MacPro late 2008 running 10.5.8;during startup I hear the tone and the apple appears on screen and the little spinning symbol appears...a few seconds later a grey screen decends and a message appears;"You need to restart your computer" ...so I do and the process is repeated... and repeated. Tried checking the battery/full and seems to OK .....
View 6 Replies
So i updated to 10.5.7 the other day and it took a few restarts to get it going, but all is well now.
i was just tooling around on my computer with several programs open as i usually do (safari looking at gmail, ical, mail, itunes, ichat, weatherdock, TM error logger), then all of a sudden a grey dim starts at the top of the screen and swipes all the way to the bottom then the following message appears: "You need to restart your computer. Hold down the power button for several seconds or press the Restart button."
Anyone else have this issue with 10.5.7? what did it mean if you had it in the past?
I'm running a mid 2007 MBP 2.4 SR, with stock 2GB RAM, stock 160GB hard drive, 2 Western Digital external hard drives, one USB for Times Machine and a FW800 for iTunes media.
My iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 Replies View RelatedSo I did read though the previous forum relating to this problem. None of the posters were having the exact issue I am, and I could not find a solution within.
my hardware: powerbook G4. 1.33GHz Power PC. (upgraded to) 2GB DDR SDRAM. (just upgraded to) 320GB WD HDD
my OS: Just installed 10.4.11
Here's the scenario (I hope someone can help):
Several months ago my poor baby took a dive off a counter onto the tile floor, while running. Never before this did I see the "Kernal Panic" restart screen.
Immediately following the fall, I get the error if the computer is bumped, moved or if I put weight on the keyboard (palms).
I feared it was a HDD issue so I hastily replaced the toshiba 60GB HD with a WD320 HD. And at the same time I upgraded from 10.3.9 to 10.4.11.
The computer seemed fine for a couple weeks, now I am getting the error again with increasing frequency. Mostly when I put pressure on the keyboard (palms).
What I tried: new HD, new OS, checked the RAM to see if it had come loose in the fall.
Could it be my video card? Is it more likely hardware or software?
I have a problem with my new 13" macbook air. Randomly the screen gets grey and a sign prompts me to restart.
Info:
MacBook Air, Mac OS X (10.7.3)
i did a system restore using my installation disk,i went to utilities and restored to the 14/05/12 but when i restarted the system i get a message saying do a system restart and when i do i get the same message,any ideas please on getting my system back up and running ?
Info:
Mac mini, Mac OS X (10.6.8), snow leopard
I was using garage band when the screen popped up saying that i need to restart my computer. i tried holding down the power button but the screen is frozen. the computer is making a quiet clicking sound. if i close the laptop the light stays on and the sound persists.
View 2 Replies View RelatedI sure hope your day is faring better than mine...To try and make my new issue easier to follow and to save face as I feel like an idiot, permit me to explain in bullet format:
First things first: I was running 10.6.8 SL on my 2006/7 model MacBook pro 15.4 w 2 gig sdram, right now I'm running nothing. When I turn on Mac it goes to grey screen and I see a folder/?/apple symbols rapidly interchanging on screen. This occurred after trying to use TM for my first time as I deleted some items I shouldn't have. In time machine all seemed kosher until the first attempt said not enough space on hd so I decided to only click on sys folder in TM. this was where prefs and files were accidentally deleted from after all. The kicker is my Mac still functioned I just noticed my HD no longer had a name, and a few other issues were happening, but I could access and open files, go online, etc... Post time machine none of that was possible! I tried first putting SL disk in but wouldn't read it, so tried restarting w disk in drive. HUGE ERROR on my part. This is where the grey screen desc above took its place. I looked on iPhone and have followed all available suggestions but have come to realize at some point I must have in error created a firmware Pw. I tried entering it but the lock simply stays put (when I attempted one of many fixes to my problem listed online). So now I'm left not knowing if whatever happened messed w my firmware pw or if I somehow chose something diff as pw but I highly doubt that. In any case, I have all of my life locked into a useless box now and I had thought this is why I bought external and used time machine. I've come to loathe TM. it's not as simple as I had thought otherwise none of this dshould have occurred. Does anyone have any ideas as to how I reset or altogether delete firmware pw, and best way to reinstall.
Info:MacBookPro, Mac OS X (10.6.8), 2.16 GHz Intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM
I tried to press shift, cmd and v during startup which notified that the os x version cannot be identified!
Info:
MacBook Air
I have a 2008 MacPro Octo 2.8GHz. Whilst I was in Vista64 (a separate drive, not visualization) I was playing a halflife game called day of defeat. The game froze twice, requiring a crtl-alt-del to release it and stop the application that was not working. When I then rebooted into OSX, the "You need to restart your computer" screen appeared in 4 languages, which I believe is the Kernel panic screen. I've done the hardware test that reports no problems (D key). I've tried re-installing the operating system, (C key), no go just panics. I've tried a safe boot (shift) lots of disk activity followed by a panic. I've even reset the PRAM, no effect.
The queer thing is it will boot into Vista64, but there is some screen corruption whilsts its booting, but once in, it works OK with the exception of playing any 3D games, they will not launch (re-installed drivers). Vista reports that there is no 3D hardware acceleration. Does OSX require 3D just to get past the login screen? I've removed some ram and removed all the other hard drives. I'm beginning to think the 8800GT is playing up, otherwise why would vista still work?, but not 3D games? Is there any software I can use in Vista to check the 8800GT? I also noticed that it seemed to be taking longer and longer to shut down.
My Snow leopard machine hangs during startup at the screen with the Grey Apple logo. It appears there is a SW issue with my OS X boot partition. Here are facts I have learned:The computer boots fine if I hold option at startup and select my boot camp partitionThe compute boots fine if I attach an external HD with OS X 10.6Running a disk repair from the external HD, I see the following two issues that are repaired. Also, note the last line about boot partitionsAfter this disk repair, the disk will still not boot, it hangs at the Grey Apple logo.Booting in safe mode does not resolve the issue, the machine will still not boot to a desktopBooting in Verbose mode, drivers initialize with the last succesful line being the ethernet drives (I believe) and then the hangup occurs. It is unclear what state the boot process is at on the hangup.
This situation has happen twice in the past few weeks. The first time I did a reinstall of OS X to resolve the issue. Then, the issue appeared again approximately two weeks later. I'm hoping to avoid a second reinstall (And really, avoid this issue in the future). It seems perhaps something in the boot partition table or the OS partition, although disk utility says the partition is fine. I have downloaded Test Disk 6.13 to look at the partition table, but I don't know how to interpret the outputs of that program.
Info:
MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.6.3), 2 GB RAM, Boot Camp, Ex HD avail
I've had my imac for a few weeks now with only one problem that's recently occured and the problem is this. During the process of uploading attachments to emails or posts or uploading anything to putfile, the screen dims from the top and I get a multilingual message telling me to hold down the power button for several seconds. This first occured while uploading a .zip file.
View 4 Replies View RelatedWith my Macbook, I just did a software update to be able to use the newer version of AIM. So I let the updates install and the let the computer restart. So when I turn it on I keep getting this message: You need to restart your computer. Hold down the Power button for several seconds or press the Restart button.
View 6 Replies View RelatedThe other day my 1st gen MBP functioned without any probs, until it suddenly powered down. After I removed the question marks from my eyes, I offcourse tried to reboot it.
But it never makes it beyond the grey screen, sometimes untill the apple logo, sometimes not even that far.
Offcours I googled around first to gather some info before I decided to put this problem down on this board. I found this could be a HDD failure, but in those cases, with other people, it could be powered holding apple + s, and doing some checks that way.
Mine doesn't even come that far
I have a second hand 1st gen MBP with upgraded HDD and RAM, snow leopard, and coincidently since last week no more battery... so i may have powered down a completely unprepared mac by tripping over the wire, once or twice...
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state.
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail.
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen.
Info:
MacBook, Mac OS X (10.7.3)
Have tried different things that have been suggested....reboot PRAM holding down option command P R etc but nothing yet has worked. Don't have installation disk as MacBook is 9 years old so must've thrown disk out years ago.
Info:
MacBook, Mac OS X (10.6.4)
My imac has started to have a kernel panic all the time lately. It is where the whole screen will go darker and then a box in all different languages comes up saying I need to restart the computer. I have a couple of questions in relation to this, first if I reinstall and then back up from timemachine will I have the same issue again? If I do a fresh install and reimport all my music and vids manually will that be a better way to do things?
View 3 Replies View RelatedI have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.
Can a bad video card make a Mac Pro stall out at the grey screen, spinning ball, but yet able to boot in safe mode?
Info:
Mac Pro, Mac OS X (10.6.8)
i just updated efi firmware on my macbook pro (late 2011).. and my mbp always starts with a grey screen (not white screen anymore) and the apple logo with a status wheel evertime i turn it on.
Info:
MacBook Pro, Mac OS X (10.7.3)
We own a very old model macbook and the startup screen appears as grey and an icon appears in the shape of a file with a question mark in the middle and the startup does not proceed from there.
Info:
MacBook
I shut down my imac and when I went to restart it, I can't get it to get past the grey screen.I can't even get to the apple screen.I have unplugged everything and nothing works.
Info:
iMac, Mac OS X (10.7.3)
New iMac is stuck on grey apple screen after startup. It is a 3.4GHz Quad-core Intel Core i5 running OS 10.9.4. The problem occurred after a migration from my older 2009 iMac which is running Snow Leopard 10.6.6. When the restart occurred from Migration Assistant, the new computer will not boot up to the login screen. Disk utility did not solve problem.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
At start up, my computer shows grey apple screen and then goes blank. Why?
Info:
MacBook Pro, iOS 8.1.2
I am having trouble with my macbook: It wont load past the Grey apple start up screen with the spining gears, iv done Zapp on the PRAM, iv run ""/sbin/fsck -fy"". And I am now starting in Verbose mode, but its taking AGES, it must be loading for an hour now, its showing "Neb-computer /System/library/coreservices/loginwindow.app/contenst/MacOS/loginwindow: Login window Application started (Over and over and over again). I don't have an install disk.
View 1 Replies View RelatedI have a mid-2007 model and I replaced the x2 stock 1GB sticks with x2 2GB sticks. I followed the correct procedures, (I think), and when I powered it on the fan came back on but the screen was black. I unplugged the unit and replaced put the old RAM back in and now when I power it up the screen just goes grey and beeps when I turn it on.
Info:
Mac OS X (10.6.8)
My screen has gone to a very dark grey on startup. I can faintly make out the desktop icons, but it is about 98% black. Everything else seems to be fuctioning. iMac G417" Flat Panel 17" [Pixar-lamp style] OS 10.4
View 4 Replies View RelatedI just installed OS X 10.6 and now when i try to turn on my computer, i get this grey screen with computer code on it and the black box that says to restart my computer. I tried safe boot along with all the other steps on the page for the grey screen but nothing works.
Info:
iMac, Mac OS X (10.6)
My girlfriend's Macbook gave her the restart computer, kernal panic message earlier today when she tried to open a .tiff file in Photoshop CS3. She did as she was told, however now the computer won't get past the apple logo when we hit the power button. Every time the message comes up. I have had a look around the net and tried the advice I could find, but haven't had any luck.
I have tried resetting pram and the other one. I have also taken out each memory one at a time to see if this makes a difference, but each time the message still appears. She has a 2007 Macbook Pro running Snow Leopard, which we upgraded around a month ago from Tiger. It's got 2gb of ram and I think 2.2Ghz Intel Core Duo Processor.
MacBook 10.6.8 startup goes to grey screen with apple, wheel and progress bar, and takes 5 minutes. This started only recently. What might be wrong?
View 1 Replies View Related
