 Replies
View Related
Jun 17, 2012
I am installing osTicket on my Mac Mini Server running 10.6.8.
I need to enable short_open_tag. I believe I need to make a change to the php.ini file.
I have tried to open it through terminal through the following comands: cd /etcsudo nano php.ini
got the error message Error opening terminal: xterm-256color.
so then I tried cd /etcsudo pico php.ini and got the same error message.
My Question is, to enable short_open_tag, do I need to edit the php.ini file or not. If I do, how? If not, how to I enable short_open_tag?
Info:
Mac mini, Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 4, 2010
I've recently bought a Mac Mini to use as a network file & print server for my home network. Up until that time, I used an AirPort Extreme for that purpose, but ran into some issues with using multiple external drives connected via a hub to the AirPort Extreme's USB port.
View 1 Replies
View Related
Dec 31, 2008
I recently started working for a web design company, we use a Mac G5 Tower with Leopard Server installed. What I need to do is, if at all possible, disable file permissions so that anyone on the network can make changes to a file without having to change the permissions first. Right now, after a file is created the permissions have to be changed to allow everyone else to make changes if needed. Is there a way to disable file permissions in order to avoid this problem altogether? I personally run Linux, as such I am not a Mac guru so any help will most likely need to be in basic terms so I don't get lost.
View 7 Replies
View Related
May 9, 2012
I'm unable to upgrade from my 10.6.8 configuration on my Mac Pro running OS X Server to OS X Lion Server. I've purchased both Lion and Lion Server, but each time I attempt to run the updates to 10.7+ I get error messages saying to install 10.7 or to download Lion Server - though when I do that it tells me that I need to install 10.7.How to migrate to Lion Server.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Jun 20, 2012
I've SL 10.6 server with FTP service Everytime anyone creates new file or folder it gets new permissions!
How to get parent folder or file permissions for every new file or folder, without propagate permissions everytime manualy.
View 3 Replies
View Related
Mar 21, 2012
I'm not sure - but for some reason I am no longer able to login to my wikiserver via Safari. I can with firefox, chrome, IE, etc but not in Safari. Username doesn't matter. (either total admin or just a user).
Details:
Mac OS X Server 10.6.8
View 2 Replies
View Related
Jun 8, 2012
When I send an email from Mail ( Lion OS Mail) I am unable to store the sent message on the Yahoo server. I have set up my Yahoo email account as a POP account & I do not see the option of “ Store sent message on the server” as in iCloud email.The iCloud email is set up as IMAP.
View 1 Replies
View Related
May 3, 2012
I have a group of designers that are connected to X Server running Snow Leopard. I have placed them in a group, "MarComm" I have granted everyone full read/write access. ( I can trust them all) I have tried to propagate these permissions..I saved the changes and restarted server. For some reason there are 2 sets of permissions.
1) full access (desired configuration)
2) "custom" access
This "custom" access does erratic things..for ex:
Allows the designer to pull off a job folder containing 12 items. He has permission to use 8 items, but not the remaining 4.
Perhaps I need a step by step tutorial on how to create a proper "group" and to propagate permissions. I understand that the ACL should take precedence over the POSIX. I am not well-versed in using the terminal, but I am a careful person, and willing to try it.
Info:
Xserve, Mac OS X (10.6.8)
View 1 Replies
View Related
Apr 14, 2012
Hi. I've enabled web, wiki and opendirectory in lion server, but I can't enable users to change their passwords, because the option to modify my default web site in the Web pane in server admin is greyed out.'ve read the documentation, but I'm stuck at this point.
View 4 Replies
View Related
May 3, 2012
I've got a lion 10.7.3 server and several Lion client boxes all attached via ethernet to an airport extreme.
I've got a bona fide certificate that seems to have installed correctly, and the client is talking to the open directory server
Without fail, I get a message "unable to log in the user at this time" on each of the clients...
UNLESS I open up all ports on my airport extreme to the server.
I've tried opening individual ports for AFP, profile manager (1640, 2195), open ldap (389, 636) and even kerberos (88). Even with all of these open, it still doesn't work. I have to open up everything to get the error to go away - then the users can log in just fine.
Note, I'm logging in from the local network to a server on the local network, so this just seems bizarre.
I don't have the logs on this computer, but I recall that the error was occurring when it tried to mount the home directory, after authentication. It was an error 64 from homedirmounter (if memory serves).
View 5 Replies
View Related
May 30, 2012
I have a Mac Mini running Lion Server. We are going to use it for software update, profile manage , vpn, ect. When I'm not on the LAN I can load the [url]... however when I'm on our LAN I'm unable to load this site. I can start load the site from the LAN by putting,[url]..., but the page then redirects to [url]...auth?redirect=[url]... and will not load because of the domain name. This problem is also causing me to not be able to push profiles to machines while they are conected to the LAN.
My goal is to be able to load the site from anywhere as [url]...
Info:Mac mini, Mac OS X (10.7.4)
View 2 Replies
View Related
Jun 26, 2012
I am trying to setup a Mac Pro with Lion Server that will allow us to access our videos and images via the local network.
I have created a group and populated it with the names/accounts of those that will be using the server.
I have added both installed drives as share points, the smaller one is the system/boot drive and the larger one contains the video and images (both drives are internally-mounted). I've also enabled the group's permission to read/write.
We are able to login to the server via afp but we only see our individual home directories on the system/boot drive.
View 1 Replies
View Related
May 19, 2012
we had an older xserve die on us recently, a g5 system running 10.5. we were able to recover most of the file content we needed off of the server, but not all of it (yet), and not any of the system files itself (the main drive was toast) the problem im having is this... we've been migrating this content over to a newer server running 10.6.8 server. Several of the files we need to get at and modify however were locked via the finder right before the original server went down (we do this to prevent others from editing a live file on the server). now, because the user data for these files was lost (terminal & finder show them as being owned by "unknown") we cannot change ownership of the files to unlock them.so basically, its a permissions loop that we cannot escape from: terminal will not let us chown or chmod the file, because its owner is unknown because the file is locked via finder, it will not let us change the owner.
View 6 Replies
View Related
Dec 29, 2008
So on my boot drive, there is no option to uncheck the Ignore ownership on this volume because, well, it's not there. I'm running the latest version of OS X. How do I fix this? I've searched around and found similar threads dating back to the Tiger days but nothing that fixed anything for me.
View 6 Replies
View Related
