What cause my imac to freeze? running sno leopard, hard drive changed 6 months ago, happens on safari and iphoto(11)
Info:
iMac (20-inch Late 2006), Mac OS X (10.6.8), hard drive replaced 6 months ago.
iMac 27 late 2009 freeze while is working. Nothing works on computer even when a video is playing. I have a 12 GB of RAM and 502 GB free disk space. I checked disk utility and CPU is working fine. I don't know why the iMac is freezing with so much space.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4)
I've seen so many posts about this, but with the limited time I have between system freezes, in desperation I come here. I'm running Leopard 10.5.8 on desktop IMac. I have plenty of memory, but don't know how to check the hard disk space (I'm an ubernoob). I've run a couple of the mac maintenance programs still to no avail. I get intermittent SBBOD where NOTHING responds and have to do a hard reboot. Doesn't matter what applications are up, as even startup is very slow when in SBBOD mode. Rebooting, then, doesn't resolve the issue. It runs fine when the SBBOD is not present.
View 6 Replies View RelatedMy mac just blew out a lot of dust and now the fan is very loud.
Info:
iMac, Mac OS X (10.6.8)
Is there a way to Migrate the OS X Lion from my new iMac to my 2007 Macbook running Snow Leopard ?
Info:
iMac, Mac OS X (10.7.3)
I bought an iMac on dec, 2010 it came with snow leopard and a wired aluminum keyboard, everything was good until dec, 2011 when my keyboard suddenly stopped working, I took it to an apple store and they replaced it, everything was fine until last month when my new keyboard stopped working again.
I have an old macbook (1st gen of intel-based macbooks) and if I connect the keyboard to that macbook it works just fine, I have checked and all the USB ports on my iMac and they work but when I connect the keyboard it just doesn't recognizes it as a keyboard (or as anything because it doesn't show on system profiler). I have connected another keyboard I own (a logitech wireless one) and the imac recognizes it, I don't know what to do.
Btw, if I disconnect the keyboard for a day or two it works again when I connect it to the iMac, also If I use the USB ports attached to the keyboard I get an error that the USB is taking too much power and it shuts down (and then the keyboard stops working again on the iMac)
Info:
iMac, Mac OS X (10.6.8)
How do I add memory to my iMac purchased in 2008 currently running Snow Leopard to upgrade to Lion?
Info:
iMac
Can I reboot my iMac running ox 10.9.4 using my Snow Leopard install disc?
Info:
iMac, OS X Mavericks (10.9.4)
I dont know whats going on but suddenly all my "third party applications"( not included in iLife) started to freeze after I open them. (Keynote, Pages, Skype, MSN Messenger, just to name a few). I have to force quit them.
View 1 Replies View RelatedI was messing with my Mac Mini late 2006 and accidentally deleted my entire Macintosh HD Hard drive .What do I do ? And I dont have the reinstall disks!
Info:
Mac mini, Mac OS X (10.4)
It seems that prior updates worked. However, when I update to 10.6.8 my system will freeze. The only that that moves is my cursor.I can be on the web, scrolling. It will happem when new email is being down loaded. I can be working on th PC side and will experence it. I ran the "Disk" repair. But even after the run is done the system will work for a short while and the freeze. Now I can reinstall 10.5 "Snow Lepoard" and not update to the latest "Package" update and all works well. So the main question is "What gives?". Its very troublesome. Is there any soulition to this?
Info:
iMac (20-inch Mid 2007), Mac OS X (10.6.8)
I have just acquired a late 2006 24" iMac with 1GB of RAM. It came with Leopard installed, disks for Leopard and Snow Leopard, and iLife '09. The hard disk was full, as in, zero K free. I threw away a lot of stuff, ordered 3GB of RAM from OWC, and installed Snow Leopard. I then noticed several one-pixel high horizontal lines on the display, and the Mac would freeze up on occasion, but I thought it just needed RAM. I opened iPhoto and played with Faces for quite a while. The next day, I opened a different iPhoto library (my libraries are on an external firewire hard drive) and the Faces scan made the computer freeze. I closed iPhoto, and bits of windows started missing, or repeating themselves as I dragged the mouse. Sometimes there would be "holes" in windows showing my desktop image underneath, or lines of bright pixels would appear. I still thought it was the lack of RAM. Repairing the disk with Disk Utility didn't make any appreciable difference.
Today the RAM arrived and I installed it. The Mac sees it, but the problem has not gone away, it has in fact gotten worse. Every time I go to Disk Utility (starting up from the SL disk), it shows problem, I let it do the repair, it comes up successful, I restart, and it happens all over again. When I do a Safe Boot, everything is perfect. Should I reinstall SL? iPhoto? Downgrade back to Leopard? Is my hard disk bad?
Info:
iMac, Mac OS X (10.5.8), 24" Intel
Can I upgrade from OS X 10.6.8 to OS Lion on an IMac purchased in 2006?
Info:iMac, Mac OS X (10.6.8)
While online in either Safari or Firefox my cursor as I am navigating a page will suddendly freeze on screen. I them am forced to relaunch finder, then unplug my mouse from the keyboard and once again, relaunch the finder.Then the cursor will move again. Any solutions to this problem guys? This is really driving me nuts. It happens about 5 times an hour!
Info:
Mac mini, Mac OS X (10.6.8)
I bought my first uMbp the day Snow Leopard came out. Unfortunately, it was not installed on the uMbp. So upon running the mbp for the first time, I proceeded to install SL.
Now occasionally, maybe a once every other day, whenever I open up a few applications like Word or maybe even a new tab in Firefox, everything would freeze and the spinning color wheel would spin for about 30 or so seconds and everything would resume to normal.
Now I ask, is this normal behavior? I have the 2.26ghz uMBP edition with 2gb of ram.
Should I go ahead and do a clean re-install?
I recently moved and am connecting my iMac (2006 Intel) via the internal Airport card to a high-speed cable network here at home.
For some reason, my connection started off fine but after a few hours (sometime minutes) of browsing the web, the connection will slow to a crawl or just stop completly.
I've tried changing the DNS settings, turning Airport off/on, re-booting the wireless router (it's a Netgear) all to no avail.
The connection will seem to be okay and then...back to the molasses slow or no connection at all. At my previous residence, I was connecting the same way without any issues.
As an aside, there are 2 iPads, 2 iPhones and a MacBook Air all connecting to the same network without any issues whatsoever.
Info:
iMac, Mac OS X (10.6.8)
1. When closing the lid or pressing the power button the computer freezes, the fans start spinning fast it stays like that until it drains the battery. This happens every time.
2. Start-up times are very long, like 3 or 4 minutes. This also happens every time.
3. Now after a fresh snow leopard install it doesn't even start up completely, as it stays showing a light blue background and I can hear the music of the introductory animation.
4. Also, the keyboard is unresponsive at the login screen, but the mouse cursor moves and the display goes to sleep normally. Clicking anywhere with the mouse also produces no effect.
5. It seems to work OK in safe mode.
The macbook worked ok with the factory installed Tiger. The SL DVD is OK, as its installation has been tested on another Mac. The machine's advanced hardware test passed successfully. Resetting Pram and SMC did not solve the problem.
Can an unsaved pages document be retrieved after a screen freeze?
Info:iMac, Mac OS X (10.6.8)
Is there a free way to run/emulate OS X Snow Leopard while running Leopard?
I had a billion problems when I upgraded to Snow Leopard but some software that I don't use frequently only works with it so I want to be able to run those apps while still staying in my less buggy OS X Leopard.
I don't want to have dual boot operating systems. OS X Leopard 10.5 is my primary OS.
I've got a late 2006 MacBook Pro and installed the Wireless N enabler a while back. I've got Snow Leopard now, and the card still reads as N capable in both Network Utility and System Profiler. I've sometimes been able to connect at N speeds, but not always. For example, right now I'm on my office's wireless network. Another guy has a MacBook Pro (a year newer than mine so it shipped with N enabled), but I can only get 54 speeds, while he can get 130. Any ideas? Could it just be a router setting? I option+clicked on the AirPort menu item and took a screenshot. My coworker is also on Channel 6, at 2.4GHz
View 3 Replies View RelatedMy Macbook Pro has been running slow...I inherited it from another coworker (we are contractors so we are responsible for them not the company)...the spinning colorful ball icon seems to run on and off on different screens every day..what I can delete or programs to run?
Here is the Etre Report:
EtreCheck version: 1.9.15 (52)Report generated August 23, 2014 at 9:54:55 AM EDT Hardware Information: ? MacBook Pro (13-inch, Early 2011) (Verified) MacBook Pro - model: MacBookPro8,1 1 2.3 GHz Intel Core i5 CPU: 2 cores 4 GB RAM Video Information: ? Intel HD Graphics 3000 - VRAM: 384 MB Color LCD 1280 x 800 System Software: ? OS X 10.9.4 (13E28) - Uptime: 0 days 0:23:39
[Code]....
Info:
MacBook Pro (13-inch Late 2011), OS X Mavericks (10.9.4)
As all of you know, according to Apple, Snow Leopard runs only on Intel chips. Also, as a lot of you know, PPC and Intel versions of OS X report themselves as such, ie PPC 10.5, Intel 10.5 and so on...
Yesterday, as I was looking over my traffic logs, I found something quite interesting...
"PPC 10.6"
I got one visit right after the day of WWDC, and another visit just 2 days ago...
Someone just spoofing what their machine reports? Or someone running an an early internal build of SL during which time maybe they had multiple versions?
MDS is running at 97-100% CPU. What could be the causes?
running 10.6.8
$ ps auxww | grep mds
root 16182 97.8 8.6 3737612 362636 ?? Rs Tue06AM 179:03.22 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
I just opened up Activity Monitor to force quit an app, and to my surprise I have two processes that are running as 64-bit. I thought this was a Snow Leopard thing?
View 11 Replies View RelatedHow are iLife '09 and Snow Leopard running together? any problems?
View 14 Replies View RelatedThe title says it all. It seems like it's running a lot warmer compared to Leopard.
View 24 Replies View RelatedI have just upgraded to Snow Leopard and one of the questions I'm struggling to find an answer to, is just how much RAM can I put in my iMac? I'm running a 3.06GHz core 2 duo iMac, 2008 (last model, without the new fancy graphics card). And, it currently runs 4Gb of RAM. With all of the Snow Leopard talk of your system running a virtually infinite amount of RAM, how much can I run???
Am I limited in some way by the motherboard in my iMac? Or can I "fill my boots!!"?
I've attached a screenshot of my current system configuration.
I finally needed to use iDVD to make a DVD for family members of the pictures I took an my niece's wedding. I told my wife "Sure, no problem we can do that on my Mac..." [URL] I have spent the last two weekends, and most of last week trying to get iDVD to work. My poor MBP. I reinstalled, deleted plists files, rooted out every trace of the program, repaired permissions, reinstalled, updated, searched Apple's site for some clue, all with no joy...
The program will open, allow me to start a project, and then just disappear. If I try to exit, it comes back and asks if "I want to save the project," then the dreaded spinning beach ball. I have to force quit the program. On the other hand, if I go the Magic Disk route, it will let me assemble the project, but when I try to preview, or save the project, the program disappears completely. ARG, So frustrating!!!
[URL]
Today I was at least able to make a DVD to show proof of concept to my lovely wife...
It dawned on me that when I installed Snow Leopard, I did it on a minty fresh 500 gig hard drive. I still had the old Leopard 10.5 on the old disk I had in a USB external case, which I keep at work as a backup. (I recommend when a major upgrade happens to purchase two of the largest hard drives available at that time, using one for a time machine, and the other one to install the new OS on, keeping the old disk as a backup in case of disaster. Until now I have never Needed the old system...) Anyway I brought it home, plugged it into the MBP, and had no problem making the disk.
So, this leads me to the question, "Has anyone else had success-running iDVD 7.04 from iLife 08 in Snow Leopard 10.6.x?" If so, what hoops did you have to jump through to get it to work? It seems on the sites I looked at anyway that iDVD from iLife 09 is not much different, but I don't know anyone here in town who has it to test it out. I would love to be able to work from SL, rather than off my old backup.
It dawned on me that when I installed Snow Leopard, I did it on a minty fresh 500 gig hard drive. I still had the old Leopard 10.5 on the old disk I had in a USB external case, which I keep at work as a backup. (I recommend when a major upgrade happens to purchase two of the largest hard drives available at that time, using one for a time machine, and the other one to install the new OS on, keeping the old disk as a backup in case of disaster. Until now I have never Needed the old system...) Anyway I brought it home, plugged it into the MBP, and had no problem making the disk.
I've got a 750 GB RAID-1 array on my Snow Leopard Mac Pro that is running dangerously low on inodes. It only has 144,000 files on it but look what df -i claims: Filesystem 512-blocks Used Available Capacity iused ifree %iused Mounted on /dev/disk13 1464477312 1394933032 69544280 96% 174366627 8693035 95% /Volumes/RAID-1 750
It claims 174 MILLION inodes are used with only 8.6 million to go.
Will Snow Leopard automatically add more inodes?
I have an iMac running on 10.4.11. My question is Can I buy the snow leopard update or will I have to buy the 170 package? Also if I buy the update for my laptop will I be able to use the same disc on my iMac if I'm able to just use the upgrade?
View 3 Replies View Related
