When I hold down Option on boot up, it loads to a grey screen with a dark grey padlock. Under that is a password entry field then a dark-grey circle with a right pointing arrow. I've tried every password I can think of but it does nothing. When I click enter the password just dissapears.
Info:iMac, Mac OS X (10.7.3)
How can I start my imac and bypass the screenlock?
Info:
iMac (21.5-inch Mid 2010)
I have a mid-2007 model and I replaced the x2 stock 1GB sticks with x2 2GB sticks. I followed the correct procedures, (I think), and when I powered it on the fan came back on but the screen was black. I unplugged the unit and replaced put the old RAM back in and now when I power it up the screen just goes grey and beeps when I turn it on.
Info:
Mac OS X (10.6.8)
I just installed OS X 10.6 and now when i try to turn on my computer, i get this grey screen with computer code on it and the black box that says to restart my computer. I tried safe boot along with all the other steps on the page for the grey screen but nothing works.
Info:
iMac, Mac OS X (10.6)
My macbook won't show the screen where you hold down the option key and it won't show the apple logo or the spinning gear just a blank white screen when I turn it on. I replaced the old hard drive with a brand new 500 gb 2.5 inch data hard drive.I also purchased a brand new copy of OS X 10.6 Snow Leopard.when I put the disc in and power it on holding the option key nothing happens just a white screen with no apple logo or spinning gear.
Info:
MacBook, Mac OS X (10.6)
My iMAC is stuck on blank grey screen at startup. Keyboard is not active, won't function at all.
View 1 Replies View RelatedI Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
Is there any way to disable the ability to open the Startup Manager by pressing the option key?
Info:
iMac
Last week I finally upgraded from 10.6 to 10.7, but now my Mac Pro (2008) won't boot properly. It'll start to boot with the gray screen and the Apple logo, but then the entire screen goes gray and it just locks up there.  However, if I reboot and hold down the Option key to bring up the list of bootable drives that works fine. I've checked my Startup Drive settings and the proper drive is selected. why it won't boot on it's own anymore? Holding down the Option key is getting old.Â
Info:
Mac Pro - Octo Core, Mac OS X (10.5.6)
My Mac Pro (early 2008) has a strange issue. It won't get past the grey screen (before the Apple) unless I hold the Option key, and choose the Boot disk manually.
* it only happens after a shutdown
* restart it starts fine
* nothing in console suggests weirdness (although of course it doesn't get this far anyway at boot)
I've tried the usual: zap PRAM, permissions etc. I do have Apple care for another few months but cannot afford the time without my computer at this point.
could one of you please tell me how to solve my problem?
when i power my macbook on, in login window,there'are empty Username and Password which is i have to fill. when i type my username and password , i can't access small letter which i used exactly when i set U n Password the first time i used my mac (eg.. username-dearmac, pw - loveyou).
my mac show only Cap Letter (DEARMAC...)... is it normal?
isn't supposed to be able to acces Small Letter as well. if so ... how can access that?
i turned off Caps Lock already. playing Caps Lock doesn't make any changes. it's always come out with Cap Letter....
This has just started happening a few days ago. I think it has something to do with bluetooth. Every time I have to restart my iMac, the mouse and keyboard freeze. I work around this by unplugging the mouse from the keyboard and plugging it into one of the usb ports on the back of the imac. I used to have a wireless keyboard and mouse and I'm typing on it now because the regular wired keyboard no longer seems to work at all now. I think the bluetooth setting sin system preferences which are all checked, may have something to do with this but not sure. Everything else on the machijne is fine. How can I set things so that I can use my wired keyboard?
View 1 Replies View RelatedCan a bad video card make a Mac Pro stall out at the grey screen, spinning ball, but yet able to boot in safe mode?
Info:
Mac Pro, Mac OS X (10.6.8)
i just updated efi firmware on my macbook pro (late 2011).. and my mbp always starts with a grey screen (not white screen anymore) and the apple logo with a status wheel evertime i turn it on.
Info:
MacBook Pro, Mac OS X (10.7.3)
I cannot start up my Mac Pro 2008 without holding down the Option key.My Snow Leopard internal hard drive failed, so I replaced my failed internal drive with a brand new one and put the cloned backup onto it. I also have other internal drives and partitions with systems 10.5.6, 10.7.5, and 10.8.4. I briefly added a Mavericks partition, but removed it.Â
I THINK the problems started after the HD failure, but I'm not sure. I added no peripherals recently, although I did add 4 gigs of RAM which were faulty and I had to replace them. But they test fine with a memory test. If I Restart, the Mac comes up with a grey screen and won't boot into any system.
If I Shut down, then Start up, I get the gray screen. In System Preferences, I can see every single possible Startup Drive, but no matter which one I select, the same gray screen happens on boot up. However, if I hold down the Option key (from startup or restart), then I can choose any startup volume and it starts just fine.Â
I've run Disk Utility many times for Repair Disk and Repair Disk Permissions on every volume. I've run Disk Warrior. I've zapped the SMC/PRAM, etc. I've tried starting up from external firewire drives and USB drives. No matter which drive I select in StartUp Disk Preferences, it's the same grey screen. I've tried starting up with ZERO peripherals attached except for USB keyboard and mouse. I've taken out all startup and login items. I don't mind using the Option key every time, but I'm worried it's a sign of impending problems.Â
Info:
Mac Pro, Mac OS X (10.7.5), Early 2008, Radeon 5770,
I am having trouble with my macbook: It wont load past the Grey apple start up screen with the spining gears, iv done Zapp on the PRAM, iv run ""/sbin/fsck -fy"". And I am now starting in Verbose mode, but its taking AGES, it must be loading for an hour now, its showing "Neb-computer /System/library/coreservices/loginwindow.app/contenst/MacOS/loginwindow: Login window Application started (Over and over and over again). I don't have an install disk.
View 1 Replies View RelatedMy screen has gone to a very dark grey on startup. I can faintly make out the desktop icons, but it is about 98% black. Everything else seems to be fuctioning. iMac G417" Flat Panel 17" [Pixar-lamp style] OS 10.4
View 4 Replies View RelatedI have a Mac Pro that is stuck at the grey startup screen. Grey apple, spinning wheel. I let it spin for about half an hour and then went on to try other things. Every attempt still leaves me stuck at the spinning grey wheel.
Info:various, Mac OS X (10.5.6)
I sure hope your day is faring better than mine...To try and make my new issue easier to follow and to save face as I feel like an idiot, permit me to explain in bullet format:
First things first: I was running 10.6.8 SL on my 2006/7 model MacBook pro 15.4 w 2 gig sdram, right now I'm running nothing. When I turn on Mac it goes to grey screen and I see a folder/?/apple symbols rapidly interchanging on screen. This occurred after trying to use TM for my first time as I deleted some items I shouldn't have. In time machine all seemed kosher until the first attempt said not enough space on hd so I decided to only click on sys folder in TM. this was where prefs and files were accidentally deleted from after all. The kicker is my Mac still functioned I just noticed my HD no longer had a name, and a few other issues were happening, but I could access and open files, go online, etc... Post time machine none of that was possible! I tried first putting SL disk in but wouldn't read it, so tried restarting w disk in drive. HUGE ERROR on my part. This is where the grey screen desc above took its place. I looked on iPhone and have followed all available suggestions but have come to realize at some point I must have in error created a firmware Pw. I tried entering it but the lock simply stays put (when I attempted one of many fixes to my problem listed online). So now I'm left not knowing if whatever happened messed w my firmware pw or if I somehow chose something diff as pw but I highly doubt that. In any case, I have all of my life locked into a useless box now and I had thought this is why I bought external and used time machine. I've come to loathe TM. it's not as simple as I had thought otherwise none of this dshould have occurred. Does anyone have any ideas as to how I reset or altogether delete firmware pw, and best way to reinstall.
Info:MacBookPro, Mac OS X (10.6.8), 2.16 GHz Intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM
My iMac will chime, then hang on the grey apple screen with the spinning gear. After a few minutes, it shuts off. Tried resetting Pram and all... Did not work. I troubleshooted using another website, and found it to be an I/O Error. The issue is I need to reinstall the OS, however, when I boot the install CD it hangs the minute I click the mouse or keyboard.
View 8 Replies View RelatedWent to the Apple store, explained my problem and they brought out a new iMac for me. Did a retail swap instead of going through the Genuis Bar. I'm so happy =) =) Got a brand new iMac. This time, I disk Disk Check right away, and it says hard drive appears to be OK. No grey progress bar anymore! The problem was probably b/c the hard drive was defective. It had nothing to do with the unsafe shutdown, or pressing shift, etc...
I have a iMac 27'.. Purchased it 2 weeks ago.
I think I did an unsafe shutdown.. Or I pressed "shift" while booting, or something.. Idk and I also have WinXP installed on BootCamp. However for some reason now every time I startup my Mac, it loads with the grey Apple horizontal progress bar with a little loading animation on top. It's so annoying. This didn't happen after no firmware upgrade or anything. And I don't have any extra hard drives attached. Nothing. Everything is fine. Everything used to work. Even with BootCamp before. I think this happened after an unsafe shutdown or something. And also, my Mac has over 500GB free space still, so that's not an issue.
The progress bar at startup Takes 5-6 min extra to boot up. After it, the Mac OS X loads and everything is fine but that's not what my problem is. My problem is why should I be getting the stupid progress bar EVERYTHING I load my Mac?
I tried booting with installation disk, then going to Disk Utility but NOTHING. I click repair, and after 5 mins some error pops up saying backup your files when you can then reformat the disk.
Oh btw, Anytime I click Repair Disk it goes, then says: Updating boot support partitions for the volume as required. And after that it says: "Disk Utility stopped repairing "MY DISK NAME HERE". Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backend-up files.
Maybe the hard drive is damaged or defective.
my iMac doesn't startup, it stops in the grey apple and the spinning gear !!!
Info:
iMac, Mac OS X (10.6.8)
Today when I turned on my MacBook Pro (Mid 2010 model) , the apple logo appeared as normal, but then the spinning gear and a progress bar appeared under it. Now everytime in turn my computer on, this progress bar will appear, get to about the 2/3 mark and then the computer will abruptly turn off. I have read articles about this saying that I have to format my hard drive. I want to know if there is a way to fix this problem with out having to format my hard drive.
Info:MacBookPro, Mac OS X (10.7.3)
MacBook 10.6.8 startup goes to grey screen with apple, wheel and progress bar, and takes 5 minutes. This started only recently. What might be wrong?
View 1 Replies View RelatedEver since I downloaded 10.7.4, a blank grey screen appears at startup. If I click on the mouse, a white square cursor appears which I can drag around and `uncover` a place to input password. Then the galaxy image appears, and I have to input password again.
Info:imac, Mac OS X (10.5.1)
My MacBook Pro shows a grey screen when I try to login and won't go onto my homepage. Why has this happened and how do I fix it?
Info:
MacBook Pro, iOS 7.1.2
How many photo's can iMac with 4GB of space? Im really big into photography and need a lot of space!
Info:
iMac, iOS 5.1.1
So I bought a "new" PowerMac G4. I have two already.
The guy said it was running os 9 but now it wouldn't boot. I figured it needed an OS and the guy was wrong. I try to boot it up...
flashing ? folder
So I go thru all hell trying to install os x and what not.
It won't boot to the install CD. I finally got it to boot from my other Powermac's HD with OS X on it, but I can't seem to install OS X on this other HD, but that's not really what I'm asking here...
When I startup the PM and hold Option, nothing happens with either HD installed!!! No boot menu comes up.
Also when I hold down C, nothing happens at least nothing different. It doesn't boot to the CD.
Why is this?
Sometimes it seems to boot to my HD OS X and sometimes it boots to the CD on it's own. I can't choose what I want it to boot to unless I start the OS X and select it from there.
i just bought an early 2010 Macbook running OsX 10.6.8, all updates have been done. I cant seem to start file sharing, in the preferences window>sharing the window stays blanc. Also i noticed that the icon of sharing looks the same as the general preferences icon, normally this is a folder with a yellow mark on it.
Info:
MacBook, Mac OS X (10.6.8), early 2010 edition
I have a mac pro running 10.6.6. Occaisionally startup gets stuck at a grey screen and requires a hard reboot or two. I've not found any correlation between what is plugged into the mac or not plugged in and the successful or unsuccessful startup. It just appears random. I've begun studying the console for anything that might indicate what's going on when this happens. One thing I notice is the following line: 2/2/12 8:37:31 AMcom.apple.launchd.peruser.501[134](com.apple.FolderActions.folders) Path monitoring failed on "/Volumes/LittleWet_02/SFX_aiff": No such file or directoryÂ
This line was the last line in the console before the hard reboot a few times, suggesting it might be the culprit. The volume it is looking for is an external HD that was connected to this computer once almost a year ago and never again. I can't determine what startup process is looking for that SFX_aiff directory, or why. Is there any way to tell this system to cease looking for that volume upon startup? Â
Info:
Mac Pro, Mac OS X (10.6.6)
