IMac Doesn't Startup / It Stops In Grey Apple
May 9, 2012my iMac doesn't startup, it stops in the grey apple and the spinning gear !!!
Info:
iMac, Mac OS X (10.6.8)
my iMac doesn't startup, it stops in the grey apple and the spinning gear !!!
Info:
iMac, Mac OS X (10.6.8)
Pretty smooth sailing until I had to reboot my mac pro. It just stops at the point where you have the grey Apple logo and the spinner.
My IMAC will not boot up. It was working fine this morning and I was working away then suddenly a MUSIC file wouldnt play, so I restarted the computer, and this is what happens now...It starts out like normal but after a period of showing me the APPLE logo it goes to the "NO" symbol. url...
Info:
iMac, Mac OS X (10.7.3), Snow Leopard
I am having trouble with my macbook: It wont load past the Grey apple start up screen with the spining gears, iv done Zapp on the PRAM, iv run ""/sbin/fsck -fy"". And I am now starting in Verbose mode, but its taking AGES, it must be loading for an hour now, its showing "Neb-computer /System/library/coreservices/loginwindow.app/contenst/MacOS/loginwindow: Login window Application started (Over and over and over again). I don't have an install disk.
View 1 Replies View RelatedI have a Mac Pro that is stuck at the grey startup screen. Grey apple, spinning wheel. I let it spin for about half an hour and then went on to try other things. Every attempt still leaves me stuck at the spinning grey wheel.
Info:various, Mac OS X (10.5.6)
Went to the Apple store, explained my problem and they brought out a new iMac for me. Did a retail swap instead of going through the Genuis Bar. I'm so happy =) =) Got a brand new iMac. This time, I disk Disk Check right away, and it says hard drive appears to be OK. No grey progress bar anymore! The problem was probably b/c the hard drive was defective. It had nothing to do with the unsafe shutdown, or pressing shift, etc...
I have a iMac 27'.. Purchased it 2 weeks ago.
I think I did an unsafe shutdown.. Or I pressed "shift" while booting, or something.. Idk and I also have WinXP installed on BootCamp. However for some reason now every time I startup my Mac, it loads with the grey Apple horizontal progress bar with a little loading animation on top. It's so annoying. This didn't happen after no firmware upgrade or anything. And I don't have any extra hard drives attached. Nothing. Everything is fine. Everything used to work. Even with BootCamp before. I think this happened after an unsafe shutdown or something. And also, my Mac has over 500GB free space still, so that's not an issue.
The progress bar at startup Takes 5-6 min extra to boot up. After it, the Mac OS X loads and everything is fine but that's not what my problem is. My problem is why should I be getting the stupid progress bar EVERYTHING I load my Mac?
I tried booting with installation disk, then going to Disk Utility but NOTHING. I click repair, and after 5 mins some error pops up saying backup your files when you can then reformat the disk.
Oh btw, Anytime I click Repair Disk it goes, then says: Updating boot support partitions for the volume as required. And after that it says: "Disk Utility stopped repairing "MY DISK NAME HERE". Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backend-up files.
Maybe the hard drive is damaged or defective.
MacBook 10.6.8 startup goes to grey screen with apple, wheel and progress bar, and takes 5 minutes. This started only recently. What might be wrong?
View 1 Replies View RelatedI own an iBook G4. I could not get it to boot up, it would just go to a grey screen with the apple symbol and a timer/clock that looked like a gear.FYI: I may provide more information than necessary in the text below. I'm not sure what is and isn't relevant.
Following some advice I found in this forum I got out my old OS disks to boot from the disc instead of the hard drive. I intended to archive the old hard drive and install my latest OS (10.4.6 on the disc, 10.4.11 was the version I had been running on the machine, I believe). The machine told me it needed 4.5 Gb to install 10.4.6 Tiger, but I only had 4.0 Gb left on the hard drive. So instead, I archived and installed with the OS that came with the computer originally, 10.3.4.
I got things going, did the archive and install, and got to the log in screen. Unfortunately, I could not remember the password, so I booted up in single user mode, and entered the following to get into the machine:
1. mount -uw /
2. rm /var/db/.AppleSetupDone
3. shutdown -h now
This got me in with a new admin login, and I started up in 10.3.4. I soon noticed that I could still see all of the files that I put on the hard drive on my old operating system. I thought I shouldn't be able to see them, but since I could I decided to try to copy them to an external hard drive. When I did, I got an error message saying that there was a read/write error. I was not entirely surprised, but I decided it was time to turn back to the forums for help.
What I want to do is copy everything from my old hard drive onto an external hard drive, make room on the iBook hard drive to reinstall my latest operating system (10.4.6). Once I've done that I'd like to get the essential files back onto the iBook from the external hard drive and continue using my computer (even though it is a dinosaur).
recently a friend of mine offered to update my 2009 MacBook to Mac osx Lion. when I received the computer back from him, it required a rather large update that has put my MacBook in a terrible state.
upon rebooting from the update, it froze at the grey Apple loading screen, and of course I thought nothing of it and gave it a little restart. Since then I cannot get it past the grey screen or the login window. it seems as though I cannot type in my password or click 'sleep' or any option the window gives me. I've been working on this issue all day, and I've tried countless things from the apple support community, with no avail.
I've tried clearing the cache, I've tried safe mode, I've tried the command+option+control+enter trick on the login page, I'm even trying to boot from the install disc my friend gave me...and it's just refusing to move past the grey screen.
Info:
MacBook, Mac OS X (10.7.3)
OSX 10.4.11 (Tiger) PPC G4 733 MHz
My Tiger volume gets stuck when starting up, it doesn't get further then the grey screen with the Apple logo. The clock with stripes keeps working but it doesn't get me to the blue screen.
For compatibility reasons concerning different softwares i use (Protools, Reason etc...) i keep changing the internal HD's for years now, thus changing the OS's (10.3.9, 10.4.11 etc). Never caused any problem.
When i boot from another 'master' volume (f.e. 10.3.9) OR from the OSX install CD, putting the Tiger volume as 'slave', in order to verify its disk permissions or the disk itself to be able to repair them, it's 'invisible', not 'seen' by the other volume.
So no 'verify disk permissions' nor Combo Update possible, maybe those things could solve my problem.
My cables are working perfectly: making the exact same connections and jumper settings with all my other volumes, is no problem at all: every volume is correctly seen by the others.
Also, there is no USB or external firewire device connected while trying to start up.
Remark: never had any problem with this Tiger volume, starting problem only occured yesterday AFTER installing Toast Titanium (which worked normally), shutting down and trying to start up again.
Nevertheless, some minor problems occured beforehand these last days: some apps didn't work anymore, like Safari, itunes, installer and UnrarX. But i don't know if it's linked.
I have a MacBook Pro from 2010 I believe with iOS Maverick installed. (MacKeeper is also on there, which I just found out is apparently malware)
So three days ago I was watching Netflix, the image froze, but the audio kept going. Figured my internet was slow, so I waited a little, nothing happened. pressed escape to leave the full screen mode, but nothing happened. None of the keys would do anything, not even the sound or brightness keys. So I did a force shut down by holding down the power button.
I waited a little, then decided to turn it back on. Start up sound played, white screen with grey apple logo and loading gear appeared together with a grey loading bar. I figured that this meant it had to repair something. But after about a minute or two it just went to a black screen/ shut down. I left it off for a day, tried it again, same thing. Next day I tried booting it up while holding the shift key to do the safe boot (I knew it wouldn't work since I already had the grey loading bar anyways), same thing happened.
My iMac (27", late 2013, Yosemite) starts using the power button. A black screen, white Apple logo and progress bar appear. When progress is at ca. 50% the computer powers off.
Info:
iMac, OS X Yosemite (10.10.1)
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
Info:
MacBook Pro, iOS 5.1
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
Powerbook #1: Once in terminal I typed...
/sbin/fsck -fy
...response was...
disk0s10: I/O error.
Invalid Key Length
(4, 44890)
** Volume check failed
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5)
jnl: journal_open: Error replaying the journal!
hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
I am having trouble starting my 21" iMac running Snow Leopard after I had shared the HD with my MB-Pro. I had removed the "everyone - Read Only" rights on the HD (on the iMac) and opened sharing so my MB could attach to it. Grey Apple Logo and progress circle upon startup now.Can changing these rights cause the system to not boot? I can go into single user mode but I am not sure what to do then.
Info:
iMac, Mac OS X (10.7)
My screen has gone to a very dark grey on startup. I can faintly make out the desktop icons, but it is about 98% black. Everything else seems to be fuctioning. iMac G417" Flat Panel 17" [Pixar-lamp style] OS 10.4
View 4 Replies View RelatedMy iMac will chime, then hang on the grey apple screen with the spinning gear. After a few minutes, it shuts off. Tried resetting Pram and all... Did not work. I troubleshooted using another website, and found it to be an I/O Error. The issue is I need to reinstall the OS, however, when I boot the install CD it hangs the minute I click the mouse or keyboard.
View 8 Replies View RelatedI Have a grey screen with the spinning wheel at startup and won't go away
Info:
iMac
Instead of showing white screen with an apple logo it became black screen instead but still can be log on to the desktop but ican't press alt to use bootcamp because the screen is all black TT?
Info:
MacBook Pro, Mac OS X (10.6.8)
Upon starting My Intel iMac, it stops at the Apple logo. I have restarted it several times and tried to hold down the "r" key while starting to enter the restore mode...nothing but the Apple logo. OSX 10.7.5
View 8 Replies View RelatedHoping someone can help - my imac (approx 15-18 months old , intel) won't start.
Last night on shutting down DPP (canon Digital image software) was hanging and system asked me if I wanted to force quit it...sadly I had switched off my bluetooth mouse and , as usually once mouse turned off switching it back on it never re connects - why did I buy the bletooth mouse and keyboard ?, so I could not confirm yes force quit - is there no way of selecting with keyboard like there is in windows ?
So I switched off at power switch. Tried to re switch on - grey screen came up, apple logo, the little timer circle but after a while timer circle stopped and nothing further happened.
have tried several more times and now don't even get timer.
My wife's macbook pro, 2010 circa, is not rebooting. With three attempted power-ups she gets a grey screen with the Apple logo...
View 2 Replies View RelatedI had been using my iMac all night, when all of a sudden the bouncing beach ball appeared and everything became unresponsive, apart from the mouse cursor itself. It might be worth noting that a few hours prior to this, I plugged in an external hard drive to burn off a DVD. This external hard drive has two partitions, the first being a restored image of Leopard; and the second, my out of date backup ("yes, I know").
I subsequently restarted my machine, enjoyed the chime, pondered the excessively long start up and looked bemused at the Leopard Setup wizard. I realised that the restored Leopard partition had booted up instead of the internal disc. So, I unplugged the external drive, pressed reset on the iMac and was immediately greeted first by the reassuring chime, then by the Apple logo and a lingering grey screen and finally by a flashing dark folder icon with a question mark in the centre for eternity.
I tried rebooting a few more times. Same. I've been frantically Googling but only found the PRAM reset and a very frightening iMac disassembly guide. I've tried plugging the external drive back it, but it refuses to boot Leopard from that now. What can I do? I feel so helpless on a Mac, on a PC I'd at least be able to open the sucker up before panicking! I've been working on a client's flash web dev project for months, and not made a back up in about half that time. The website is supposed to be going live tomorrow! Luckily I have the site uploaded, but the entire source code is potentially lost, so in the long term this is a major catastrophe!
Got my 24" 2.4GHz iMac on release last year, with Tiger. Installed Leopard on it on release day.
The problem I have is that ever since a botched Boot Camp installation I've had endless problems with certain applications hanging during their startup (notably Image Capture) or refusing to quit (notably iTunes). Force Quit doesn't resolve these issues. Restarting doesn't work because Force Quit can't quit them so I have to pull the plug or otherwise force a shutdown.
Upon restarting I either get the grey screen that instantly appears, or, if I've pulled the plug and left it for a few minutes I can get to the Apple symbol but no spinner or any further start up action. Occasionally I get lucky, get back up and running, and all is well until the next crash.
All this started happening when I decided to try installing Windows on Boot Camp again. I've had it on here a couple of times since Leopard was released but usually end up deleting it eventually because either the Windows installation gets bogged down or I get bored with it and never use it. Anyway, this time, using the same discs I've always used (and yes, it's SP2, so it should be fine and anyway it's worked at least twice before) when I got to the 'restart to continue installing Windows' bit, I got the white screen and nothing happened. After an hour or so of praying and restarting endlessly trying to get a response, I finally got it to recognise my OSX installation and was up and running again. The Boot Camp volume didn't appear to be there and Disk Utility revealed zero problems whatsoever. Everything looked fine until these recurring hangs, refusals to quit apps and screwed up start-ups.
Any ideas? I don't have the expensive Apple support, but it's less than a year old! Of course, I realise that this means nothing to Apple, who seem to think I should pay a premium in order to have my machine warrantied by them for more than 90 days. Grr...
If I get it up and running I'm thinking I should just wipe the ENTIRE system absolutely clean and re-install Leopard and then use my Time Machine backup to put all my data back on (pricelessly valuable as I use the machine to work on my photography with), but I'm concerned that if there's a flaw in the System somewhere, a corruption, that installing the Time Machine backup will just reintroduce the error. On the other hand, if it's a deeply embedded and invisinle partition corruption from the bad Boot Camp installation attempt, that should be fixed by wiping the entire drive to reinstall Leopard, right?
New iMac is stuck on grey apple screen after startup. It is a 3.4GHz Quad-core Intel Core i5 running OS 10.9.4. The problem occurred after a migration from my older 2009 iMac which is running Snow Leopard 10.6.6. When the restart occurred from Migration Assistant, the new computer will not boot up to the login screen. Disk utility did not solve problem.
Info:
iMac (27-inch, Late 2013), OS X Mavericks (10.9.4)
I click on safari icon on dock but it fails to connect, so I have to go through several windows to get connected, putting the WPA key in each time.
Always after a reboot, and possibly after a logoff/logon situation.
I have just bought a new iMac. I also have an Ipad 3. I have an itunes account. I downloaded itunes on the iMac. Then I plugged in the Ipad and clicked authorise purchases. I stopped it from synching from this library which would have wiped out iPad. Now how do I sign in to my existing itunes account on my new iMac? it doesnt accept my Apple ID or password or even my birthday if I try verify?
Info:
iMac, Mac OS X (10.4.1)
I am fixing this 2007 iMac for free for an autistic child. Apparently, changing computers for someone that is autistic isn't ideal. I don't have the history with this iMac, just that it isn't working. They supposedly did have the hard drive replaced? It sounds like a dvd is inside it when it starts up, could be the installation dvd?Either way, I have not seen it before where the Apple logo refuses to show on the start up screen. It just stays gray.
1. I've tried zapping the PRAM. Didn't have any changes.
2. I tried starting up in safe mode, but getting passed the apple logo is required for that
3. I tried single user mode, but getting passed the apple logo is required for that
4. I tried holding the c key to start up off of the dvd, nothing happens
5. I tried holding the mouse button (and cmd, opt, f, o) to manually eject the dvd during start-up.
Info:
iMac, Mac OS X (10.6.8)
Choosing 'Sleep' from the Apple Menu doesn't put my iMac to sleep, the first time, sometimes not the second, usually third try after a lo-o-o-o-n-g delay. On first try, keyboard shortcut 'Sleep' worked; thereafter, instead, the same key combo causes Restart.
24" iMac Intel Core 2 Duo
2.8 GHz (late 2008)
OS 10.6 (SL)
I press the power button, apple symbol appears then "thinking circle" the goes to dark screen where the only thing I can see is my mouse curser.
Info:
iMac, OS X Server