I am trying to reformat my Macbook pro. I run the reinstall disc. When I type in my user name and password then click restart, the system reboots but get stuck on a grey screen. You hear the cd spinning for a minute or so but then it goes off. Do I have a bad disk(doesn't appear to be scratched anywhere) or am I not being patience enough.
Info:
MacBook Pro, Mac OS X (10.5.8)
I just had a software update on my Mac Book pro, and now it is stuck on the grey screen.
Info:MacBookPro, Mac OS X (10.6.8)
About two weeks ago I'm using my snow leopard partition of my macbook pro and browsing the internet via firefox. My mouse freezes for a second, and then my computer just shuts down. I power back up my macbook pro to find a 'cancel or prohibitory symbol'. Strange thing is I can hold down option and boot into my windows partition no problem I go through all the motions suggested by the apple website, such as resetting the PRAM etc.. Nothing works. Flash forward to today. I finally get a hold of my snow leopard installation disc and boot my macbook with it. I run the disk utility and it finds that my hard drive's good to go.
I read online and it seems that the best option would be to install snow leopard again. I decide install it again, but about halfway through the installation, the installation fails and pretty much freezes. I had to shut down the macbook via the power button. Now, whenever I try to boot up my macbook I hear the chime, but nothing happens after that. I am just left with a grey screen. I cannot enter safe mode, single user mode, and when I try to choose the start up disk by holding down option, the arrow pops up to choose which disk to pick, but there are no disks to choose from.
Mac book is stuck on the grey screen with the apple logo and the spinning timer?
Info:
MacBook
my macbook pro just gets stuck at grey startup screen
Info:
MacBook Pro (15-inch Mid 2010)
So yesterday i turned my laptop on to find out it wasnt booting up past the grey screen. Later on i did some trouble shooting and finally got it past to the main desktop screen. Now, recently i had just uninstalled and deleted my Windows 7 Pro partition i had put onto my laptop a while back but when doing so, when i tried getting my hard drive back to full storage amount by deleting the partition,it gave me some error. I believe i figured out the error and was able to use my laptop from then. Once my computer was letting me get to the desktop screen, once i would click on an app it would often give me the pin wheel and stop me from clicking on anything else for a good minute.
Today,i had backed everything up and thought that i would just reformat and re install OSX to remedy the whole issue. This was not acheived. I had been able to get to the desktop screen a few times but still got the pin wheel situation going on. A couple tries later im stuck here at my grey boot screen. No Apple sign showing up, just stuck. Im usually a very computer savey person but this is kind of just making me wonder. I ordered a new hard drive (which i was going to upgrade anyways)but wanted to know if this even could possibly be the issue. I upgraded from my stock hard drive about 6 months after i had gotten my laptop (mid 2009 model). The last 3 years ive been traveling very often, flying frequently and using it often for playing my DJ gigs. Im wondering if alltitude and hot clubs could take a tole on a hard drive when its running hot?
Info:
MacBook Pro, Mac OS X (10.6.8), 2.2 C2D,8GB RAM,320GB WD 7200RPM HD
So all of the sudden my mbp will not boot past the spinning wheel/apple screen. I have not let it try for longer than 15 minutes but I don't see the point. I tried to boot in safe mode(hold down shift) but the bar only went to about 1/3 and stopped/disappeared...so I don't know what to do. This shouldn't be happening after a couple months of light use.
Just for extra info:
I am able to boot into windows 7 via boot camp. Cannot boot from cd or go into safe mode.
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Info:MacBookPro, Mac OS X (10.6)
After partitioning my hard drive, I was not able to boot up my computer. Currently it is stuck at the white screen when it boots up. I tried using the USB Recovery Disk to boot up however it does not seem like it is responding to anything
I pressed C while having the USB inserted I also tried pressing D to go in to the Apple Hardware Test nothing happened.
I also tried resetting the VRAM? It did beep and it reset however I still can't bootup
Info:
MacBook Air, Mac OS X (10.6.8)
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state.
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail.
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen.
Info:
MacBook, Mac OS X (10.7.3)
Updated airport utility and macbook got stuck on progress bar. I restarted and it is now stuck at bootup screen.
View 3 Replies View Relatedeverytime I try to boot my iMac it gets stuck at the first grey screen. No logo, no loader, nothing but a grey screen. I have tried everything here > http://support.apple.com/kb/TS2570 > with no results. The grey screen remains there, with no changes. The only thing that seems to work, but only for a seconds, is holding the option (alt) key at startup. After a few seconds, the pointer of the mouse appears.
Info:
iMac, Mac OS X (10.6.8)
My 24" iMac has crashed and has a CD stuck in the drive. The Mac continuously reboots but never makes it beyond a blank grey screen. I do have my OS CD and I have an external time machine backup, but I can't get to a terminal prompt to do anything. I've tried all the usual suspects for getting the CD out - and there is only one CD in the drive.
I've tried holding the mouse button down, pressing the eject button on the keyboard (I tried pressing eject on both a wireless and a wired keyboard). I also tried holding command-S to boot into single-user mode which didn't work. There is no pinhole on the CD to physically eject the CD and I understand that there's no way to boot from the Time Machine. I believe that not being able to remove the CD is hindering my ability to restore and boot into single-user mode.
I am currently stuck on the grey screen of death with the flashing ? file folder.I have tried resetting the pram etc. and when i boot from my snow leopard disk the disk utility does not recognize my HD. Is there anything else I can do to fix this? Or try?
View 2 Replies View RelatedMy iMac ran a software update last night, but the program kicked out before it completed. When I went to reboot this morning, I had the Mac icon on a grey screen, with a little line rolling around in a circle below it. It's been hung up there all day.
I've read in other posts that I should do a clean install of the system software. Problem is, my hard drive is absolutely packed and the computer is telling me that I don't have enough space to do even a baisc installation without all the bells and whistles. Because the machine won't boot, I can't get into the drive to transfer or delete any files in order to create the necessary space for the installation.
My Mac Pro started having issues about 2 weeks ago. The screen would go blue every now and again for about 3 seconds and then go back to normal. It kept doing this off and on.
Two days ago the Mac Pro started making a buzzing/humming sound, loud enough to hear in the other room.
I shut it down and tried to fire it back up and it began making a clicking noise, then the humming came back. The screen froze at the grey screen and did not show the white loading wheel.
I've swapped out the drives and still the same.
The Mac is about 2.5 yrs old and I use it for video editing (FCP) and photo editing (Adobe CS3). I've never had any issues until now.
My MBP(#1) is stuck in grey screen. I've tried 4 or 5 of the steps suggested to get the computer to boot up. I used Target Disk Mode to copy hard disk files to my other MBP(#2), then inserted the Mac OSX install disk, then turned off the MBP(#1) and restarted with the C key held down. Instead of getting the OSX installation, it remained grey and gave me repeating 3-beeping sounds. What does this mean?
Info:
MacBook
Pro, Mac OS X (10.6.3)
24" imac. leopard system. the system was frozen (which was the first time in two years) a couple of days ago, so i turned the power off to reboot the system. then it's stuck at the grey screen. to make it worse, i have a dvd inserted in the drive. please tell me what seems to be the problem and how to solve it.
View 7 Replies View RelatedTurn on Mac goes to grey apple screen cog wheels spins but its stuck there tried control option p and r doesn't do anything tried turning it on while holding shift key to try and get it in safe mode but that does not work either.
Info:
iMac, Mac OS X (10.4.11)
I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel. I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel. What should I do next, or what am I doing wrong?
Vetaut
Info:
iMac
My iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 Replies View RelatedThis machine has been running fine. I installed ilife8 - had eyeTV running. It was slow, hanging, unhappy so I rebooted. It took a long time but eventually restarted - got the chime and after a few seconds the white screen/grey apple. No spinning wheel - no nothing. After a few minutes the CPU fans slowly go to full scream. Have to hold power switch to shut down. Won't go into single user mode, won't boot CD (can't even get the CD out of the machine, but the dvd never spins up). I've pulled all the memory except the original apple mem. I've tried my Kinston mem. There is nothing else in the machine that isn't pure apple.
Information:
G5 dual 2.5 up to date Tiger
Mac OS X (10.4.11)
Greetings and saluations everyone. I've recently delved into the OSX world via secondhand eMac. The specs are eMac (2006 - not a typo... this is what it says)/1.42gHz/80GB HDD/1GB ram/etc. It came equipped with 10.4.6, did an update to the software and it brought the machine to 10.4.11.
After a week or so of tinkering, I think I have accidentally deleted some very necessary system files. Given that the computer did not come with any manuals or recovery discs, I've been doing some major digging over the last three days via internet and can not come up with a fix for my new love. I saw this post on MacRumors and it nearly is exactly what I'm experiencing: Mac chimes upon pressing of start button, goes to greyish screen with grey Apple logo and a spinning progress indicator then the computer goes silent (no HDD/CD activity)... yet keeps the active grey screen.
I've tried booting into safe mode but to no avail which leads me to think I've accidentally deleted some extremely necessary boot files. However, I do not remember emptying the trash during the last successful boot... is there a way from a command line prompt to "put the files back" to where they go?
I've downloaded several Mac OSX Leopard torrents but can't get them to boot off of USB drive, DVD RW external drive, external USB hard drive nor via OSX 9 CD ... Indeed, I am trying to burn from windows but have learned of several utilities which create ISOs in Mac Format and will decompress DMG files (ISOBuster & TransMac).
Please... will someone give me some good news? For example, telling me there is a way to boot from USB drive (and in what format the mac needs to boot - ISO? DMG? Expanded file system in appropriate directory folders? I don't care about wiping the hard drive... that's absolutely fine... I just need a working system again.
Upon initial restart after installation, the grey screen with the Apple icon comes up and gets stuck there. I have tried to power down and get to disk utility to try repairing permisions but it always goes to the log on screen not the recovery mode. All user ID's get a pop up that says 'you are unableto log in to the user account'x' at this time. Logging in to the account failed because an error occurred. The spinning wheel spinns by the PW the whole time the error box is up but goes away when you click OK. It also knows if you put in an incorrect PW or not Have mac mini server 10.7 and an airport extreme the net was really slow at first on other nodes so I had to move to the guest net I cannot logon to the aitport cause it is single sinon enabled Worked yesterday not today after sleeping I can log onto my Wiki page with users though?
Info:
Mac mini, Mac OS X (10.7.2), server
New iMac is stuck on grey apple screen after startup. It is a 3.4GHz Quad-core Intel Core i5 running OS 10.9.4. The problem occurred after a migration from my older 2009 iMac which is running Snow Leopard 10.6.6. When the restart occurred from Migration Assistant, the new computer will not boot up to the login screen. Disk utility did not solve problem.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
I have a Macbook Pro 13 from the summer of 2009. After Christmas I decided to upgrade my hard drive and memory. This is what I got. [URL] For about a week everything seemed to work perfectly. I then began to have problems almost every day (finder crashing, etc). I reinstalled OSX probably 5 times using my previous account until finally did a clean wipe and reinstalled OSX again. It now seems to be working for the most part, but booting takes about two minutes. It gets stuck on the grey screen with the Apple logo with the turning gear for a couple of minutes before it boots. Normally it wouldn't bother me too much, but after the problems I was having before, I really wanted to make sure that there was no problem with my new hard drive or memory. After doing the usual suggestions for slow boot time (resetting PRAM, disconnecting external devices, repairing disk permissions, etc.) nothing changed. I booted into verbose mode and it seems to hang up for awhile before listing
disk0s2 i/o error
It does this twice before booting, hanging up for about a minute before giving the error. I am not sure if i should return it under warranty because I am not sure its broken. Like I said, it seems perfectly fine right now with the exception of the boot time. Using the Apple Hardware Check, even the extended check, didn't give any errors. The SMART status for the hard drive is verified. Is this clearly a hard drive issue, or could it be something else? Has anyone else had a similar problem?
I have a Mac Pro that is stuck at the grey startup screen. Grey apple, spinning wheel. I let it spin for about half an hour and then went on to try other things. Every attempt still leaves me stuck at the spinning grey wheel.
Info:various, Mac OS X (10.5.6)
I'm trying to reformat my MBP and I think I'm having a little trouble. This is the first time I've reformatted a mac. I put the OS X disk in, went into disk utility and did the erase. I then restarted, again booting on the disc and I've seen nothing but a white screen for the past 2 1/2 hours. The optical drive is making noises like it is reading, but I'm not sure if it can't read from the disk or it is actually formatting.
View 1 Replies View Related I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point.
grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
Info:
MacBook Pro, OS Lion
