I just installed OS X 10.6 and now when i try to turn on my computer, i get this grey screen with computer code on it and the black box that says to restart my computer. I tried safe boot along with all the other steps on the page for the grey screen but nothing works.
Info:
iMac, Mac OS X (10.6)
My computer started having problems some two weeks ago.First it was very slow then it blocked during the use of Photoshop.At that stage I used Apple jack to test and solve the problem and it worked.But two days later the problem came again as a verry slow start-up.I checked the disk and there was no problem signaled.I tried to boot the computer on the installation disk in order to execute the Hardware test...The test gave the folowing error code: 4HDD/11/40000004:SATA(0,0)Â
Info:
iMac, Mac OS X (10.6)
I have a mid-2007 model and I replaced the x2 stock 1GB sticks with x2 2GB sticks. I followed the correct procedures, (I think), and when I powered it on the fan came back on but the screen was black. I unplugged the unit and replaced put the old RAM back in and now when I power it up the screen just goes grey and beeps when I turn it on.
Info:
Mac OS X (10.6.8)
My iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 Replies View RelatedI Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
Can a bad video card make a Mac Pro stall out at the grey screen, spinning ball, but yet able to boot in safe mode?
Info:
Mac Pro, Mac OS X (10.6.8)
i just updated efi firmware on my macbook pro (late 2011).. and my mbp always starts with a grey screen (not white screen anymore) and the apple logo with a status wheel evertime i turn it on.
Info:
MacBook Pro, Mac OS X (10.7.3)
I am having trouble with my macbook: It wont load past the Grey apple start up screen with the spining gears, iv done Zapp on the PRAM, iv run ""/sbin/fsck -fy"". And I am now starting in Verbose mode, but its taking AGES, it must be loading for an hour now, its showing "Neb-computer /System/library/coreservices/loginwindow.app/contenst/MacOS/loginwindow: Login window Application started (Over and over and over again). I don't have an install disk.
View 1 Replies View RelatedMy screen has gone to a very dark grey on startup. I can faintly make out the desktop icons, but it is about 98% black. Everything else seems to be fuctioning. iMac G417" Flat Panel 17" [Pixar-lamp style] OS 10.4
View 4 Replies View RelatedI sure hope your day is faring better than mine...To try and make my new issue easier to follow and to save face as I feel like an idiot, permit me to explain in bullet format:
First things first: I was running 10.6.8 SL on my 2006/7 model MacBook pro 15.4 w 2 gig sdram, right now I'm running nothing. When I turn on Mac it goes to grey screen and I see a folder/?/apple symbols rapidly interchanging on screen. This occurred after trying to use TM for my first time as I deleted some items I shouldn't have. In time machine all seemed kosher until the first attempt said not enough space on hd so I decided to only click on sys folder in TM. this was where prefs and files were accidentally deleted from after all. The kicker is my Mac still functioned I just noticed my HD no longer had a name, and a few other issues were happening, but I could access and open files, go online, etc... Post time machine none of that was possible! I tried first putting SL disk in but wouldn't read it, so tried restarting w disk in drive. HUGE ERROR on my part. This is where the grey screen desc above took its place. I looked on iPhone and have followed all available suggestions but have come to realize at some point I must have in error created a firmware Pw. I tried entering it but the lock simply stays put (when I attempted one of many fixes to my problem listed online). So now I'm left not knowing if whatever happened messed w my firmware pw or if I somehow chose something diff as pw but I highly doubt that. In any case, I have all of my life locked into a useless box now and I had thought this is why I bought external and used time machine. I've come to loathe TM. it's not as simple as I had thought otherwise none of this dshould have occurred. Does anyone have any ideas as to how I reset or altogether delete firmware pw, and best way to reinstall.
Info:MacBookPro, Mac OS X (10.6.8), 2.16 GHz Intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM
MacBook 10.6.8 startup goes to grey screen with apple, wheel and progress bar, and takes 5 minutes. This started only recently. What might be wrong?
View 1 Replies View RelatedEver since I downloaded 10.7.4, a blank grey screen appears at startup. If I click on the mouse, a white square cursor appears which I can drag around and `uncover` a place to input password. Then the galaxy image appears, and I have to input password again.
Info:imac, Mac OS X (10.5.1)
I have a mac pro running 10.6.6. Occaisionally startup gets stuck at a grey screen and requires a hard reboot or two. I've not found any correlation between what is plugged into the mac or not plugged in and the successful or unsuccessful startup. It just appears random. I've begun studying the console for anything that might indicate what's going on when this happens. One thing I notice is the following line: 2/2/12 8:37:31 AMcom.apple.launchd.peruser.501[134](com.apple.FolderActions.folders) Path monitoring failed on "/Volumes/LittleWet_02/SFX_aiff": No such file or directoryÂ
This line was the last line in the console before the hard reboot a few times, suggesting it might be the culprit. The volume it is looking for is an external HD that was connected to this computer once almost a year ago and never again. I can't determine what startup process is looking for that SFX_aiff directory, or why. Is there any way to tell this system to cease looking for that volume upon startup? Â
Info:
Mac Pro, Mac OS X (10.6.6)
My Snow leopard machine hangs during startup at the screen with the Grey Apple logo. It appears there is a SW issue with my OS X boot partition. Here are facts I have learned:The computer boots fine if I hold option at startup and select my boot camp partitionThe compute boots fine if I attach an external HD with OS X 10.6Running a disk repair from the external HD, I see the following two issues that are repaired. Also, note the last line about boot partitionsAfter this disk repair, the disk will still not boot, it hangs at the Grey Apple logo.Booting in safe mode does not resolve the issue, the machine will still not boot to a desktopBooting in Verbose mode, drivers initialize with the last succesful line being the ethernet drives (I believe) and then the hangup occurs. It is unclear what state the boot process is at on the hangup.Â
This situation has happen twice in the past few weeks. The first time I did a reinstall of OS X to resolve the issue. Then, the issue appeared again approximately two weeks later. I'm hoping to avoid a second reinstall (And really, avoid this issue in the future). It seems perhaps something in the boot partition table or the OS partition, although disk utility says the partition is fine. I have downloaded Test Disk 6.13 to look at the partition table, but I don't know how to interpret the outputs of that program. Â
Info:
MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.6.3), 2 GB RAM, Boot Camp, Ex HD avail
The other day my 1st gen MBP functioned without any probs, until it suddenly powered down. After I removed the question marks from my eyes, I offcourse tried to reboot it.
But it never makes it beyond the grey screen, sometimes untill the apple logo, sometimes not even that far.
Offcours I googled around first to gather some info before I decided to put this problem down on this board. I found this could be a HDD failure, but in those cases, with other people, it could be powered holding apple + s, and doing some checks that way.
Mine doesn't even come that far
I have a second hand 1st gen MBP with upgraded HDD and RAM, snow leopard, and coincidently since last week no more battery... so i may have powered down a completely unprepared mac by tripping over the wire, once or twice...
I own an iBook G4. I could not get it to boot up, it would just go to a grey screen with the apple symbol and a timer/clock that looked like a gear.FYI: I may provide more information than necessary in the text below. I'm not sure what is and isn't relevant.
Following some advice I found in this forum I got out my old OS disks to boot from the disc instead of the hard drive. I intended to archive the old hard drive and install my latest OS (10.4.6 on the disc, 10.4.11 was the version I had been running on the machine, I believe). The machine told me it needed 4.5 Gb to install 10.4.6 Tiger, but I only had 4.0 Gb left on the hard drive. So instead, I archived and installed with the OS that came with the computer originally, 10.3.4.
I got things going, did the archive and install, and got to the log in screen. Unfortunately, I could not remember the password, so I booted up in single user mode, and entered the following to get into the machine:
1. mount -uw /
2. rm /var/db/.AppleSetupDone
3. shutdown -h now
This got me in with a new admin login, and I started up in 10.3.4. I soon noticed that I could still see all of the files that I put on the hard drive on my old operating system. I thought I shouldn't be able to see them, but since I could I decided to try to copy them to an external hard drive. When I did, I got an error message saying that there was a read/write error. I was not entirely surprised, but I decided it was time to turn back to the forums for help.
What I want to do is copy everything from my old hard drive onto an external hard drive, make room on the iBook hard drive to reinstall my latest operating system (10.4.6). Once I've done that I'd like to get the essential files back onto the iBook from the external hard drive and continue using my computer (even though it is a dinosaur).
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state. Â
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail. Â
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen. Â
Info:
MacBook, Mac OS X (10.7.3)
So out of nowhere my unibody MBP (specs, etc below) locked up yesterday while I was watching a video using VLC. It stopped responding to anything so I held down the power button until it turned off. I waited about 10 minutes and turned it back on. Grey screen with spinning cog showed up for about a minute and then kernel panic. Held down power button until it turned off. Tried repeatedly - same results. Won't boot into Safe Mode - still get a kernel panic everytime. It will let me boot the machine into Target Disk Mode. It will boot from my Snow Leopard install disk where I ran Disk Utility and "repaired disk" and "repaired disk permissions" on both the drive and the volume. All the "repair disk" and "repair disk permissions" ended with messages in green type saying that the disk/permissions appear to be OK.Â
I have an external FW drive used for TM backups for the machine. A fair amount of data has been added since the last TM backup (which was less than 30 days ago) that, ideally, I'd like to not lose by resorting to restoring from a TM backup. It's not the end of the world if the last (roughly) 30 days of data/changes ends up being lost, but I'm willing to work on getting it back up and running without doing an erase and install and then restoring from a TM backup if at all possible.Â
Definitely if any other information or data is needed from me in order for anyone to assist, please let me know what it is and I'll do my best to provide it.Â
Hardware Overview:Model Name: MacBook ProModel Identifier: MacBookPro5,1Processor Name: Intel Core 2 DuoProcessor Speed: 2.66 GHzNumber of Processors: 1Total Number Of Cores: 2L2 Cache: 6 MBMemory: 4 GBBus Speed: 1.07 GHzBoot ROM Version: MBP51.007E.B06SMC Version (system): 1.41f2Â
[Code]...
Have tried different things that have been suggested....reboot PRAM holding down option command P R etc but nothing yet has worked. Don't have installation disk as MacBook is 9 years old so must've thrown disk out years ago.
Info:
MacBook, Mac OS X (10.6.4)
When I hold down Option on boot up, it loads to a grey screen with a dark grey padlock. Under that is a password entry field then a dark-grey circle with a right pointing arrow. I've tried every password I can think of but it does nothing. When I click enter the password just dissapears.
Info:iMac, Mac OS X (10.7.3)
I have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)Â
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.Â
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.Â
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
Powerbook #1: Once in terminal I typed...
/sbin/fsck -fy
...response was...
disk0s10: I/O error.
Invalid Key Length
(4, 44890)
** Volume check failed
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5)
jnl: journal_open: Error replaying the journal!
hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
We own a very old model macbook and the startup screen appears as grey and an icon appears in the shape of a file with a question mark in the middle and the startup does not proceed from there.
Info:
MacBook
This morning, my G4 refused to start up as usual. Instead, I got a grey screen. Here's what I've tried so far and the results: Action: Started from DVD Install disk for Leopard to try an archive and install. Result: No hard drive was recognized for an install, archive and install, or erase and install, i.e., no drives appeared at all in the "Select a Destination" window, just empty white space. Action: Attempted safe boot (Command + Shift + V) Result: Flashing Globe Action: "Repair Disk" from Disk Utilities after starting from DVD Install disk for Leopard.
Result: Received "First Aid Failed" message. Error message read: "Catalog file entry not found for extent. Volume check failed." I can't even get it to eject the install disk (the "eject" key does nothing and there's no manual eject button for this Power Mac). This is a work computer and not having it functional is pretty hobbling so.
MacPro late 2008 running 10.5.8;during startup I hear the tone and the apple appears on screen and the little spinning symbol appears...a few seconds later a grey screen decends and a message appears;"You need to restart your computer" ...so I do and the process is repeated... and repeated. Tried checking the battery/full and seems to OK .....
View 6 Replies View RelatedI came home to find my IMAC stuck at the grey apple screen with a circle of dots spinning...I've been trying to piece together the events that led up to this:
1) The night before I ran some updates including the osx 10.7.4 update and then selected restart and went to bed
2) THe next day my son says that they tried to put a DVD in and it was still on the grey screen...they inserted the DVD anyway
3) I tried unplugging etc and then rebooting but same grey screen
4) I rebooted with the track pad held down and it managed to eject the DVD
5) Now when rebooting i get 3 bleeps repeated, I've retried this a few times and its the same
6) I have rebooted using CMD R and see that the Macintosh HD is listed showing 466 GB free which I hope means that the other 534GB is still on there...not sure if I should repair itÂ
I've had this IMAC since January and am ashamed ot say that I DONT THINK I HAVE A BACK UP yet...I was ust about to buy an external HD big enough to back it up so VERY CONCERNED about losing my recently uploaded entire family home movie collection as I speak my wife is holding back the tears..
Info:
iMac, Mac OS X (10.7.2)
I have an imac from late 2008 with snow leopard. Late saturday evening 24 Mar I had powered down my imac then later turned it on. Now only a grey screen appears, nothing more. If I leave the imac on a folder with a question mark appears and blinks.I have tried the following to fix the problem and ALL HAVE FAILED:they are:
1. resetting the pram. it doesnt work.
2. booting from the installation cd. The imac doesn't even READ the cd, the screen remains grey and doesn't read the cd at all.
3. booting in the safe mode. nothing happens, the screen remains grey.
4. booting in apple hardware test mode: nothing happens screen remains grey.
5. boot with option key pressed, so as to choose mac HD or my windows partition. nothing happens, the screen remains grey.
When I power on my imac I heard the chord, a slight spin of the HHD I'm sure that's what it is,and then nothing.grey screen.I have tried unpluggling the power cord for 15 seconds, reconnecting it, waiting five secondsand then powering up the imac. it doesn't do any good.do you think it is a hard drive error or failure? why doesn't it read or boot from the instillation CD?? and yes I am using the correct disk.Â
Info:
imac 2.8 ghz int core 2 duo, Mac OS X (10.5.6)
I had that black screen come up on my imac that says you must restart your computer.Â
I power down, power up and get this grey screen  These steps have NOT worked: [URL]
Info:
iMac, Mac OS X (10.5.6)
everytime I try to boot my iMac it gets stuck at the first grey screen. No logo, no loader, nothing but a grey screen. I have tried everything here > http://support.apple.com/kb/TS2570 > with no results. The grey screen remains there, with no changes. The only thing that seems to work, but only for a seconds, is holding the option (alt) key at startup. After a few seconds, the pointer of the mouse appears.
Info:
iMac, Mac OS X (10.6.8)
url...its been there for a couple of months now but not too sure what it is, perhaps mould? I have apple care with it, but i don't think its worth taking into for inspection yet. Its located towards the right edge of the imac.
Info:
iMac, Mac OS X (10.7.4)
