I want to connect my 2009 iMac, Mac os x version 10.5.8 to my 2008 Samsung LCD TV, model LN32A450C1D. Does anyone know what cords I will need so I can watch videos from my computer on my TV?
Info:
iMac, Mac OS X (10.5.8)
i am trying to connect my Mac Mini to my 860 Samsung Series 8 HDTV. I am using a DVI to HDMI connector into the DVI port on the back of the Mac Mini. I have plugged the HDMI cable into the back to the Samsung in the HDMI/DVI port. When i which the source to the correct HDMI input i either get a message saying "no signal" or, sometimes briefly, "mode not support"
View 2 Replies View Relatedhere is my set up:
macbook pro/imac
apple wireless router
ps3
samsung bdp 3600
all connect to the internet wirelessly accept the samsung. it came with a wireless dongle, it can see my network but will not connect when i type in password it does not connect.
I have and issue, i bought a samsung clp-315w and after allot of doing finally got it to connect to my network and I was even able to add it as a bonjour printer. So at this point I thought that I had made it, I was wrong. Now when I send a document to the printer it sends it and then say connecting to printer and at this point it is not able to connect and then says it will try to connect to the printer again in 30 seconds but never does.
View 1 Replies View RelatedI am using a rocketfish thunderbolt to HDMI dongle, HDMI cable to the TV. The TV seems to recognize that something is connected, but the message on the screen still says no signal. I've tried the various HDMI inputs as well as the HDMI/DVI input. I use the same HDMI cable to connect to the iPad to the tv without problems.Â
My Macbook shows "Samsung" under displays, so the machine is connecting to the tv. Could this be a firmware issue on my TV? The TV is approx 3 years old. This is part of the reason I bought this machine
Info:
MacBook Pro, Mac OS X (10.7.3)
I want to hook up my MacPro TOWER to a Samsung,LNT4671F, 46 inch HD 120 Hz tv.
View 1 Replies View RelatedI was able to print out a Network Configuration Report which indicates an IP Address, MAC Address, Subnet Mask, etc. It even says that the thing is connected to a network called "airportthru" but I have no idea what that is either... I'm an absolute networking zero for the record.
I can't access the SyncThru Web Service (as noted in the instructions) because when I put the IP address into my browser - both Safari and Firefox - I get an error (can't open the page because the server can't be found).
I'm looking to purchase an external monitor for my MacBook Pro. I'm thinking of the Samsung SyncMaster 2233sw. It says I need a DVI 24 Pin cable to connect it to my MacBook Pro. Which one of these Cables do I need?
View 4 Replies View RelatedHow do I connect my macbook pro to my samsung smart tv its the D7000 and has all share?
Info:
MacBook
Pro, Mac OS X (10.7.3)
I bought a Powermac G5 (april,2005) and a Samsung syncmaster S22A300B screen. When i connect the mac to the screen with a VGA cable all i get is a black screen, but somehow it recognizes that it is connected. When I connect the mac to the TV everything works just fine. what i can do?Â
Info:
PowerMac, Mac OS X (10.4.11)
I'm trying to connect my MacBook to an external 19" Samsung LCD monitor. I connect using a standard Apple mini-DVI to male DVI adaptor, which in turn is connected to a third party female DVI to female VGA adaptor, which in turn is connected to a VGA cord which connects to the monitor (male on both sides).
My monitor shows up in the System Preferences display settings, where I can control everything properly, but the screen is black. I can move my cursor over to the other screen, so it seems the MacBook can recognize the monitor. The monitor connects fine using the VGA cord to a Thinkpad.
Is there any inherent with this connection configuration?
I used to have a mac Mini that connected so effortlessly to the monitor and allowed the full resolution (1920x1080). But I'm trying to do that with my MacBook (as I recently sold my Mini) and I'm unable to get it to do what I want to. I have Snow Leopard. It would not allow me to do anything until I updated the OS. The monitor was not recognized at all. Except I noticed when I plugged it in, the macbook screen would flash...so I figure it's recognizing something. But in display settings, detect display wouldn't show anything, neither would restarting. That is, until I updated Snow Leopard.... Anyone know why this might be? And now that I've been able to get something on the display, I'm still not at all satisfied. The resolution is terrible. It will not allow me to choose anything other than the resolution on my macbook screen, but over 23" it just looks terrible. Not only that, but the Macbook screen stays on. I want the mb screen to go off, and full resolution be on the external monitor. I can choose another option for an extended desktop but that's just ridiculous. I have no desire for anything like that.
View 5 Replies View RelatedI Late 2008 Macbook Pro. My needs have shifted lately, as I am now using it mostly with an external display. I ran it into my 23(?) LG 1080 LED monitor with no problem. I recently bought a Samsung 27' Syncmaster SA550 monitor. I am in love with it, however I cannot find a display size that fits the monitor. I am currently running the 1080p resolution setting on my computer but it is easily 2-3 inches too small. And with overscan its too big to see my menu bar and dock at all. Running at a 24-25' screen size is still much better than my 15 inch macbook pro screen, but it would be awesome to use all of the 27 inches of this monitor. I have been unable to find a working setting, if there is a trick, or a way to setup a custom size As well I am running this as the sole display (not dual screens)
Info:
MacBook
Pro, iOS 5.1, External Display: Samsung SA550
Can I connect my 15' macbook pro to samsung 214T monitor? What cables do I require? I only recently switched to mac and previously worked on a PC for photo editing using a samsung 214T monitor Rather than buying a new monitor I would rather use the 214T as I really like it and it is accurate. Plus I prefer the matte finish.
View 1 Replies View RelatedI have a macbook and a Samsung 1080p flat screen I would like to connect both Video/Sound too.I purchased Apples VGA cable along with a HDMI cable. The video output works great, no complaints with the video. The issue that I have ran into is sound, I would like to watch videos or listen to music on my Samsung. So here's where I am at currently. I purchased a Griffin Auxiliary cable w/male connectors. I plugged the cable into the both macbook auxiliary ports (1 at a time) and the Samsung auxiliary port. I was never able to get any sound out of the TV.
Can this be done with the hardware I currently have? If not, what would I need to fix or purchase that would fix the sound issue?
Just bought a Samsung Galaxy S3 but am truly unable to get my iMac to 'see' the phone when connected via USB.
I'd really like to sync itunes to the phone. I've tried using the app Easy Phone Sync but no joy with that either.Â
Info:
iMac
How do I transfer my contacts from my Samsung Mesmerize to my new iMAC?
Info:
iMac, Mac OS X (10.7.3), sync with android phone
How do I sync my Samsung Galaxy Phone to my IMac?
Info:
iMac, Mac OS X (10.7.3)
I recently bought an external 1TB Samsung usb disk for my Imac.I cant get the disk to partition or format correctly.Disk utility just keeps hanging waiting for the disk to reappear!
Info:
iMac, Mac OS X (10.6.8)
My Samsung CLP310N has worked fine. I don't know if there was a software update (?) but it has stopped working. My Mac won't see it at all. I have downloaded new printer drivers from the Samsung site.I have downloaded Apple software update. Nothing I am trying works?
Info:
iMac, Mac OS X (10.7.2)
I got a Samsung F3,1TB installed and partitioned it via firewire to Guid Partition. One the original install CD 1 is inserted the Apple logo shows up for a second, disapears and a folder with a question-mark appears.
Info:
iMac, Mac OS X (10.5.2)
I have downloaded samsung kies, supportprogram for the transfer, but I cannot make it work. Nothing is happening.
View 1 Replies View RelatedI'd like to view online content on my Samsung 7000 series LED. I don't mean streaming saved content, rather using my TV like a wireless monitor. My iMac is connected wirelessly, and the TV is wired to my router. Is it just a matter of getting something like a D-Link Boxee Box or Slingbox?
Info:
iMac, Mac OS X (10.6.6), iPhone 4S
I have the new iMac 21.5 Inch with a Thunder Port connector that looks like a mini display port. I have the adapter from Apple that includes the mini display port and converts that to a HDMI Cable to my Samsung Synch Master P2530. The monitor cannot be recognized my the iMac. This monitor worked with my older iMac and it's large display port which adapted to HDMI.
Info:
IMac, Mac OS X (10.6.3)
Unable to connect to the database:Could not connect to MySQL I just started to receive this message, when I try to go to this one website. What caused this? and how can I fix this problem? I an geet to website using other browsers.
Info:
iMac, Mac OS X (10.0.x)
Is backup Samsung 3.0 Story Station 2TB HX-DT020EB/B62 user friendly with iMac Leopard and Lion?
View 4 Replies View RelatedI have a 2007 20 inch Intel core 2 duo iMac and an LG 46" LCD tv. I bought an HDMI cable and a Mini DVI to HDMI adapter but cannot get them to work together. Nothing happens when I click on detect displays in the system preferences.Â
Do I possibly have the wrong version on Mini DVI, for instance DVI-D instead of DVI-I?
Info:
iMac, Mac OS X (10.6.8)
How do I connect my Mac to my PS3? I want to stream movies from my Mac to my PS3.
View 3 Replies View Relatedimac can't connect to internet
View 4 Replies View RelatedSo I've got an odd problem, here's the scenario: 27" iMac 2.8GHz Quad Core running OS X 10.7.1, and a netgear router (connected to a Comcast modem).It sees the network, connects then drops the network. However, a MacBook Air running 10.6.8, an iPad, and a Sony Viao running Windows 7 can connect and stay connected to the network fine.This made me think that something with the iMac's WiFi card is broken so we brought it to work and connected it to our network (802.11x, WPA2 Enterprise, Cisco routers) and it worked perfectly. He brought it back home, still couldn't connect to his network.We brought it to the campus Apple store and they replaced the airport card and it seemed to resolve the problem for a bit, but now the issue has come back.Yesterday we did a full time machine back up, wiped the hard drive and did a full OS X Lion re-install and restored from the Time Machine back up, ran all of the Apple software updates and it connected to the WiFi here at work fine.Brought it home, still won't connect to his network. This would make me think that it's an issue with his home network but all the other devices are working fine.We had a Comcast technician look at the network and they found nothing wrong.
Info:
iMac, Mac OS X (10.7.1)
