why I get this message when trying to burn photos on to high quality discs."The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry." I have just managed to burn some others photos perfectly fine.
Info:
iPhoto '11, Mac OS X (10.7.4)
Error: The burn to the OPTIARC DVD RW AD-5690H drive failed. The disc drive did not respond enquiry.c and can not recover or retry.
View 3 Replies View RelatedMy iMac is making the most terrible noise when burning a disc, and after two or three tracks are burnt it gives me an error message and then will not burn anymore?
Info:
iMac, Mac OS X (10.6.8)
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error."What does this mean and how do I fix it?
Info:
iMac, Mac OS X (10.6.7), With Snow Leopard
My Macbook keeps saying 'The burn to the MATSHITA DVD-R UJ-898 drive failed. The burn failed because of a medium write error.' everytime I try to burn a cd with data on it, it has only just started doing it after 2 years of use, how do I fix it?
Info:
MacBook
I keep getting error 0x 80020022 "communication to disc drive failed"no matter what i try burning. Firmware is up to date, and I'm using hi-quality discs. It's holding up my livelyhood
Information:
g5 dual 2.5
Mac OS X (10.4.9)
6 gig RAM, ATI 9600 card
I tried to burn 1.4GB of data on a 4.7GB blank DVD using Finder but got an error message saying "file is too large to fit on the disc. Remove some files an try again". I'm on Mac OS X 10.6.8.Â
Info:
iMac, Mac OS X (10.6.7)
I think my superdrive died in my dual-core PM G5. This is what it's doing: I'll insert a DVD and it'll sit for a few seconds, then eject it. It DOES show up in my system profiler though. Is it dead, or is this a software problem? Oh- I should mention that the last thing I did was use Visual Hub to burn an AVI to a DVD. That worked fine. Afterward- nothing. I'm running OS 10.4.9. Help!
View 4 Replies View RelatedIm using a 17" unibody macbookpro 2.66 early 09 to make a copy of my Leopard Disc to put in an offsite storage location.
Im able to rip movies and burn movies (DVD-R, DVD-RW, DVD-DL), iMovie videos, iTunes cds, rip audio discs, etc.
The media is Dual-Layer DVD-R in disk utility
I burn it at the slowest possible speed (on both systems) at 2.4x
After it writes the data to the disc and finishes, i get this lovely image:
I tried doing a test install of it from the burned dvd and it installed fine.... = what the huh!?
its done this twice.
using the same media on a 15" 2.2ghz uMBP late 2008 gives me a completed successfully notification every-time.
burn info:
17" Superdrive info:
HL-DT-ST DVDRW GS21N:
Model: HL-DT-ST DVDRW GS21N
Revision: SA17
Serial Number: KZZ91OM5217
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
15" Superdrive info:
MATSHITADVD-R UJ-868:
Model: MATSHITADVD-R UJ-868
Revision: KA14
Serial Number: dE0E4283
Native Command Queuing: No
Detachable Drive: No
Power Off: Yes
Async Notification: No
Log Files from the 17" uMBP
Here are the Disk Utility Logs
Quote:
2009-08-23 15:19:30 -0700:
2009-08-23 15:50:48 -0700: Eject of �disk2s3� succeeded
2009-08-23 15:50:51 -0700: Burning Image �Mac OS X Install DVD.dmg�
2009-08-23 15:51:02 -0700: Image name: �Mac OS X Install DVD.dmg�
2009-08-23 15:51:02 -0700: Burn disc in: �HL-DT-ST DVDRW GS21N�
2009-08-23 15:51:02 -0700: Erase disc before burning: No
2009-08-23 15:51:02 -0700: Leave disc appendable: No
2009-08-23 15:51:02 -0700: Verify burned data after burning: Yes
2009-08-23 15:51:02 -0700: Eject disc after burning
2009-08-23 15:51:02 -0700:
2009-08-23 15:51:02 -0700: expected CRC32 $0F91EA17
2009-08-23 15:51:02 -0700: Preparing data for burn
2009-08-23 15:52:25 -0700: Opening session
2009-08-23 15:52:31 -0700: Opening track
2009-08-23 15:52:31 -0700: Writing track
2009-08-23 16:11:26 -0700: Finishing burn
2009-08-23 16:12:26 -0700: Closing session
2009-08-23 16:12:28 -0700: Finishing burn
2009-08-23 16:14:05 -0700: Burn failed
2009-08-23 16:14:05 -0700: The device failed to respond properly, unable to recover or retry.
2009-08-23 16:14:16 -0700: Unable to burn �Mac OS X Install DVD.dmg�. (The device failed to respond properly, unable to recover or retry.)
2009-08-23 16:21:59 -0700: Attach Image �Mac OS X Install DVD.dmg�
2009-08-23 16:21:59 -0700: Initializing�
2009-08-23 16:22:00 -0700: Verifying�
2009-08-23 16:22:00 -0700: Verification completed�
2009-08-23 16:22:00 -0700: expected CRC32 $0F91EA17
2009-08-23 16:22:00 -0700: Attaching�
2009-08-23 16:22:00 -0700: Checking volumes�
2009-08-23 16:22:01 -0700: Operation canceled by user.
2009-08-23 16:22:02 -0700: Volume check completed�
2009-08-23 16:22:02 -0700: Mounting�
2009-08-23 16:22:02 -0700: Finishing�
2009-08-23 16:22:03 -0700: Finishing�
2009-08-23 16:22:03 -0700: Image �Mac OS X Install DVD.dmg� attached successfully.
**********
Here is from ~/Library/Logs/DiscRecording.log
Quote:
Disk Utility: Burn started, Sun Aug 23 14:57:02 2009
Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI.
Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Sun Aug 23 15:19:01 2009
Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
Disk Utility: Burn started, Sun Aug 23 15:51:02 2009
Disk Utility: Burning to DVD+R DL (RICOHJPN D01) media with DAO strategy in HL-DT-ST DVDRW GS21N SA17 via ATAPI.
Disk Utility: Requested burn speed was 2x, actual burn speed is 2.4x.
Disk Utility: Burn failed, Sun Aug 23 16:13:34 2009
Disk Utility: Burn sense: 4/09/02 Hardware Error, Focus servo failure
Disk Utility: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.
i can't insert any disc in my disc drive slot something is blocking insideside
View 9 Replies View RelatedI have a disc full of photo's stuck in the disc drive on my imac. When I try to eject it, I get a spinning rainbow circle and have to do a hard shut down. It sounds like it is trying to eject it, but then gets hung up.
Info:
iMac, iOS 5.1
Everytime I try to burn a disc, I keep getting the message "The attempt to burn a CD failed.The burn failed because of a medium write error".
Info:
MacBook, Mac OS X (10.5.8)
I've been having a connection issue for a while where some days I can connect to our networked drive just fine and some days it fails and gives me the connection failed window.The shared drive is hard connected to an imac and I connect to it via the shared items or apple + k with the ip address. When the connection fails they both stop working.
Info:iMac (20-inch Early 2008), Mac OS X (10.6.8)
Why isn't my disk ejecting properly? I can't eject it on iMac. What should I do?
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
It no longer shows up in the list like the other one in the double enclosure does. I can see it with DU but cannot verify or repair b/c choices are grayed out. Smart says it is read only. How do I get data off of it, as it seems to be on its last leg?
Info:iMac, Mac OS X (10.6.6), 2.4 late 2008
I have an iMac made in mid 2007. It is an Intel Duo Core processor. The hard drive has failed. Apple says I can use an external drive to run it. I have a installation disk for Snow Leopard. How can I install Snow Leopard onto the external disk given that the computer is unusable?
Info:
iMac, Mac OS X (10.7.4)
I am working on a Mac book Pro and I have been getting a message that my disc drive is full. How do I clear some space? I'm running OS X v 10.9.5
Info:
MacBook Pro, OS X Mavericks (10.9.5)
So All of a sudden my superdrive wont burn dvd's or cd's. It says open session, and then immediately says close session. I tried using the Toast software and it did the same thing. i think about replacing the drive?
Info:
iMac, Mac OS X (10.7.4), Late 06 17in
When I insert a CD or DVD into my iMAC superdrive it is recognised and will play but then it is not displayed in the finder sidebar. consequently I cannot eject the disc. The only way to eject is to restart the machine.
Info:
iMac, Mac OS X (10.7.4)
[code]...
Macintosh HD Boot Mode:
Normal When I insert a DVD or high capacity disc, I can hear it spinning and reading and then eventually ejects the disc. I never get any indication that the computer has read the CD/DVD. No Disc icon ever shows up on the desktop.
Info:iMac (21.5-inch Late 2009), Mac OS X (10.6.8) Boot ROM Version
I am having trouble burning a disc of a slide show to be used on a windows PC. I haves managed to burn one which operates ok on the mac but cannot fathom out how to do one for a PC
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.3)
So my regular cd-rom/burner died immediately after my warranty was up, so I went on ebay about bought this $65 superdrive:
http://cgi.ebay.com/ws/eBayISAPI.dll...lenotsupported
I took my macbook apart, managed to crack the keyboard in the process (tack on another $50), and eventually swapped out the drive. Before I reassembled everything I booted it up and the drive took my cd and played it on itunes. So, I put it all back together, every little friggin screw, except like 4 and now the drive won't respond. I can hear it spinning when it boots, but when I log in there's nothing. There's a cd in it, and I can't eject it. When I hit eject, nothing happens, not even the little graphic that appears on the screen. I know its still connected because I hear it spin on start up.
I recently had to reinstall iTunes with help from tech support after it kept crashing and now my disc drive is ejecting any disc that I put into it.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.6.8)
I have recently started working from home on my mac - in the last 2 weeks 30gb of space has dissappeared off my hard drive - i cant find it
Info:
iMac (24-inch Early 2008)
I am using a PC keyboard on my MAC for work purposes. The F9 and F10 key do not respond properly. They just move the program to the foreground.
Info:
G5, Mac OS X (10.5.1)
I've got a PowerPC G5 running 10.4. After four years of dedicated service, my Superdrive gave out, so I bought a Sony drive (SONY DVD RW DRU-842A in profiler) to replace it. Here's the trouble:
Any time the machine goes to sleep with a disc in the drive, it won't eject when I wake it up. I have to restart, then eject. Other than that, the drive works beautifully. If this question has been answered elsewhere, please redirect me there, sorry for the repost.
Speaking of sleep, when I put the machine to sleep through the menu it goes fully to sleep (no fan/other noise). But when it goes to sleep on its own, I can still hear the machine churning away. Any ideas? My roomate has a newer Mac Pro that doesn't do this.
how do you burn a disc on macbook pro 10.7 Lion OS?
Info:MacBookPro, Mac OS X (10.7.4)
I think I have tried everything?? I still can not burn my playlist to a disc. I have tried different burn speeds, different brands of disc's etc.
Info:
iMac, OS X Mavericks (10.9.2)
So my brother was upgrading to Snow Leopard from Leopard tonight...and during the install, the time remaining went negative, then shortly thereafter everything froze up so he was forced to power down and since then nothing has been right. He can't restore from backup because apparently there isn't enough space on the disk, then we tried to repair persmissions, it says it cannot and to reformat hard drive...so we do that, reboot and then try to re-install leopard only for now, and when it comes up to choose a destination drive he is just a blank box, his hard drive doesn't show up!
View 2 Replies View RelatedMy disc drive worked then all of a sudden it stop it takes the disc and then makes a noise then stops then ejects it.
Info:
iMac, OS X Mountain Lion (10.8.3)
