OS X :: Won't Fix Snow Leopard Sleep Freeze / Slow And Showing Blue Screen
Jul 30, 2010
1. When closing the lid or pressing the power button the computer freezes, the fans start spinning fast it stays like that until it drains the battery. This happens every time.
2. Start-up times are very long, like 3 or 4 minutes. This also happens every time.
3. Now after a fresh snow leopard install it doesn't even start up completely, as it stays showing a light blue background and I can hear the music of the introductory animation.
4. Also, the keyboard is unresponsive at the login screen, but the mouse cursor moves and the display goes to sleep normally. Clicking anywhere with the mouse also produces no effect.
5. It seems to work OK in safe mode.
The macbook worked ok with the factory installed Tiger. The SL DVD is OK, as its installation has been tested on another Mac. The machine's advanced hardware test passed successfully. Resetting Pram and SMC did not solve the problem.
My iMac G5 (running 10.4.11) freezes at the blue screen, after recognizing the mouse, but before the login window. Some form of energy saver must be working because after the blue screen dims, moving the mouse will brighten it.
Steps I've taken: Hardware test - everything passed (RAM, logic board, airport, display, etc...) Zeroed the computer (7 times) and fresh reinstall
I CAN boot up in Safe Mode, Single User Mode, and Verbose mode. I can boot from CD, Knoppix CD, and into Target Disk mode (thank god for this MacBook I'm on now...)
Here's the system log (I've edited in comments and out personal info):
// reboot and power on
[SIZE="2"][FONT="Tahoma"]Jan 6 21:19:02 users-imac-g5 shutdown: reboot by user: Jan 6 21:19:02 users-imac-g5 SystemStarter[102]: authentication service (110) did not complete successfully
// gray apple screen with spinning progress bar
Jan 6 21:19:35 localhost kernel[0]: standard timeslicing quantum is 10000 us Jan 6 21:19:35 localhost kernel[0]: vm_page_bootstrap: 124630 free pages Jan 6 21:19:35 localhost mDNSResponder-107 (Mar 20 2005 20: 31:47)[38]: starting Jan 6 21:19:35 localhost kernel[0]: mig_table_max_displ = 70 Jan 6 21:19:35 localhost kernel[0]: 89 prelinked modules Jan 6 21:19:35 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993 Jan 6 21:19:35 localhost DirectoryService[36]: Launched version 1.8 (v346) Jan 6 21:19:35 localhost kernel[0]: The Regents of the University of California. All rights reserved.
since installing sl, my imac itself works fine however i am stuck with a solid blue wallpaper. everytime i try and change it, it goes back to blue screen within 30 seconds or so. not a crashing problem like others have faced, but annoying nonetheless. got to second level of apple support and still could not figure it out. anyone have any ideas?
I woke up this morning and my iMac G5 (w/ Leopard) was frozen. I restarted it manually, but it would freeze on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM - any other ideas?
What can I do in Safe Mode that might fix my comp? I haven't recently installed any applications, and I have all "open at login" items turned off.
I have a 2006 Mac Mini using Snow leopard OS X 10.6.8.It will start up to show the 2 User accounts that are set up however when one of the accounts is selected all that appears is a totally blue screen with only my mouse curser working on it. Is there a fix for this?
After upgrading from Leapard to Snow Leapard a few weeks ago on my macbook there has been a blue screen flashing before the login screen. Is this normal? Or am I being peranoid? could it be that i installed app cleaner? I unistalled app cleaner and it still did the same.
I am on a brand new 3.06 GHz iMac. Installed Snow Leopard, 10.6.1. In general I don't experience any of the problems other people seem to have. But twice now my screen has turned blue while I am in the middle of something. All the open apps disappear and the Finder seems to relaunch. It only takes a few seconds. I don't have steps to reproduce it. Both times I had several apps open and had video/DVD running in the background.
Has anybody seen this?
I am a notorious file-saver which means I haven't lost much work through this but if it keeps happening I might have to go back to Leopard.
I installed snow leopard on my iMac. Everything seemed to go ok. It took about 45 minutes to install and it restarted but now it sits on a blue screen. What gives?
I upgraded from Leopard to Snow Leopard and I wanted to restore my computer so I found directions that said I should put the snow leopard disk back in the computer and restart it. Well, I did that and now all I have is a blue screen. What do I do!?!? I've tried manually turning it on/off and it will turn off, but still goes back to blue screen with nothing on it.
Info: MacBook Pro (13-inch Mid 2010), Mac OS X (10.6)
Whenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem? I tried booting from the installation disk and repairing disk with "disk utility" but to no avail. Have also tried repairing disk permissions... Any idea how else should i tackle this problem?  Currently i can only switch off my MBP by holding the power button (forcing it to shut down).
Info: MacBook Pro, Mac OS X (10.6.8), 15 inch 2.0 GHZ
Over the past month I have encountered a number of bugs with Snow Leopard on my MacBook Pro (mid 2006). Ever once in a while, usually during high performance task (like watching flash or encoding with handbrake) the temperature of my cpu will spike to 85-90 degrees celsius and then the system freezes.
During this freeze, I can still move my mouse, but I am unable to click on anything on the dock or any program. Moving the mouse over the dock does not invoke the magnification either. I have to do a hard reset to fix the problem.
Also every once in a while, a long blue horizontal line will appear in on the screen. (sometimes their in iChat windows, sometimes safari, and sometimes the desktop as shown in the photo).
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
I have an iMac 21inch, Late 2009. I found after it was runing really slow that my hard drive was failing. It told me there were SMART errors on the drive. The computer is out of warranty and I'm in the middle of no where so i have no Mac store to take it to. I bought a new drive, same model, and installed it into the computer. It turns on fine, but after the Apple logo and spinning coge wheel the screen flashes, shows the blue back ground like its going to load the desktop and then goes black.Â
I've tried connecting an external monitor to it and shows up like an extended display. I've tried connecting it to another Mac, a Mini, and the Mini can boot off the iMacs hard drive just fine. If it Target Disk mode the Mini and boot the iMac I get the same flash of blue desktop then it goes black. Â
This is where it gets weird though, I'm sure your thinking, ok the screen is going bad... BUT, I boot off an Ubuntu CD, or the AHT disk and it loads fine and has no turning black. Its only when booting into the Mac OS or the installation disk. Â
One last note is that when its at the black screen and I'm sure its loaded the desktop, if I hold the power button down for about 3-4 seconds, till I hear a click. I then press the button again right away and the screen flashes on showing me the desktop and everything, for about 2 seconds... Â
I recently got the Core i5 iMac. Basically, while I'm working doing everyday things like browsing, coding, iMovie etc...my screen just freezes and there are squares of white noise pixels scattered everywhere. I can see the mouse cursor as I move but the image is so distorted that I dont know what Im clicking. Restarting the machine fixes the problem.
I made a youtube video so you guys could see what I'm talking about here: http://www.youtube.com/watch?v=sVHCn9VSyIA
I upgraded to Snow Leopard and a few days later when i went to shutdown my mac pro after i woke it up, i got the blue screen and progress wheel just spinning. After calls with Apple, running both long and short hardware tests, 3 snow leopard discs, a clean install, 2 upgrades, the tech gave up. The clean install was a bare bones install with no applications installed. I would now have to take it into a repair shop and pay for software tests. This is a one year old mac pro with apple care. I used Time Machine to restore to leopard, and all is ok. Has anyone heard of this problem? I'm quit happy to stick with Leopard, but am upset that an apple software problem has to be fixed and paid for by me. I assume if it was a hardware problem it would show up in Leopard.
macbook pro blue screen with spinning disk, won't start up. my macbook was really sluggish so i ran a hardware test. it said NO PROBLEMS. i did restart. my current login and password were REJECTED. then the macbook went into blue screen and it just sits there and flashes to gray and back to blue and the white lines that make up the circle icon just spin and spin.
Finder will flick to blue screen for a split second and restart quitting all open apps. Not restarting the iMac, but just Finder? I've ran Disk Utility and found no problems and also ran a Hardware Test and found no problems. The only indication I have is in Console which without posting the whole log the below lines stand out to me as potential issues:
HIToolbox: received notification of WindowServer event port death. This line is present numerous times with each application name that was open next to it indicating to me a reason each app has quit? Then a long list of this line repeated; com.apple.fontd [58544] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0) Followed by: com.apple.WindowServer[58526] WindowServer[58526] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
This happened once yesterday and a few times today so it's becoming more regular...
MacBook Pro laptop with a model number of 10.5.8 doesn't turn on properly. When it turns on there is only a blue screen with a folder and a question mark on it. How to troubleshoot my laptop.
I frequently get a blue screen of death after waking from sleep. I have to restart the computer to resolve the issue. This problem only began about a week ago, long after I updated to 10.7.4 on my iMac.
At first i get the white apple logo en the round indicator and then the screen turns blue/turcuse and it takes aprox 10min before i see the desktop. Its fast but not very fast to boot into safemode. When the computer is all booted up everything work great!Â
Ive tried to reinstall Snow Lion after i formated the drive but without any luck. Ive resetted SMC and PRAM. The superdrive has stopped work to, when i insert a disk i spinnsup for a min or a half then it ejects the disc.
I installed snow leopard now thru a external dvd via usb. AND! I almost forgot, the computer doesent get out of sleepmode after i closed the lid, Â
Info: MacBook (13-inch Late 2007), Mac OS X (10.6.8)
I dont know whats going on but suddenly all my "third party applications"( not included in iLife) started to freeze after I open them. (Keynote, Pages, Skype, MSN Messenger, just to name a few). I have to force quit them.
I recently had my screen replaced because of a crack. Now I find when I open the laptop to use, after being on sleep mode. It momentarily turns blue, sort of flashes/glitches then works normally. Should I be concerned?
It seems that prior updates worked. However, when I update to 10.6.8 my system will freeze. The only that that moves is my cursor.I can be on the web, scrolling. It will happem when new email is being down loaded. I can be working on th PC side and will experence it. I ran the "Disk" repair. But even after the run is done the system will work for a short while and the freeze. Now I can reinstall 10.5 "Snow Lepoard" and not update to the latest "Package" update and all works well. So the main question is "What gives?". Its very troublesome. Is there any soulition to this?
