I have a Mac Pro that is stuck at the grey startup screen. Grey apple, spinning wheel. I let it spin for about half an hour and then went on to try other things. Every attempt still leaves me stuck at the spinning grey wheel.
Info:various, Mac OS X (10.5.6)
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
Powerbook #1: Once in terminal I typed...
/sbin/fsck -fy
...response was...
disk0s10: I/O error.
Invalid Key Length
(4, 44890)
** Volume check failed
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5)
jnl: journal_open: Error replaying the journal!
hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state. Â
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail. Â
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen. Â
Info:
MacBook, Mac OS X (10.7.3)
So all of the sudden my mbp will not boot past the spinning wheel/apple screen. I have not let it try for longer than 15 minutes but I don't see the point. I tried to boot in safe mode(hold down shift) but the bar only went to about 1/3 and stopped/disappeared...so I don't know what to do. This shouldn't be happening after a couple months of light use.
Just for extra info:
I am able to boot into windows 7 via boot camp. Cannot boot from cd or go into safe mode.
I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel. I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel. What should I do next, or what am I doing wrong?Â
Vetaut
Info:
iMac
Greetings and saluations everyone. I've recently delved into the OSX world via secondhand eMac. The specs are eMac (2006 - not a typo... this is what it says)/1.42gHz/80GB HDD/1GB ram/etc. It came equipped with 10.4.6, did an update to the software and it brought the machine to 10.4.11.
After a week or so of tinkering, I think I have accidentally deleted some very necessary system files. Given that the computer did not come with any manuals or recovery discs, I've been doing some major digging over the last three days via internet and can not come up with a fix for my new love. I saw this post on MacRumors and it nearly is exactly what I'm experiencing: Mac chimes upon pressing of start button, goes to greyish screen with grey Apple logo and a spinning progress indicator then the computer goes silent (no HDD/CD activity)... yet keeps the active grey screen.
I've tried booting into safe mode but to no avail which leads me to think I've accidentally deleted some extremely necessary boot files. However, I do not remember emptying the trash during the last successful boot... is there a way from a command line prompt to "put the files back" to where they go?
I've downloaded several Mac OSX Leopard torrents but can't get them to boot off of USB drive, DVD RW external drive, external USB hard drive nor via OSX 9 CD ... Indeed, I am trying to burn from windows but have learned of several utilities which create ISOs in Mac Format and will decompress DMG files (ISOBuster & TransMac).
Please... will someone give me some good news? For example, telling me there is a way to boot from USB drive (and in what format the mac needs to boot - ISO? DMG? Expanded file system in appropriate directory folders? I don't care about wiping the hard drive... that's absolutely fine... I just need a working system again.
I recently went to turn on my laptop, and it started up, I heard the hard drive cycle, and it automatically went to a grey apple as the typical startup...but it froze there & a pinwheel was spinning...but it wouldn't boot up! What can I do to check this out?
Info:
MacBook
Pro, Mac OS X (10.7)
I Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
My mac has crashed many times so I turn it off and on, but not it wouldn't start up.. just spinning away..
Info:
iMac, Mac OS X (10.7.4)
My iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 Replies View RelatedGrey screen with apple and spinning progress then shuts off
View 1 Replies View RelatedI have an iBook G4 (Late 2004) that I just recently upgraded to Leopard using the 10.5.6 DVD included in the Mac Box Set. Whenever it boots, after the chime the screen stays black until the login screen. This happened occasionally with Tiger, but I found a post somewhere where someone suggested to hold the power button while powering on until you hear a beep. That solved it in Tiger, but I have not once seen a grey Apple screen in Leopard.
I forgot to mention that I have reset the PRAM and PMU.
I have an intel imac - can't tell you much about the details as I can't get any info out of it. I installed snow leopard about a year ago - no issue since then other than occassionally the screen goes black but nothing major.Yesterday, I backed up to my usual passport backup and then today, it froze. I couldn't turn it off or restart at all so resorted to the power button. Since then, I can turn it on, it goes to the grey screen (no blue screen) and I get the apple logo and the spinning clock/wheel. For hours and hours....So, I tried one of the apple support pages and worked through - peripherals, safe boot, NVRAM, PRAM, tried to reboot with mac osx disc (the original not snow leopard) - nothing. Absolutely nothing changes - same old grey screen, apple logo and spinning clock/wheel.
Info:iMac, Mac OS X (10.6)
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
Info:
MacBook (13-inch Early 2008)
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
Info:
MacBook Pro, iOS 5.1
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I have a 1.83 Ghz MBP with 512 mb of RAM (lame I know). The other day someone was using my computer to burn a CD on iTunes when all of my programs began failing. On instinct I rebooted my computer to solve the problem. Alas, now I cant boot past the grey apple screen, and the gear is spinning away. Saddest part of the story is that I had time set aside to back up my computer the day after this happened . Anyway what is the best thing to do from here? I haven't made any moves to fix it yet really, so what is the best thing that I can do to try and get my files back?
Information:
MacBook Pro
Mac OS X (10.4.10)
Grey Screen, Spinning Gear
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
This machine has been running fine. I installed ilife8 - had eyeTV running. It was slow, hanging, unhappy so I rebooted. It took a long time but eventually restarted - got the chime and after a few seconds the white screen/grey apple. No spinning wheel - no nothing. After a few minutes the CPU fans slowly go to full scream. Have to hold power switch to shut down. Won't go into single user mode, won't boot CD (can't even get the CD out of the machine, but the dvd never spins up). I've pulled all the memory except the original apple mem. I've tried my Kinston mem. There is nothing else in the machine that isn't pure apple.
Information:
G5 dual 2.5 up to date Tiger
Mac OS X (10.4.11)
I am having trouble with my macbook: It wont load past the Grey apple start up screen with the spining gears, iv done Zapp on the PRAM, iv run ""/sbin/fsck -fy"". And I am now starting in Verbose mode, but its taking AGES, it must be loading for an hour now, its showing "Neb-computer /System/library/coreservices/loginwindow.app/contenst/MacOS/loginwindow: Login window Application started (Over and over and over again). I don't have an install disk.
View 1 Replies View Relatedi need some help regarding my iMac. I was busy installing combo update 10.5.8 on my iMac when the power in the entire house went down due to the snow. When I started my iMac back up it got stuck on the apple logo with the spinning wheel below it. I can leave it there for as long as i like nothing happens. I had the idea to reboot using the CD's i got with the iMac but there is already a disc in the discloader so i can't put the reboot CD's in. anybody know how i can get my iMac to work again? There aren't any files on the computer that i neccesarely need but if i would be able to save my photo's etc. it would be great.
my 2006 macbook has not been able to start. First it didn't even have the chime, then I read through some threads in this forum and figured out that one of my RAMs was not properly put in. I fixed that, now I get the chime, the apple sign, and a spinning wheel and I am stuck there forever.
I tried:
resetting PRAM, didn't help.
start from safe boot, still stuck with apple sign and spinning wheel.
boot from installation CD by holding either the "C" or "D" key, it would not start from the CD.
Curiously, I can start it in Windows and I am using Windows right now. Some threads said that it could be a hard drive problem, but if I am using Windows, does it mean that my hard drive is fine?
I've already spent 800+ fixing the logic board in 2008 b/c of a water spill and really don't want to spend any meaningful amount of money to fix this 1000 bucks or so laptop. If any hardware is in jeopardy, I'd rather just throw it away. However, I would like to at least be able to start it in Mac OS once so that I can back up my documents.
'Ive had a MacBookPro for about a year and a half - with zero problems to report. But, yesterday, I decided to do a software update for OSX. While waiting on it, I relaized I was running late for an appointment, got impatient and did a forced shutdown (stupid move, I now know). Anyway, upon restarting it, I get the usual start-up chime, then the grey screen with the apple logo and the spinning wheel - and then it stays there. I tried putting the operating syten disc in and did a start-up - same results. Ditto for safe start. I also tried to reset the NVRAM, got the second chime, then back to the same. Is there anything you folks can suggest? Is there a way to override this and get back to normal? I hope I'm merely having hiccups related to the operating system. Or could this be a sign of the dreaded logic board failure that I fear?
Info:
MacBook Pro
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!Â
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
Upon initial restart after installation, the grey screen with the Apple icon comes up and gets stuck there. I have tried to power down and get to disk utility to try repairing permisions but it always goes to the log on screen not the recovery mode. All user ID's get a pop up that says 'you are unableto log in to the user account'x' at this time. Logging in to the account failed because an error occurred. The spinning wheel spinns by the PW the whole time the error box is up but goes away when you click OK. It also knows if you put in an incorrect PW or not Have mac mini server 10.7 and an airport extreme the net was really slow at first on other nodes so I had to move to the guest net I cannot logon to the aitport cause it is single sinon enabled Worked yesterday not today after sleeping I can log onto my Wiki page with users though?
Info:
Mac mini, Mac OS X (10.7.2), server
New iMac is stuck on grey apple screen after startup. It is a 3.4GHz Quad-core Intel Core i5 running OS 10.9.4. The problem occurred after a migration from my older 2009 iMac which is running Snow Leopard 10.6.6. When the restart occurred from Migration Assistant, the new computer will not boot up to the login screen. Disk utility did not solve problem.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
Went to the Apple store, explained my problem and they brought out a new iMac for me. Did a retail swap instead of going through the Genuis Bar. I'm so happy =) =) Got a brand new iMac. This time, I disk Disk Check right away, and it says hard drive appears to be OK. No grey progress bar anymore! The problem was probably b/c the hard drive was defective. It had nothing to do with the unsafe shutdown, or pressing shift, etc...
I have a iMac 27'.. Purchased it 2 weeks ago.
I think I did an unsafe shutdown.. Or I pressed "shift" while booting, or something.. Idk and I also have WinXP installed on BootCamp. However for some reason now every time I startup my Mac, it loads with the grey Apple horizontal progress bar with a little loading animation on top. It's so annoying. This didn't happen after no firmware upgrade or anything. And I don't have any extra hard drives attached. Nothing. Everything is fine. Everything used to work. Even with BootCamp before. I think this happened after an unsafe shutdown or something. And also, my Mac has over 500GB free space still, so that's not an issue.
The progress bar at startup Takes 5-6 min extra to boot up. After it, the Mac OS X loads and everything is fine but that's not what my problem is. My problem is why should I be getting the stupid progress bar EVERYTHING I load my Mac?
I tried booting with installation disk, then going to Disk Utility but NOTHING. I click repair, and after 5 mins some error pops up saying backup your files when you can then reformat the disk.
Oh btw, Anytime I click Repair Disk it goes, then says: Updating boot support partitions for the volume as required. And after that it says: "Disk Utility stopped repairing "MY DISK NAME HERE". Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backend-up files.
Maybe the hard drive is damaged or defective.
my iMac doesn't startup, it stops in the grey apple and the spinning gear !!!
Info:
iMac, Mac OS X (10.6.8)
MacBook 10.6.8 startup goes to grey screen with apple, wheel and progress bar, and takes 5 minutes. This started only recently. What might be wrong?
View 1 Replies View RelatedI just tried to upgrade my iMac to snow leopard (10.6.3) from cd.It remains stuck on the start page since hours : white page with grey apple logo and no spinning wheel or progression bar.Â
Info:
iMac
