OS X V10.6 Snow Leopard :: Grey Screen Startup Due To Path Monitoring?
Feb 2, 2012
I have a mac pro running 10.6.6. Occaisionally startup gets stuck at a grey screen and requires a hard reboot or two. I've not found any correlation between what is plugged into the mac or not plugged in and the successful or unsuccessful startup. It just appears random. I've begun studying the console for anything that might indicate what's going on when this happens. One thing I notice is the following line: 2/2/12 8:37:31 AMcom.apple.launchd.peruser.501[134](com.apple.FolderActions.folders) Path monitoring failed on "/Volumes/LittleWet_02/SFX_aiff": No such file or directoryÂ
This line was the last line in the console before the hard reboot a few times, suggesting it might be the culprit. The volume it is looking for is an external HD that was connected to this computer once almost a year ago and never again. I can't determine what startup process is looking for that SFX_aiff directory, or why. Is there any way to tell this system to cease looking for that volume upon startup? Â
Info:
Mac Pro, Mac OS X (10.6.6)
View 2 Replies
ADVERTISEMENT
Jun 16, 2012
MacBook 10.6.8 startup goes to grey screen with apple, wheel and progress bar, and takes 5 minutes. This started only recently. What might be wrong?
View 1 Replies
View Related
Mar 15, 2012
My Snow leopard machine hangs during startup at the screen with the Grey Apple logo. It appears there is a SW issue with my OS X boot partition. Here are facts I have learned:The computer boots fine if I hold option at startup and select my boot camp partitionThe compute boots fine if I attach an external HD with OS X 10.6Running a disk repair from the external HD, I see the following two issues that are repaired. Also, note the last line about boot partitionsAfter this disk repair, the disk will still not boot, it hangs at the Grey Apple logo.Booting in safe mode does not resolve the issue, the machine will still not boot to a desktopBooting in Verbose mode, drivers initialize with the last succesful line being the ethernet drives (I believe) and then the hangup occurs. It is unclear what state the boot process is at on the hangup.Â
This situation has happen twice in the past few weeks. The first time I did a reinstall of OS X to resolve the issue. Then, the issue appeared again approximately two weeks later. I'm hoping to avoid a second reinstall (And really, avoid this issue in the future). It seems perhaps something in the boot partition table or the OS partition, although disk utility says the partition is fine. I have downloaded Test Disk 6.13 to look at the partition table, but I don't know how to interpret the outputs of that program. Â
Info:
MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.6.3), 2 GB RAM, Boot Camp, Ex HD avail
View 2 Replies
View Related
Jun 21, 2012
So out of nowhere my unibody MBP (specs, etc below) locked up yesterday while I was watching a video using VLC. It stopped responding to anything so I held down the power button until it turned off. I waited about 10 minutes and turned it back on. Grey screen with spinning cog showed up for about a minute and then kernel panic. Held down power button until it turned off. Tried repeatedly - same results. Won't boot into Safe Mode - still get a kernel panic everytime. It will let me boot the machine into Target Disk Mode. It will boot from my Snow Leopard install disk where I ran Disk Utility and "repaired disk" and "repaired disk permissions" on both the drive and the volume. All the "repair disk" and "repair disk permissions" ended with messages in green type saying that the disk/permissions appear to be OK.Â
I have an external FW drive used for TM backups for the machine. A fair amount of data has been added since the last TM backup (which was less than 30 days ago) that, ideally, I'd like to not lose by resorting to restoring from a TM backup. It's not the end of the world if the last (roughly) 30 days of data/changes ends up being lost, but I'm willing to work on getting it back up and running without doing an erase and install and then restoring from a TM backup if at all possible.Â
Definitely if any other information or data is needed from me in order for anyone to assist, please let me know what it is and I'll do my best to provide it.Â
Hardware Overview:Model Name: MacBook ProModel Identifier: MacBookPro5,1Processor Name: Intel Core 2 DuoProcessor Speed: 2.66 GHzNumber of Processors: 1Total Number Of Cores: 2L2 Cache: 6 MBMemory: 4 GBBus Speed: 1.07 GHzBoot ROM Version: MBP51.007E.B06SMC Version (system): 1.41f2Â
[Code]...
View 7 Replies
View Related
Nov 1, 2009
I have had a string of bad luck with my mac, a couple of days ago the screen started flickering and my mac froze (could still move trackpad mouse, not click). It started up fine again.. It did this a couple times more (had to restart pressing power button). Then it froze evereytime I put the power cable in it. I solved this problem with an PRAM reset.
But now it still freezes up, the screen will start flickering and i can only move the mouse. When i try to reboot it gets stuck on the grey screen. only once every 20 times Ill get into the os.
I have tried a pram reset, holding the power button, safe mode, hardware test (no probs found), starting up without external devices.
It wont boot from the cd if it is stuck on the grey screen...
Could someone may be tell me what to do? thinking about bringing it to the store tomorrow .
View 4 Replies
View Related
Apr 26, 2012
My MBP(#1) is stuck in grey screen. I've tried 4 or 5 of the steps suggested to get the computer to boot up. I used Target Disk Mode to copy hard disk files to my other MBP(#2), then inserted the Mac OSX install disk, then turned off the MBP(#1) and restarted with the C key held down. Instead of getting the OSX installation, it remained grey and gave me repeating 3-beeping sounds. What does this mean?
Info:
MacBook
Pro, Mac OS X (10.6.3)
View 4 Replies
View Related
May 20, 2012
IMac has snow leopard and does not boot has grey screen
Info:imac dual core 2.4 ghz, Mac OS X (10.6.4)
View 2 Replies
View Related
Mar 24, 2012
What does a grey screen with a flashing globe icons mean?
View 14 Replies
View Related
Aug 10, 2009
This morning, my G4 refused to start up as usual. Instead, I got a grey screen. Here's what I've tried so far and the results: Action: Started from DVD Install disk for Leopard to try an archive and install. Result: No hard drive was recognized for an install, archive and install, or erase and install, i.e., no drives appeared at all in the "Select a Destination" window, just empty white space. Action: Attempted safe boot (Command + Shift + V) Result: Flashing Globe Action: "Repair Disk" from Disk Utilities after starting from DVD Install disk for Leopard.
Result: Received "First Aid Failed" message. Error message read: "Catalog file entry not found for extent. Volume check failed." I can't even get it to eject the install disk (the "eject" key does nothing and there's no manual eject button for this Power Mac). This is a work computer and not having it functional is pretty hobbling so.
View 2 Replies
View Related
May 25, 2012
I put a new hard drive into my iMac 24". I could not install OS X because every time I turned the machine on it would shut down in less than a minute at the grey screen and Apple logo - whether the disk was in the slot or not. I finally was able to install Snow Leopard via firewire from a Macbook Pro. It runs fine - but I can only access the iMac Snow Leopard installation from the Macbook Pro. When I turn on the iMac, it still shuts down every time. The new drive was formatted with the Disk Utility as an external drive - since I couldn't get to it while it was in the iMac. My Snow Leopard disk was a full version, not an upgrade.
Info:
iMac, Mac OS X (10.6.8)
View 5 Replies
View Related
Mar 7, 2012
I have a HITACHI touro desk 3TB external hard dive connected to my iMac OS X version 10.6.8 Every time i start up the system it stays on a grey screen until I unplug the usb of the external hard drive then the system boots up normally. I have tried connecting different usb cables, plug in to different usb ports, and nothing works. I have other external hard drives and they don't give me any problems. is a pain plugging and unplugging the usb cable. Â
Info:
iMac, Mac OS X (10.6.8)
View 3 Replies
View Related
Feb 4, 2012
Can a bad video card make a Mac Pro stall out at the grey screen, spinning ball, but yet able to boot in safe mode?
Info:
Mac Pro, Mac OS X (10.6.8)
View 14 Replies
View Related
Apr 27, 2012
i just updated efi firmware on my macbook pro (late 2011).. and my mbp always starts with a grey screen (not white screen anymore) and the apple logo with a status wheel evertime i turn it on.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 22, 2012
Any good way to monitor bandwidth consumption for individual websites hosted on osx server?
View 1 Replies
View Related
May 7, 2012
All I get is gray screen in start up.
Info:
Mac Pro, Mac OS X (10.6.4)
View 2 Replies
View Related
May 14, 2012
Had to force quit a number of applications to shut down computer, restarted it but froze on opening. Shut down with the power button and now it won't get past Gray screen with rotating dial (thingy)...tried the safe boot option but this seemed to get stuck after identifying some issues.
Info:
MacBook (13-inch Late 2009)
View 3 Replies
View Related
May 25, 2012
I click on the hd hard drive and change the settings to no one can read or write now I had problem to open the computer as soon I start it became gray screen so I re-stall the software and as soon I back up the computer is asking me the password I type it and can't enter after keep asking me the password is wrong
Info:iMac, Mac OS X (10.7.4)
View 3 Replies
View Related
May 31, 2012
We are using a MAC server for VPN to the company but somehow when I restarted it today it is frozen on startup screen. what could be the reason? Â
Info:
Mac mini, Mac OS X (10.6.8)
View 3 Replies
View Related
Jun 14, 2012
i changed the name of the hard-drive for other reasons, and i guess i must have somehow erased the two which show up in the login box. And, i cannot locate the disks.
Info:
MacBook Pro, Other OS, no start up disk to be found
View 6 Replies
View Related
Aug 25, 2009
I am having trouble with my macbook: It wont load past the Grey apple start up screen with the spining gears, iv done Zapp on the PRAM, iv run ""/sbin/fsck -fy"". And I am now starting in Verbose mode, but its taking AGES, it must be loading for an hour now, its showing "Neb-computer /System/library/coreservices/loginwindow.app/contenst/MacOS/loginwindow: Login window Application started (Over and over and over again). I don't have an install disk.
View 1 Replies
View Related
Jan 31, 2012
I have a mid-2007 model and I replaced the x2 stock 1GB sticks with x2 2GB sticks. I followed the correct procedures, (I think), and when I powered it on the fan came back on but the screen was black. I unplugged the unit and replaced put the old RAM back in and now when I power it up the screen just goes grey and beeps when I turn it on.
Info:
Mac OS X (10.6.8)
View 3 Replies
View Related
Mar 16, 2012
My screen has gone to a very dark grey on startup. I can faintly make out the desktop icons, but it is about 98% black. Everything else seems to be fuctioning. iMac G417" Flat Panel 17" [Pixar-lamp style] OS 10.4
View 4 Replies
View Related
May 30, 2012
I sure hope your day is faring better than mine...To try and make my new issue easier to follow and to save face as I feel like an idiot, permit me to explain in bullet format:
First things first: I was running 10.6.8 SL on my 2006/7 model MacBook pro 15.4 w 2 gig sdram, right now I'm running nothing. When I turn on Mac it goes to grey screen and I see a folder/?/apple symbols rapidly interchanging on screen. This occurred after trying to use TM for my first time as I deleted some items I shouldn't have. In time machine all seemed kosher until the first attempt said not enough space on hd so I decided to only click on sys folder in TM. this was where prefs and files were accidentally deleted from after all. The kicker is my Mac still functioned I just noticed my HD no longer had a name, and a few other issues were happening, but I could access and open files, go online, etc... Post time machine none of that was possible! I tried first putting SL disk in but wouldn't read it, so tried restarting w disk in drive. HUGE ERROR on my part. This is where the grey screen desc above took its place. I looked on iPhone and have followed all available suggestions but have come to realize at some point I must have in error created a firmware Pw. I tried entering it but the lock simply stays put (when I attempted one of many fixes to my problem listed online). So now I'm left not knowing if whatever happened messed w my firmware pw or if I somehow chose something diff as pw but I highly doubt that. In any case, I have all of my life locked into a useless box now and I had thought this is why I bought external and used time machine. I've come to loathe TM. it's not as simple as I had thought otherwise none of this dshould have occurred. Does anyone have any ideas as to how I reset or altogether delete firmware pw, and best way to reinstall.
Info:MacBookPro, Mac OS X (10.6.8), 2.16 GHz Intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM
View 3 Replies
View Related
Jun 20, 2012
I just installed OS X 10.6 and now when i try to turn on my computer, i get this grey screen with computer code on it and the black box that says to restart my computer. I tried safe boot along with all the other steps on the page for the grey screen but nothing works.
Info:
iMac, Mac OS X (10.6)
View 3 Replies
View Related
Nov 9, 2009
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
View 6 Replies
View Related
Apr 1, 2012
I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
Info:
iMac, Mac OS X (10.6.8)
View 13 Replies
View Related
Apr 9, 2012
Mac stay on gray to long before it turn on
Info:
MacBook Pro, Mac OS X (10.6.8)
View 1 Replies
View Related
Aug 25, 2014
I recently updated to snow leopard and now I get blue screen on start-up.
I manage to get to enter my password and then to my desktop for a few seconds before it flicks back to my login.
I tried using disk utility from the install disc and it said HD appears to be ok. But it hasn't solved the problem.
Info:
MacBook Pro, Mac OS X (10.6.7)
View 2 Replies
View Related
Mar 19, 2012
I had to move around data and now I have a ton of aliases to fix. I know you can fix an alias by doing "get info" and find original but the window that opens hides the original path and can't be moved. Further more I'd simply need to edit out the first part of the "original" location. I thought opening an alias in textedit would allow me to do that easily but it's unreadable. how I could fix these quickly instead of browsing deep in folder structure to find them again?
Info:
Mac OS X (10.6.7), 16GB RAM
View 3 Replies
View Related
Jul 2, 2012
Ever since I downloaded 10.7.4, a blank grey screen appears at startup. If I click on the mouse, a white square cursor appears which I can drag around and `uncover` a place to input password. Then the galaxy image appears, and I have to input password again.
Info:imac, Mac OS X (10.5.1)
View 4 Replies
View Related
