i just bought an early 2010 Macbook running OsX 10.6.8, all updates have been done. I cant seem to start file sharing, in the preferences window>sharing the window stays blanc. Also i noticed that the icon of sharing looks the same as the general preferences icon, normally this is a folder with a yellow mark on it.
Info:
MacBook, Mac OS X (10.6.8), early 2010 edition
Want to use CD sharing on my MacBook Air. In System Panel "sharing" the option CD/DVD is not listed, so can't activate the option. How to get this option in "sharing"?
Info:
MacBook Air, Mac OS X (10.7.3)
I have a 13 inch aluminum late 2008 MacBook. The processor is 2 GHz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3 running OS X Lion 10.7.4. I am in the process of replacing my old hard drive with a new one.
My old hard drive is partitioned as follows:
Name: Macintosh HD
Format: Mac OS Extended (journaled)
Size: 132.5 GB
Name: BootCamp
Format: Windows NT File System (NTFS)
Size: 26.69 GB
When I was partitioning the new drive I did so as follows:
Name: Macintosh HD
Format: Mac OS Extended (Journaled)
Size: 973.51 GB
Name: BootCamp
Format: MS-DOS (FAT) --- This was the only option that I was given that I thought would work. I did not have the option of "Windows NT File System (NTFS) to choose from. I only run 1 program on Windows and that is the only reason I have BootCamp on there at all. However, I do HAVE to have that program. Size: 26.34 GB (I just used the same size that was current, or close to it.)
I connected the new Western Digital 1 TB through an external device, partitioned it as stated above, and then used Carbon Copy Cloner to clone the drives. It went through fine. (It took 2 hours and I went to bed before it finished.) This morning I woke to see that it had gone through well. I then started the process with the BootCamp drives.
However, before I started it gave me errors stating that I wouldn't be able to run Windows off of the Cloned BootCamp drive. So I used Winclone and it seemed to work fine. I then replaced the old drive with the new one. Then I rebooted the machine. Everything seems to be fine except when I went to restart it in Windows using BootCamp that was not an option. The only start up disks listed are the Macintosh HD.
Info:
MacBook (13-inch Aluminum Late 2008), Mac OS X (10.7.3)
When I try turning the computer on, I get the option to choose the startup disk, but only Recovery is visible. When i check in Recovery, it still shows my original start up disk, but I cannot restart off that. What do I do?
Info:
MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.3)
I am trying to figure out what the best option is for remote controlling my computer. I've used LogMeIn Free, which is a great option, and I really like that I can use any web browser from any computer, and even my iPhone to remotely control my primary desktop computer.
I've also used Mac's built in ScreenSharing.app to access my various computers using the Back To My Mac, which is also a great option.
I guess I would just like to find out if any better options exist. I do not like that the Mac's built in ScreenSharing.app doesn't permit me to view my remote desktop "Full Screen".
I do not like that LogMeIn seems like little more than a PC ported application made to work with a Mac as an after thought.
I am trying to use the Internet Sharing Option on my Macbook Pro. But when I go to System Preferences>>Internet Sharing, I see that the internet sharing option is greyed out and is not editable, I mean I am not able to select it or make any changes to it.
View 1 Replies View RelatedI cannot start up my Mac Pro 2008 without holding down the Option key.My Snow Leopard internal hard drive failed, so I replaced my failed internal drive with a brand new one and put the cloned backup onto it. I also have other internal drives and partitions with systems 10.5.6, 10.7.5, and 10.8.4. I briefly added a Mavericks partition, but removed it.Â
I THINK the problems started after the HD failure, but I'm not sure. I added no peripherals recently, although I did add 4 gigs of RAM which were faulty and I had to replace them. But they test fine with a memory test. If I Restart, the Mac comes up with a grey screen and won't boot into any system.
If I Shut down, then Start up, I get the gray screen. In System Preferences, I can see every single possible Startup Drive, but no matter which one I select, the same gray screen happens on boot up. However, if I hold down the Option key (from startup or restart), then I can choose any startup volume and it starts just fine.Â
I've run Disk Utility many times for Repair Disk and Repair Disk Permissions on every volume. I've run Disk Warrior. I've zapped the SMC/PRAM, etc. I've tried starting up from external firewire drives and USB drives. No matter which drive I select in StartUp Disk Preferences, it's the same grey screen. I've tried starting up with ZERO peripherals attached except for USB keyboard and mouse. I've taken out all startup and login items. I don't mind using the Option key every time, but I'm worried it's a sign of impending problems.Â
Info:
Mac Pro, Mac OS X (10.7.5), Early 2008, Radeon 5770,
So I bought a "new" PowerMac G4. I have two already.
The guy said it was running os 9 but now it wouldn't boot. I figured it needed an OS and the guy was wrong. I try to boot it up...
flashing ? folder
So I go thru all hell trying to install os x and what not.
It won't boot to the install CD. I finally got it to boot from my other Powermac's HD with OS X on it, but I can't seem to install OS X on this other HD, but that's not really what I'm asking here...
When I startup the PM and hold Option, nothing happens with either HD installed!!! No boot menu comes up.
Also when I hold down C, nothing happens at least nothing different. It doesn't boot to the CD.
Why is this?
Sometimes it seems to boot to my HD OS X and sometimes it boots to the CD on it's own. I can't choose what I want it to boot to unless I start the OS X and select it from there.
I believe the Macs at my college allow the user to select from either Mac OSX or Windows at startup. However, it's a little different than holding down the option key at startup. I think it shows both at startup by default and if none is chosen, Mac will boot automatically within a couple of seconds.
View 4 Replies View RelatedI have previously set my mac so a login name and password are required on start up. I have just done this on my new mac, but for some reason it is not appearing at start up.
View 4 Replies View RelatedI partitioned my MacPro HD to use Mac OS 10.7.4 and Windows Vista. All of a sudden holding down the Option key at start up no longer gives the optional start up systems for selection. How do I g et that function back?
Info:
G4, Mac OS X (10.3.x)
Was trying to install Windows XP through BootCamp. The installation did not go through, and I quit it. After I tried to restart the computer however, it kept going to a black screen with a blinking _ on top.
I restarted, pressing the "option" key and the only partition that shows up there is one for Windows. I can't see one labeled "Mac" or something like it anywhere. I tried using the Repair Disk Utility but it won't actually give me the option to repair ir.
When I hold down Option on boot up, it loads to a grey screen with a dark grey padlock. Under that is a password entry field then a dark-grey circle with a right pointing arrow. I've tried every password I can think of but it does nothing. When I click enter the password just dissapears.
Info:iMac, Mac OS X (10.7.3)
Is there any way to disable the ability to open the Startup Manager by pressing the option key?
Info:
iMac
I am having trouble trying to boot from my lion OS X install disk on a 2007 macbook. The disk ejects when I start up with the option key pressed.
View 1 Replies View RelatedI was surprised yesterday to find that holding down option key during restart did NOT bring up the Startup Manager screen.Usign Lion, wireless Appple Keyboard and external HD connected with FireWire. Is the isue the wireless keyboard? The Firewire connected drive?I was able to go to System Preferences and choose my startup volume but I much prefer the more temporary state pressing option key when rebooting to choose which volume for startup
Info:
MacbookPro (Unibody) 2.8 Ghz 4 Gig Ram; 24, Mac OS X (10.7.1), Hubby'siMac 20" 2009 ,10.6.6. 2 Gig RAM
I've used the bootcamp assistant to create a 200 GB partition for Windows. I installled windows 7 x64 on this partition, everything is going well so far. I'm able to press the option key after installation and run windows and perform some updates (note, I couldn't install the required software IN windows from the snow leopard disk, let's hope this is not the source of my problem).
Everything went well so I booted back to OSX and I noticed that I needed some more partitions, so I've split my Macintosh HD further into a Media and a School partition. I didn't touch the windows partition though.
After experiencing (before) with hackintosh computers I know that i have to rewrite the boot configuration of the harddrive. Because now I'm not seeing the Windows HD anymore while holding the option key at startup and therefore unable to boot into Windows anymore. Even parallels can't discover the Windows partition.
I've tried repairing permissions, and nothing. I've tried to use the repair option on the Windows 7 disk which states it can't be done.
What can I do? Do I have to repartition it again in an different order (bootcamp states that it can only create a Windows partition if there's only 1 partition in the harddrive, so it's logical to repartition the drive after bootcamp created the Windows HD or even after the installation of Windows itself). Perhaps I need to rewrite the boot config of the mac, which I don't have a clue about.
Being 64 bit windows is not an issue, because it worked at first (before repartitioning)
After clicking System Preference how do I get SCAN option to appear so documents can be scanned? Currently only the Print option is visible and having no problems with printing. Printer is a HP Laser Jet 300.
View 1 Replies View Relatedon startup, macbook pro showed flashing gray folder with question mark, but no startup. After several retries, now shows circle with diagonal diameter, and still no startup. worked fine yesterday.
Info:
MacBook Pro
I have just purchased a new iMac with Leopard. I already own a MBP with Tiger and I am trying to shares files between the two. The MBP connects to iMac and shows files easy as...however I have enabled sharing on iMac when I choose Network it recognises the MBP but always says connecting and after a few minutes shows connection failed.
View 2 Replies View RelatedI have two users defined on my macbook (one is New, and the other one, the Old one, is what I've always had).I was re-configuring File Sharing on the Old user.I turned files sahring off in the Old User, but when I log into the New, I can still acess to some folders that I have never set to be shared; only few folders have the red restricted access on it. The New User does have file sharing disabled, and non of its folder can be accessed; so, it's working Ok for this New User.Â
Info:
MacBook, Mac OS X (10.6.8)
I have Black MacBook with 10.7.3 in it when i press alt/option while starting the laptop the startup manager wont come and OS X boots.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
I am running an iMac G5 Version 10.5.6 (Leopard) and I have activated every security feature I can find.
I have disabled all sharing, I have disabled guest access, I have the firewall up allowing only essential services, and I am in stealth mode.
In spite of this, he is obviously able to see every website I visit, and I am afraid he can view my email or the court documents etc. on my machine.
When I click on my harddrive icon, I can see his machine, listed as PC server, under 'sharing', even though I have disabled all sharing!!
There does not seem to be an option to disconnect him, or block him.
I am trying to set up my home network to have the iMac share its' media library via iTunes, and access that media on other devices in the home. I would like to use iTunes Music Sharing, which is a very simple setup on the iMac and doesn't require any Apple ID to be entered on the devices accessing the shared library. However, I have found that the iPhone and iPad will not even see the shared media library when the iMac is set up to share its' library.Â
Only when I enable Home Sharing on the iMac, and configure Home Sharing on the iPhone and iPad, do I see the shared library available on those devices.Â
I would like to allow other family members in the household to access the shared media library without requiring them to have my Apple ID and password. iTunes Music Sharing is supposed to allow this.Â
Does iTunes Music Sharing not work when trying to share to an iPhone or iPad?Â
Info:
iMac, Mac OS X (10.7.4), Using iTunes 10.6.3 (25) on iMac
When I attempt to share my project to a DVD, it gives me the option of 'Next' rather than 'Share' - why? Then it says that the DVD Sharing was successful - but it hasn't! It saves a disk image to the destination. I don't know why the 'Share' option has suddenly changed!! I was burning DVDs just fine a few days ago!Â
Also, what is the most effective / quick way of burning DVDs using the MacBook, without purchasing other software?Â
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
6 month old MBP 15", been running 100% fine, plugged it into a projector the other day and it auto changed the screen resolution. I unplugged the device, went into settings and changed my screen resolution back to it's factory size as well as command & the minus key to make sure I wasn't zoomed in on anything.Â
I then did a system update for the following; Airport utility, Safari, Ricoh Printer, Digital Camera Raw, java, Itunes.Â
Restarted the computer as the updates had finished, then when turning back on the loading screen with the grey background, apple symbol and rotating loading symbol was zoomed in as much as the resolution would allow. So i restarted a couple more times, still the same thing - every time i turn the computer on the loading screen is massivly zoomed in, once it's done loading and moves to the log in screen it is fine.Â
I've tried plugging into the projecter again and editing my settings, that did nothing. It's like because i updated while the settings where wonky it's saved it somehow?Â
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Only on loading screen!
I've got a mac mini that i got less than 2 mos ago, and i'm trying to install ProTools onto my machine from a DVD. When i was initially configuring my machine, i checked out the Remote Disc feature, but over my lame wifi connection, things were taking way too long, and I dropped it. Now, when trying to setup this Pro Tools install, I seem to have lost the ability to use the DVD/CD sharing options in my System Preferences. The option just isn't there anymore. I have the option on my Snow Leopard MBP, and it's enabled there, and the two machines are connected on a computer-to-computer wireless connection.Â
Info:
Mac mini, Mac OS X (10.7.3)
I ran my usual check on the mac drive via "Verify Disk" option. It came up with "needs repair"...etc., and told me to repair it. I did a command r during boot so I could do a repair, and the software told me "your mac drive seems to be ok"??? Some kind of glitch, or need I worry about it at all?
Info:
27' iMac 2.7 GHz Intel Core i5, Mac OS X (10.7.2), Sony VPCL116FX Intel Core 2 Quad 2.66GHz 6G Ram 64b Win7
How do I clean my start up disk for more space? I have I cloud but don't really use it.
Info:
MacBook Pro, Mac OS X (10.7.4)
What's the deal with the lack of a 4GB option? I would think this would be a no brainer for a Pro ultra portable like the air... I'm really surprised they still don't offer it.
View 3 Replies View Related
