After restarting when the computer powered up it goes to a grey screen and stays there and beeps 3 times continuosly. Do I need to take it for repairs?
View 2 RepliesMy iMac turns on but just beeps three times stops beeps more times and won't start up
Info:
iMac
My computer won't start up and just beeps 3 times....
Info:
MacBook, Mac OS X (10.5.8)
I have a 2006 Macbook that when powered up, the screen stays black, the machine beeps 3 times, and sleep light blinks 3 times before the process repeats over and over. When doing a search, I saw something about the RAM but
Info:
MacBook
I get the apple logo then the spinning gear then just a grey screen.
Info:
iPad 2
My iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 Replies View Relatedjust posting for some basic advice, or technical help.... I keep getting a grey screen of death its happened 3 times in the past 2 weeks, the computer resets ok and then works fine for a while .... but i don't know whats going on ... or how to check for any problems ? ? I never had this problem before, I have discovered a small dent in my rear cover near the CD drive slot, I dont know when this has occured, maybe recently ... but its minor... almost invisible ... the laptop hasn't been dropped or anything like that and I assume its happened whilst in my bag so no serious shock .... ..I don't know if this has any bearing on anything �I got a report and have posted it below : it says its processor ? ?Tbh Ive found this laptop to be very slow on certain things since I have had it, esp when launching finder �. or the dashboard, it take forever to fill in the information and finder takes ages to fill in the mb in each folder or to load the app icons and often crashes , which Iwouldnt expect with a I7 ... but this has been like it since the start so assumed it a osx bug ..., can anyone suggest anything ? ? or what i should do, i dont want this happening in the middle of working on a video project etc .
View 1 Replies View Relatedmy computer froze up and i restarted when it powered up all i got was a white screen and beeps
Info:
iMac
So I was on my MacBook and all of a sudden the screen gets some weird lines on it and then freezes. I turn it off and turn it back on and I get a black screen and 3 short beeps and it keeps going. Well I called apple and they said it is a hardware issue. I goggled it and found it is a memory issue (maybe).
View 6 Replies View RelatedFor some reason my iBook froze up, so I held the power button til it went off, then started it back up and now it just beeps 3 times and nothing, what is wrong with it?
View 9 Replies View RelatedI recently had to reformat my iMac because it was restarting constantly and it kept freezing too. After a reformat, I installed a few programs. Skype, Microsoft Office 2010, VLC, Plex Home Theatre, Plex Media Server, an uTorrent.Â
My computer restarted randomly again, twice :-( I included the crash report below if it is useful.Â
Anonymous UUID:Â Â Â Â Â Â D5BFA84C-1ECE-3EC9-ED1F-6392EF1A3BB8Â Â
Mon Dec 8 02:13:49 2014 Â
*** Panic Report ***
panic(cpu 0 caller 0xffffff80040e8887): "complete() while dma active"@/SourceCache/xnu/xnu-2782.1.97/iokit/Kernel/IOMemoryDescriptor.cpp:3307
Backtrace (CPU 0), Frame : Return Address
[code].....
Info:
iMac (27-inch, Late 2012), OS X Yosemite (10.10.1)
My Macbook Pro mid 2009 beeps three times after having change the ram from 2x2(4 Gigs) to 2x4(8Gigs) of RAM. Both new RAM modules do not work either together or by themselves. They do however work with an old RAM module, originally to have been found in my MacBook. What I need to do to make both new RAM modules work?!
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I hate in Lion how when I restart my computer, all of the applications I had open before reopen. Can I turn that off? It takes start up forever. I've seen how to uncheck "Restore windows when quitting and reopening apps" and I've uncheck that, but it doesn't work for this case. I just want to start up like normal and I pick the apps I want to open at the time
View 2 Replies View Related The file will go to the print que but will not connect to the printer. When I restart the computer it will print. I have an Apple friendly printer. Is it my network?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
MacBook Pro 15" Mid 2010 keeps restarting itself. Often times, I am using iPhoto and it restarts. However it seems to be very random and I cannot pinpoint an exact reason. This is the error report :
Anonymous UUID:      F6CE1412-9B44-5712-C3ED-EFC9E2345892  Fri Jun 6 09:50:11 2014
panic(cpu 3 caller 0xffffff7f8a9f7f7c): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80b00d8000 0x0a5480a2, D0, P3/4
"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.5.26/src/Apple MuxControl/kext/GPUPanic.cpp:127
[Code] ....
Info:
MacBook Pro, OS X Mavericks (10.9.3)
How to turn on a macbook when the light blinks and beeps 8-9 times but doesn't turn on after you push the power button.
View 2 Replies View RelatedSo, I have a late 2011 MBP 2GH i7, OSX 10.9.3. 500GB HD 16 BG 1600 Mhz DDR3. Â
The problems started a while ago when the computer started freezing at random times. The mouse would move and there was no "pinwheel" but the computer was unresponsive. When I closed the screen the power was still on and the screen did not shut off. The only way to reset the computer was to hold the power button and do a hard reset. I don't remember if I replaced the RAM from 4BG to 8GB Crucial Memory before or after the computer started freezing, either way, shortly after or around the time when I replaced the ram the hard drive also failed.
I replaced the HD with I believe a Seagate hybrid drive with a small solid state segment. This whole time the computer is still freezing and now since I have a hybrid drive the Apple store can't support because it's not factory specs and MacMall here in Santa Monica can't find anything wrong with the hardware or software after running all of their tests.Â
At this time I have a feeling it is the ram so I purchase a new 16GB Crucial RAM. Everything is great till it yet once again freezes in the same way as before BUT!! Now if the computer sleeps because the battery run's low, when I plug it in and the computer reboots (grey opaque screen with the vertical lines as the bottom) it starts beeping 3 times. I hard reset via the power button and the computer boots up as normal (although a little slower). Â
So i updated to 10.5.7 the other day and it took a few restarts to get it going, but all is well now.
i was just tooling around on my computer with several programs open as i usually do (safari looking at gmail, ical, mail, itunes, ichat, weatherdock, TM error logger), then all of a sudden a grey dim starts at the top of the screen and swipes all the way to the bottom then the following message appears: "You need to restart your computer. Hold down the power button for several seconds or press the Restart button."
Anyone else have this issue with 10.5.7? what did it mean if you had it in the past?
I'm running a mid 2007 MBP 2.4 SR, with stock 2GB RAM, stock 160GB hard drive, 2 Western Digital external hard drives, one USB for Times Machine and a FW800 for iTunes media.
Cannot receive my emails on computer but still coming through on ipad have not had any problems with e-mails previously. Also using icloud and tenda wireless router.
Info:
iMac (21.5-inch Mid 2011), iOS 5.0.1
When i start the computer and the grey screen comes up with the apple logo etc., a grey "loading" bar has started appearing in the bottom of the screen. Takes a few minutes for it to go away. In the meantime the computer gets very hot and the fans are up to 6000 rpm. Then the os starts up, and I cannot download anything, due to the fact that it thinks my harddrive is full, though i have more than 100 gb of free space.I cant even download the 10.6.2 now due to the harddrive appears to be full
View 2 Replies View RelatedMy iMac all of a sudden started to scroll down gray and then said I needed to restart. When I push the power button the screen lights up but the iMac just beeps. How do I start up?
Info:
iMac, Mac OS X (10.5.4)
I recently bought a new Mac Mini with a 24 inch Philips display. When I connected the display and started up the computer, it booted up and showed the grey apple screen, but it never made it past that. On the screen it reads "cannot display this video mode, change computer display input to 1920x1080@60Hz." As you might have realized, I can't get onto the computer to do so because I cannot see what I am doing. This is extremely frustrating because I had my Mini hooked into my friend's tv and it worked perfectly right away and now I can't even get it to connect. Does anybody know any hotkeys/solutions to this problem?
View 1 Replies View RelatedAt start up, my computer shows grey apple screen and then goes blank. Why?
Info:
MacBook Pro, iOS 8.1.2
Every time I wake up my Mac Pro, the monitor flashes 2-3 times before it is fully on. Quite annoying. Any idea what it might be? I have the latest Mac Pro 2.66 Quad (got a referub about a month ago) and LaCie 526 (same as NEC 2690). Basic video card, DVI connection.
View 2 Replies View RelatedFor the past week, my screen goes black several times a day and I need to restart with the start button to restore.Â
Info:
iMac
I came home to find my IMAC stuck at the grey apple screen with a circle of dots spinning...I've been trying to piece together the events that led up to this:
1) The night before I ran some updates including the osx 10.7.4 update and then selected restart and went to bed
2) THe next day my son says that they tried to put a DVD in and it was still on the grey screen...they inserted the DVD anyway
3) I tried unplugging etc and then rebooting but same grey screen
4) I rebooted with the track pad held down and it managed to eject the DVD
5) Now when rebooting i get 3 bleeps repeated, I've retried this a few times and its the same
6) I have rebooted using CMD R and see that the Macintosh HD is listed showing 466 GB free which I hope means that the other 534GB is still on there...not sure if I should repair itÂ
I've had this IMAC since January and am ashamed ot say that I DONT THINK I HAVE A BACK UP yet...I was ust about to buy an external HD big enough to back it up so VERY CONCERNED about losing my recently uploaded entire family home movie collection as I speak my wife is holding back the tears..
Info:
iMac, Mac OS X (10.7.2)
I have an imac from late 2008 with snow leopard. Late saturday evening 24 Mar I had powered down my imac then later turned it on. Now only a grey screen appears, nothing more. If I leave the imac on a folder with a question mark appears and blinks.I have tried the following to fix the problem and ALL HAVE FAILED:they are:
1. resetting the pram. it doesnt work.
2. booting from the installation cd. The imac doesn't even READ the cd, the screen remains grey and doesn't read the cd at all.
3. booting in the safe mode. nothing happens, the screen remains grey.
4. booting in apple hardware test mode: nothing happens screen remains grey.
5. boot with option key pressed, so as to choose mac HD or my windows partition. nothing happens, the screen remains grey.
When I power on my imac I heard the chord, a slight spin of the HHD I'm sure that's what it is,and then nothing.grey screen.I have tried unpluggling the power cord for 15 seconds, reconnecting it, waiting five secondsand then powering up the imac. it doesn't do any good.do you think it is a hard drive error or failure? why doesn't it read or boot from the instillation CD?? and yes I am using the correct disk.Â
Info:
imac 2.8 ghz int core 2 duo, Mac OS X (10.5.6)
I had that black screen come up on my imac that says you must restart your computer.Â
I power down, power up and get this grey screen  These steps have NOT worked: [URL]
Info:
iMac, Mac OS X (10.5.6)
everytime I try to boot my iMac it gets stuck at the first grey screen. No logo, no loader, nothing but a grey screen. I have tried everything here > http://support.apple.com/kb/TS2570 > with no results. The grey screen remains there, with no changes. The only thing that seems to work, but only for a seconds, is holding the option (alt) key at startup. After a few seconds, the pointer of the mouse appears.
Info:
iMac, Mac OS X (10.6.8)
url...its been there for a couple of months now but not too sure what it is, perhaps mould? I have apple care with it, but i don't think its worth taking into for inspection yet. Its located towards the right edge of the imac.
Info:
iMac, Mac OS X (10.7.4)
