Mac OS X Lion Server :: Cannot Edit Website Details - Domain Name Field Blank
Mar 23, 2012
I'm trying to setup a Lion Server as an internet server - not as a web server - I need access to a different port. When I use the Server UI to go to Web, I can select to edit my domain name but then in the edit window, the Domain Name field is blank, and I can't change anything such as the port, SSL Cert, etc. As best I can tell, I have the DNS setup but I'm not sure I've done it correctly. I can add a second domain name and can edit the details for that. I'd hoped I could delete the first one or swap them but no luck. I can't access the domain name from outside the LAN but it may have just not propagated yet. I can access the IP address and do see the default home page.
I've just set up DNS on Lion Server and whereas previously I could connect to a system on my network by the hostname (e.g. via ssh), using the Lion Server DNS requires the fully-qualified name. Is this by design? I've checked all my settings and it all seems to be correct. Â
I have not set up ssl before so i have a very basic question. I would like to support my Mac Lion server based email with a basic SSL cert that was provided with my domain name.Â
When setting up the certificate would i set the dNSName to  domainname.com or to server.domainname.comÂ
My mail server host name is set to server.domainname.com so i would assume this is the correct one, but emails are addressed to name@domainname.com so
I want to be sure i am setting this correctly before i generate the csr
Here again dealing with how OS X deals with .local domains I think.Was previously bound and all was working fine. Have just updated to 10.7.4 When trying to login using the "Other User" the button stays red and says Network accounts unavailable. I can ping domain server by name and IP.Permissions have been rebuilt.
Have rebound. Had a problem at first unbinding inside the Open Directory Utility as it said it could not connect with the domain and an unused account would be left if a forced unbind was done. Tried again by using the minus button instead of the Unbind button and it worked without any message.
So then binded to the domain and all looked good. Green button next to Network Account Server in the Users and Groups.
Info:iMac (27-inch Mid 2011), Mac OS X (10.7.3), VM Ware with XP Pro
Normally, you can create a DNS record that points to the zone itself, e.g.:Â
@Â Â 10800 IN AÂ Â Â 196.197.200.201Â
How do you accomplish that on a Mac OSX Lion Server? The DNS requires you to enter a hostname and it does not accept "@" as the hostname as it normally appears in the zone file. (manually modifying the host file does not work - I tried that ;-) )Â
I have been unable to find any references on how to best automate certain "tasks" in Lion so that I can do the following:Â
create predefined DNS names based upon the clients domain name create predefnined web address based upon the just created DNSÂ
For example.... We have the customer "Sammy's Flower Garden" and his domain is "sammysflowergarden.com". At the command line, I would type:
$ clientsetup sammysflowergarden.com This would then create a base folder structure (this part has already been written)ClientDomains    -    S         -    sammysflowergarden.com              -    production              -    staging              -    archive              -    design                   -    template    Â
[code]....
From what I have read, alot of modifications outside of the Lion serveradmin tooling can result in some rather unusual if not nasty behaviour. If this is true, then I would assume that I could not just write out to a file in /var/named/ and have it automaticly picked up by the server? The same for the apache instance? I still want to be able to use the GUI interface when needed. Â
I have MAC OS X 10.7.3 After joined to Windows Domain 2008 R2 and reboot system - i have not items, where is i must enter domain credentials.But, if i login as local user, and logoff - i have item for entering domain credentials.Why this item not show me after restart? How i can fixed it?
i've setted up my mini server as "server.domain.private"because i don't want it to be published on the internet by default, i want to have control on wich webapp is published.my main goal is to have a new Vhosts wich is serving only the webapps i need to be running and ,why not, hosting multiple VhostS enabling just some (or one) webapps each [url]). in other words: i want control on what is published where and how in order to publish Profile Manager i did: - created a new virtual host on the web service called "server.public-domain.com"- enabled the webapp on that Vhost from terminal as found in: [url] using this command "webappctl start [url]"- restarted the whole server but this seems not to work as expected.. should it ??? after some dirty work on the apache config (copy/paste from the original vHost of some "proxypass" and "balancemembers" and "include" regarding devicemngmt) i got it to ask me for password when browsed from the outside world, BUT after login it will redirect my browser to "server.domain.private" wich is obviously not working from outside.Â
Info: Lion Server, Mac OS X (10.7.3), profile manager / ical server / ios
I am needing a playlist to populate, given that the comments field is blank and Im struggling to work out how to do it? Ive been making smart playlists to meet different criterias for a while now but this one im struggling on!
In Time Machine under the Oldest and Latest Backup fields all it says is "--".
It used to work perfectly fine but today i noticed it was blank, when i go into time machine all the dates are there including the one it done today, just seems to be a display error, Any ideas how to fix this?
I'm trying to setup mail on Lion Sever (7.3). The only way I can get it to accept incoming mail is to specify the whole FQDN of the server in the address. For example the domain name is example.com and I have a user set up called john. Sending mail to john@server.example.com works.
But sending mail to john@example.com (which is what I want) returns an error: 554 554 5.7.1 <john@example.com>: Relay access denied (state 13).
For internal DNS, I have: example.com - primary zonemail.expample.com - alias server.example.comserver.example.com - 192.168.1.2 [URL] - alias server.example.com MX record [URL]
I see references here to problems in mail on 7.3 but not this specific problem.
I'm trying to edit permissions on a folder via the Server App, and having some trouble. I can access all of the other folders on the shared volume and edit them just fine, but on one folder the OK button is always grayed out. Here's what I'm doing:Â In Server App, selecting the server under StorageChoosing the drive I want to editSelecting the folder I wantUnder the gear, choosing Edit Permissions.It shows me the list of users just fine and I can see that there's a problem, but no matter what changes I make it won't let me click OK. It also won't let me click + to add a new user.This works fine on all of the other folders on this same drive. Should I just reset all of the ACLs for that folder in the Terminal and try again?
Just upgraded a Snow Leopard Server to Lion Server 10.7.3 and the Web Service works along with all of my virtual hosts BUT the default site that shows isn't the one that Server.app says should show, its the first virtual host that shows.
I've tried adding "ServerName myserver.mydomain.com" params into the 0000_any_80_.conf which hasn't worked. Anyone know a workaround for this? Can't use the Wiki or Webmail without it.
I would like to move my service data to the newly acquired Promise Pegasus. Server.app -> Server Name: Settings: "Edit" button next to "Service Data" is greyed out.
Info: Mac OS X (10.7.4), 8GB, 2,93 GHz Intel Core 2 Duo
Is there anyway to change the listening port for the default website without messing up the server app?? I have a program that need to run on port 80 for ease of use, however lion listens on all ports because of the default website. Â
I have a Mac Mini running Lion Server. We are going to use it for software update, profile manage , vpn, ect. When I'm not on the LAN I can load the [url]... however when I'm on our LAN I'm unable to load this site. I can start load the site from the LAN by putting,[url]..., but the page then redirects to [url]...auth?redirect=[url]... and will not load because of the domain name. This problem is also causing me to not be able to push profiles to machines while they are conected to the LAN.
My goal is to be able to load the site from anywhere as [url]...
I wrote an email to the tech people on my domain service provider, Network Solutions, because I've yet to see my website load properly. I was directed to use web forwarding, and I set that up over the weekend. However, though I am hosted through MobileMe, my personal domain link takes me to a blank page. There had been an under construction page. if I am using web forwarding, should I remove the personal domain from my Mobile Me preferences? Could that be the reason it won't work?
on setting up an OD master to accept kerberos from a AD domain and I can't get AFP to work.
What I've done:
1. Bind OD Master to AD 2. Destroyed the OD Kerberos realm 3. Ran sudo dsconfigad -enableSSO
When I log into a client that is bond to both AD and OD and try to access a SMB share on the AD side it works. When I try to access a SMB share on the OD master it work. When I try to access a AFP share on the OD Master it fails with the error " The user Authentication Method required by this server can't be found". Now I think this error is because I'm forcing Kerberos authentication, if I change AFP setting to any method authentication I get promoted with the AFP login window, I enter my AD account information and I'm able to mount the share.
I'm running server 10.4.8, how do I authenticate NT domain users on this? I tried to set the server to be a Backup Domain Controller, but then it wants Open Directory to be in replica mode. The problem there is that it needs an Open Directory server to replicate.
When editing a photo, adjusting things in the Adjust pane sometimes makes the picture disappear and I have to click Done to go back to the main window to see anything. Anyone else had this problem and has anyone found a way to solve it? I'm running latest iPhoto and SL. I've trashed Prefs, of course.
I have just done a little design on iweb 09 on my new imac 27" and have uploaded it to my hosting. Its succesfully uploaded but the problem is thisIf my web address was say www.macs4u.co.uk the website. When i type that in now it goes to www.macs4u.co.uk/www.macs4u.co.uk/welcome.html and shows that site i just uploadedWhy cant i just have it uploaded to my server so when i type in www.macs4u.co.uk it stays as that and show the website??
I've registered a domain and it works wine when anyone enters www.mydomain.com. However when I type the domain name without 'www', I get the following:Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time. For assistance, contact the IS Support Center. Â
Info:  iMac G5 PPC,  Mini Server,  MBP  TV, Mac OS X (10.6.4), iPad2, iPhone, AppleTV
If you have a contact in Addressbook (AB) with a nickname, if you also use Apple Mail (AM) and create a new email and start to type the contact's email in the TO field, AM will finish your typing giving you a list of related possible email addresses to choose from. The problem is that in addition to the email addressk AM adds the contact's nickname as opposed to it's firstname/lastname or even business name. We need a preference for this, per contact.Â
Example:Â In AB you have a contact:Â
Name: Jon Doe Company Doe Company Nickname: The Doester email: jon.doe@doecompany.comÂ
In AM you start to write an email:Â and type: "jon" and AM shows you a list of possible related emails one of which will be:Â "The Doester" [URL]Commentary: now if a casual email to a friend, this is OK. But what if this is a business oriented email and "The Doester" isn't appropriate? You can only stop the inclusion of "The Doester" by deleting it from the Nickname field in the AB. This is presumptuous on Apple's part, or a bug, that the Nickname should trump the first/lastname or company name.Â
I don't exactly know the answser to this. If we could easily choose which name to append in front of the email address (firstname/lastname, company name or nickname) that would be cool. Or maybe no name gets added if it has to be: all or nothing from a programming point of view. But having nickname as the primary, if it exists, can be a problem in certain correspondence IMHO.Â
Info: Mac Pro 3.0 GHz Quad-Core, iPad WiFi/3G, iPhone4, Mac OS X (10.6.8), 30" HP Display, 22" Cinema Display
I recently purchased a new MacBook pro with Mac OS X, I updated the OS to the latest release which is 10.7.3. I need to join (bind) a MS Windows server 2008 Domain, but when I try to bind I get below error:
Unable to add server.
The daemon encountered an error processing request (10002)
I searched the internet for a solution; most suggestions refer to sync the clock with the domain clock as Kerberos protocol is unable to authenticate. I cannot find a option to sync the clock with the domain clock, how I do that?
When I access a certain website (eyetube.net), the website loads and displays for about 5 seconds and then the screen goes blank. All software has been updated and Java latest version has been updated.
I looked for a introduction forum but couldn't see one so hello guys and gals. Great forum you've got here..Right my issue is as follows.I have a new iMac Pro on snow leopard 10.6.4 and it is linked to a Windows SBS server 2007 but i don't think i've done it properly.When i switch the machine on all i get on boot up is 1 local user Sometimes i can leave it and it will offer me the 'Other' option which i can then login to the server But most times it doesn't to that... I have to logon as that local user and then unbind the windows domain and rebind it then when i logoff it shows me the 'Other' user Also another thing thats annoying is it doesn't map anything automatically i have had to create a alias icon on my desktop to go to my server space and it can take up to a minute to connect to the server..
we have a mac server running and have a windows based (XP) machine logging on to the domain. is there a way to enable offline files on the mac server so that a copy is saved on the windows machine and when the user relogs on to the domain the files get syncd?
I am new to the mac (OS10.7.4) having recently transitioned from Windows (and go way back to CPM - for those that remember). I am trying to achieve through finder what I can do in windows explorer by selecting multiple files, selecting properties and then selecting (and then modifying) details. I tried the similar thing on Finder using Get Info instead of Properties but only ended up with multiple windows, one for each file selected (and had to close each one individually! ).
Tried 'option-command-I' on multiple selected files, it worked, but the common tags that I wanted to alter where not available for editing. I can simply achieve the outcome I want by cutting and pasting the files to a usb stick, making the modifications on the windows machine and pasting them back on the mac. This should be a simple basic operating system function regardless of platform - how to find/achieve it!
