IMac (Intel) :: Grey Screen With Spinning Wheel At Startup And Won't Go Away
Dec 10, 2014I Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
I Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
Powerbook #1: Once in terminal I typed...
/sbin/fsck -fy
...response was...
disk0s10: I/O error.
Invalid Key Length
(4, 44890)
** Volume check failed
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5)
jnl: journal_open: Error replaying the journal!
hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
I have a IMac that suddenly can't move past the grey screen, apple logos, and spinning wheel. I have used the OS system disk to repair the Macintosh HD, the app stated that the repair of the volume was successful, but in trying to use the HD to restart, I am still stuck with the spinning wheel. What should I do next, or what am I doing wrong?Â
Vetaut
Info:
iMac
So all of the sudden my mbp will not boot past the spinning wheel/apple screen. I have not let it try for longer than 15 minutes but I don't see the point. I tried to boot in safe mode(hold down shift) but the bar only went to about 1/3 and stopped/disappeared...so I don't know what to do. This shouldn't be happening after a couple months of light use.
Just for extra info:
I am able to boot into windows 7 via boot camp. Cannot boot from cd or go into safe mode.
1: Just wiped drive and re-installed OS X Lion 10.7.3.
2: Upgrade iTunes from 10.5.2 to 10.5.3.
3: Restart, normally & fast.
4: Open iTunes.
5: Close iTunes.
6: Shutdown, and get the grey screen and spinning wheel...30min...1hr...2hr...I HAVE TO PRESS THE POWER BUTTON.
Why? Is it a bug in OS X Lion or iTunes 10.5.3?(mid 2010 MacBook Pro 371, OS X 10.7.3)
Info:
MacBookPro, Mac OS X (10.7.3)
A few months ago my 2004 iMac froze as I was simply shutting down the power and attempting to restart. I was not installing any new O/S.Today I attempted two things while booting with the O/S recovery disc-1: (a) I slid the disc in and held down the "C" key while I attempted to power it on. Nothing happened and I continued to see the grey screen and spinning wheel.Â
(b) I slid the disc inside and held down the "ALT" key while I attempted to power it on. Three icons showed up: (a) Hard Disk; (b) Recovery Disc; and (c) Test. I clicked on the Test icon and it took me to a new screen with two options: ( i ) Quick Test and ( ii ) Extended Test. I clicked on Quick Test. The first aspect of the Quick Test (I think it was Airport) went through fine and passed. The second aspect of the Quick Test (Logic Board testing) continued to show "In Progress" for a really long time (about 15 mins.). From that I figured something must have gone wrong with the Logic Board.
Info:
MacBook, Mac OS X (10.6.1)
My MacBook will not load past the grey screen with the spinning wheel of death.
Info:
MacBook Pro, Mac OS X (10.7.2)
I changed the permissions from read only to read and write on my start up HD and chose the change everything inside option to read and write. After I did this, my secondary HD no longer allowed me to use it saying I did not have permission. When I tried to change it all selections were in custom mode and would not accept my changes. Same with my main HD.
I rebooted and the grey screen shows up with icon and no spinning wheel. I tried safe mode...same thing. I even tried booting off my back up firewire drive and got a null sign on the grey screen instead of an apple icon. Booted up from the G5 disk and tried to run utilities permissions repair and it would not do it, gave me an error, "No valid packages". Ran disk repair and it said nothing needs repairing. I then booted up using Disk Warrior and rebuilt the HD's directory successfully, but still the G5 will not boot past the icon grey screen, no spinning wheel. I'm spinning though...HELP, I'm dying here. FYI this is a G5 dual core Cypher running Leopard with 3.5 gigs of ram. The start up HD is 250 gig and the secondary is 500 gig
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
Info:
MacBook (13-inch Early 2008)
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
Info:
MacBook Pro, iOS 5.1
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
View 1 Replies View RelatedWhen I turn my MacBook on it does the white screen with the spinning wheel and then goes to the blue screen but it gets stuck on that screen for about a minute or two and goes to my login in screen any idea whats going on with it i have not changed anything but the other day I was turning it on and there was a bug on the keyboard and I went to kill it causing my to press some random buttons during the start up and its been doing this ever since.
View 5 Replies View RelatedI rebooted my MacBook Pro (15", i7). When the system started back up, I got a status bar at the bottom of the screen. It took approx two minutes for the status bar to move to completion (almost like it was performing a BIOS update). I then got the gray spinning wheel (gray backdrop, darker gray Apple logo). I tried holding down the CMD and Option keys during a subsequent reboot....nothing changes.
Info:
MacBook Pro, Mac OS X (10.7.4)
I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
Info:
iMac, Mac OS X (10.6.8)
My mac has crashed many times so I turn it off and on, but not it wouldn't start up.. just spinning away..
Info:
iMac, Mac OS X (10.7.4)
I was away at a friend's yesterday and left my computer on and downloading a torrent (I have done this before and everything has been fine). When I came back today, I noticed that my computer was working very slowly so I restarted it. However, it would just stay at the grey screen with the wheel spinning forever instead of moving on to the blue screen.
I know that this has been reported many times before, even on this forum, but everything I tried does not work. I tried:
Holding down Command+S at startup and entering the command fsck -fy. Did not fix the problem
Opening the Install Disc and going into Disk Utility. I repaired the permissions and verified that the HD has no problems but the problem persisted.
Going into Safe Mode. This actually works fine, but unfortunately offers an extremely limited functionality of my computer.
Gray screen spinning wheel. How do I get it to start?
Info:iMac, Mac OS X (10.6.8), Ernestine123
Imac won't shut down, blue screen with spinning wheel is on and computer never shuts until I hold the power button down and shut it manually..
Info:
iMac, Mac OS X (10.6.8)
After having inserted a dvd borrowed from the library which my Imac had a really tough time reading, I turned off my Imac as usual. Since then when I turn my mac on the fan starts roaring and i don't get beyond the first white screen with the sort of clocked wheel just going round and round. I don't have a clue to what to do.
View 4 Replies View RelatedI have a very old IMac which I purchased back in 2005, and has been working fine. I have left it in storage about 1 and 1/2 years ago. Just now I try to restart it, the screen is forever stuck in the grey screen with the spinning wheel. I tried many times off-on, hold down the apple function key but none worked. I no longer have the rebooting CD with me. I wonder whether the computer can still be saved? I have already backed up the contents so it doesn't matter if fixing the computer requires me to delete all my old files. I think it's tiger or earlier that it's using.
Info:
iMac, Mac OS X (10.4)
My early Intel iMac (2006) won't shut down - gray spinning wheel and blue screen for more than 2 hours now. Can I safely turn it off with the power button? (I'm a little paranoid after a bad experience doing that with my MacBook Pro).what I should I do then?
Info:
iMac, Mac OS X (10.4.7)
My iMac is really slow when I turn it on. The internet starts to come up but I get the dreaded spinning colored wheel. I have another Windows computer that hits the internet immediately. I am seeing the spinning wheel more and more all the time.
View 2 Replies View RelatedI had LogMeIn installed on my iMac and it worked fine for a while. Then the icon for the program in the menu bar at the top of the screen went gray. When I hover the mouse over the icon a spinning pinwheel appears, so I can't click the icon to start the program. I deleted the program and then reinstalled it, but the gray icon and spinning wheel never whent away. how to delete the spinning wheel
Info:
iMac, Mac OS X (10.6.8)
I have a Mac Mini that my sister gave me because she said it stopped working. She said she wanted me to get all her photos off of it. Its a Model A1176 1.66/2X512/80/COMBO/AP/BT I tried playing with it and it powers up, shows the Apple on a grey screen with a spinning little icon.. It does that for about 30 sec and then turns off. I opened it up, took the hard drive out, put it into an external USB case and hooked it up to my Windows PC and loaded MacDrive 8 software. Got the drive to be recognized on the PC and backed up all her photos.
View 20 Replies View RelatedI have an intel imac - can't tell you much about the details as I can't get any info out of it. I installed snow leopard about a year ago - no issue since then other than occassionally the screen goes black but nothing major.Yesterday, I backed up to my usual passport backup and then today, it froze. I couldn't turn it off or restart at all so resorted to the power button. Since then, I can turn it on, it goes to the grey screen (no blue screen) and I get the apple logo and the spinning clock/wheel. For hours and hours....So, I tried one of the apple support pages and worked through - peripherals, safe boot, NVRAM, PRAM, tried to reboot with mac osx disc (the original not snow leopard) - nothing. Absolutely nothing changes - same old grey screen, apple logo and spinning clock/wheel.
Info:iMac, Mac OS X (10.6)
on startup with my mac book i get an apple logo and a spinning wheel where it either continues like this or switches itself off.
View 4 Replies View RelatedAll of a sudden I was restarting my Air and now, it just has the spinning wheel for a few seconds and then goes blank and shuts down. I have tried everything the 'guide trouble shoots' but nothing has worked. Even was able to test the hard drive and it came back with no trouble. I tried to 'return to factory setting' but no luck and also tried resetting the Parameter RAM.
View 6 Replies View RelatedMy daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data? Â
Info:
iMac, Mac OS X (10.4.4)
My screen has gone to a very dark grey on startup. I can faintly make out the desktop icons, but it is about 98% black. Everything else seems to be fuctioning. iMac G417" Flat Panel 17" [Pixar-lamp style] OS 10.4
View 4 Replies View Related