Intel Mac :: Computer On Startup Is Stuck On Blank Grey Screen?
Mar 4, 2012My iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 RepliesMy iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 RepliesComputer begins start up, but screen is blue and white instead of usual backround. Get spinning mouse icon for awhile, then it stops.Â
Info:
iMac, iOS 4.3, fan runs a lot
Ever since I downloaded 10.7.4, a blank grey screen appears at startup. If I click on the mouse, a white square cursor appears which I can drag around and `uncover` a place to input password. Then the galaxy image appears, and I have to input password again.
Info:imac, Mac OS X (10.5.1)
At start up, my computer shows grey apple screen and then goes blank. Why?
Info:
MacBook Pro, iOS 8.1.2
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state. Â
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail. Â
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen. Â
Info:
MacBook, Mac OS X (10.7.3)
everytime I try to boot my iMac it gets stuck at the first grey screen. No logo, no loader, nothing but a grey screen. I have tried everything here > http://support.apple.com/kb/TS2570 > with no results. The grey screen remains there, with no changes. The only thing that seems to work, but only for a seconds, is holding the option (alt) key at startup. After a few seconds, the pointer of the mouse appears.
Info:
iMac, Mac OS X (10.6.8)
Turn on Mac goes to grey apple screen cog wheels spins but its stuck there tried control option p and r doesn't do anything tried turning it on while holding shift key to try and get it in safe mode but that does not work either.
Info:
iMac, Mac OS X (10.4.11)
I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel. I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel. What should I do next, or what am I doing wrong?Â
Vetaut
Info:
iMac
I have a mid-2007 model and I replaced the x2 stock 1GB sticks with x2 2GB sticks. I followed the correct procedures, (I think), and when I powered it on the fan came back on but the screen was black. I unplugged the unit and replaced put the old RAM back in and now when I power it up the screen just goes grey and beeps when I turn it on.
Info:
Mac OS X (10.6.8)
I just installed OS X 10.6 and now when i try to turn on my computer, i get this grey screen with computer code on it and the black box that says to restart my computer. I tried safe boot along with all the other steps on the page for the grey screen but nothing works.
Info:
iMac, Mac OS X (10.6)
My mac has crashed many times so I turn it off and on, but not it wouldn't start up.. just spinning away..
Info:
iMac, Mac OS X (10.7.4)
I Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
I get the apple logo then the spinning gear then just a grey screen.
Info:
iPad 2
MacPro late 2008 running 10.5.8;during startup I hear the tone and the apple appears on screen and the little spinning symbol appears...a few seconds later a grey screen decends and a message appears;"You need to restart your computer" ...so I do and the process is repeated... and repeated. Tried checking the battery/full and seems to OK .....
View 6 Replies View RelatedI have a Mac Pro that is stuck at the grey startup screen. Grey apple, spinning wheel. I let it spin for about half an hour and then went on to try other things. Every attempt still leaves me stuck at the spinning grey wheel.
Info:various, Mac OS X (10.5.6)
What o I do I have done command, option, p, r at start up etc. I will not go to the desktop.
Info:
iMac
After restarting when the computer powered up it goes to a grey screen and stays there and beeps 3 times continuosly. Do I need to take it for repairs?
View 2 Replies View RelatedI have a 4 month old mac desktop that is stuck on a white screen.I already unplugged etc. and it does nothing. What do I do?
Info:
iMac
So my quicksilver has been working great up until this afternoon. i had to restart and now whenever i turn it on all i get is a blank grey screen and nothing else. i dont hear a startup chime or anything.
View 8 Replies View RelatedMy Macbook will not boot up. I am now faced with a plain grey screen with no apple logo, chime sound or activity wheel appearing.
Like most Macbook users I know, I rarely go through the booting up process from day to day use unless the System Updater requires a restart, but this time there was a different reason for me restarting the system.
When I was expanding an archive with Stuffit Expander, the app froze up. I went and deleted the archive file knowing that it was corrupt, but I did this too soon before the app had a chance to close down properly. It became stuck as a process that couldn't be closed down. Its dock icon didn't have a 'Force Quit' menu option so, I chose to perform a restart.
The Macbook went through the startup process but took a very long time. (I guess after reading around the forums this was fsck attempting to scan and repair the potentially damaged hard drive). I mistakenly performed a hard reboot thinking the system had hung.
The second time, it displayed the apple logo and wheel for about 2 minutes before showing a circle with a line through it and no further activity. When I rebooted again the apple logo and wheel were displayed with the hard drive activity audibly in a repetitive on and off state. I left this for about 15 minutes before deciding to turn it off. At the present moment it starts up to a plain grey screen as mentioned at the beginning. I tried experimenting with removing the extra 2gb memory module but there was no difference with or without it. I tried resting the NVRAM with Option-Command-P-R but all I got back was the startup chime (i.e. the muted volume I had it at has now reset to the default level).
When Option is held down on booting, the mouse cursor is visible over the same blank grey screen. No volumes show up. I have selected the Finder Preferences option to hide all volumes from showing up on the desktop, but I doubt this would affect volumes from showing up on the boot up screen.
I have tried booting from the 10.4 CD that came with the Macbook and the 10.5 (retail) DVD. The 'C' or 'D' keys do not have any effect either.
I think my options now are either to try and obtain a firmware reset CD which might make it possible to recognise volumes again, or there's the possibility that I'll have to get a new hard drive. Can you suggest anything else I might be able to try?
On the subject of hard drives, if it turns out that the Macbook's hard drive is beyond repair and I need a new drive I only have a caddy for 3.5" PATA drives which I use for Time Machine. With an appropriate 2.5" SATA caddy is there any way I could access the filesystem in Windows? How else could I format the drive to the correct FS?
Updated airport utility and macbook got stuck on progress bar. I restarted and it is now stuck at bootup screen.Â
View 3 Replies View RelatedI just had a software update on my Mac Book pro, and now it is stuck on the grey screen.
Info:MacBookPro, Mac OS X (10.6.8)
We have 3 users set up on the computer (iMac, Snow Leopard). This just started recently. I can't think of any changes I made to make this happen.
Info:
IMAC, Mac OS X (10.5.1)
My 24" iMac has crashed and has a CD stuck in the drive. The Mac continuously reboots but never makes it beyond a blank grey screen. I do have my OS CD and I have an external time machine backup, but I can't get to a terminal prompt to do anything. I've tried all the usual suspects for getting the CD out - and there is only one CD in the drive.
I've tried holding the mouse button down, pressing the eject button on the keyboard (I tried pressing eject on both a wireless and a wired keyboard). I also tried holding command-S to boot into single-user mode which didn't work. There is no pinhole on the CD to physically eject the CD and I understand that there's no way to boot from the Time Machine. I believe that not being able to remove the CD is hindering my ability to restore and boot into single-user mode.
I am currently stuck on the grey screen of death with the flashing ? file folder.I have tried resetting the pram etc. and when i boot from my snow leopard disk the disk utility does not recognize my HD. Is there anything else I can do to fix this? Or try?
View 2 Replies View RelatedMy iMac ran a software update last night, but the program kicked out before it completed. When I went to reboot this morning, I had the Mac icon on a grey screen, with a little line rolling around in a circle below it. It's been hung up there all day.
I've read in other posts that I should do a clean install of the system software. Problem is, my hard drive is absolutely packed and the computer is telling me that I don't have enough space to do even a baisc installation without all the bells and whistles. Because the machine won't boot, I can't get into the drive to transfer or delete any files in order to create the necessary space for the installation.
My Mac Pro started having issues about 2 weeks ago. The screen would go blue every now and again for about 3 seconds and then go back to normal. It kept doing this off and on.
Two days ago the Mac Pro started making a buzzing/humming sound, loud enough to hear in the other room.
I shut it down and tried to fire it back up and it began making a clicking noise, then the humming came back. The screen froze at the grey screen and did not show the white loading wheel.
I've swapped out the drives and still the same.
The Mac is about 2.5 yrs old and I use it for video editing (FCP) and photo editing (Adobe CS3). I've never had any issues until now.
About two weeks ago I'm using my snow leopard partition of my macbook pro and browsing the internet via firefox. My mouse freezes for a second, and then my computer just shuts down. I power back up my macbook pro to find a 'cancel or prohibitory symbol'. Strange thing is I can hold down option and boot into my windows partition no problem I go through all the motions suggested by the apple website, such as resetting the PRAM etc.. Nothing works. Flash forward to today. I finally get a hold of my snow leopard installation disc and boot my macbook with it. I run the disk utility and it finds that my hard drive's good to go.
I read online and it seems that the best option would be to install snow leopard again. I decide install it again, but about halfway through the installation, the installation fails and pretty much freezes. I had to shut down the macbook via the power button. Now, whenever I try to boot up my macbook I hear the chime, but nothing happens after that. I am just left with a grey screen. I cannot enter safe mode, single user mode, and when I try to choose the start up disk by holding down option, the arrow pops up to choose which disk to pick, but there are no disks to choose from.
I am trying to reformat my Macbook pro. I run the reinstall disc. When I type in my user name and password then click restart, the system reboots but get stuck on a grey screen. You hear the cd spinning for a minute or so but then it goes off. Do I have a bad disk(doesn't appear to be scratched anywhere) or am I not being patience enough.
Info:
MacBook Pro, Mac OS X (10.5.8)
Mac book is stuck on the grey screen with the apple logo and the spinning timer?
Info:
MacBook