... and once started I then have to do a restart as the screen misbehaves by erratically scrolling between the desktop and the Launchpad. A real time waster!
Info:
iMac, Mac OS X (10.7.2)
Upon start up, I hear the chime, see the grey Apple load screen, but then after it just reaches the blue screen and stops. Cannot reach login screen, unless in safe mode.Steps I've tried:
-Reinstall tiger (erase and install)
-Replace CMOS battery (time now works correctly)
-Run Apple Hardware Test (no errors)
Macbook air only boots in safe mode, and if I PRAM, the password for the mac does not work
Info:
MacBook Air, Mac OS X (10.7.4)
Did a Shift - Command-V and the black screen showing all the startup steps appeared and it all looked good except: AFL Alart Sockwed cant update and INIT Reboot transmit failed. All else looks good. I have tried this 3 times and never go past that point. Then the screen turns off white like it does when it starts normally before the apple appears and the last time the screen went black.
I have tried starting with just the Shift Key and computer starts up but not in safe mode. I have tired starting with the OS X disk and the C key and it will not recognize the disk.I used the #1 disk since the instructions are printed on the disk. Did not work so I tried disk 2 and I get a menu to start the OS or tools. If I click on either one the screen goes white and stays that way.
computer starts fine and provides a login window, and then the desktop screen with screen saver pictures in perfect color. As it goes through starting programs it starts the same programs that is had open when the computer originally crashed. Even when I close them, before it locks up again, and I am forced to restart the same programs open up to the same place. Its like the computer is frozen in one location and will not go beyond that point. Eventually the screen turns white and sometimes black and sometimes gray.
Tech support thought it was the video card, put a new one in but did not fix the problem and then said it was not that but that it was the monitor. I said that did not make sense since the monitor and desktop icons and pictures are beautiful and clear. They then said it was the inverter board on the monitor and Apple only replace the whole thing. I purchased an inverter board and replace it. No change. The tech person said that the computer works find without the monitor connected - I will see if that is correct next. Isn't that a more systimatic testing procedure then trying parts to see if it works? Oh I did do the complete long hardware test. Took about an hour and it passed! Isn't this strange?
Info:iMac, Mac OS X (10.5.8)
my Imac takes 5 minutes to start , most of the time it is a blue screen....
Info:
iMac, Mac OS X (10.6.4)
Soda was spilled on the side of the notebook. It was never powered on. I opened up the notebook and cleaned all the components. Now the MBP only boots into safe mode.
View 4 Replies View RelatedI have a number of macs one being a G5 1.8 x 2 that has been running 10.3.9 for quite some time with no problems whatsoever. Decided to upgrade to keep in line with other macs but first just to 10.4. Machine only boots in safe boot mode. If regular boot, get message that I need to restart. Restart message reappears and often fans race. May have kernell panic but did hardware test, disk first aid and all hardware checks out fine. Finally downgraded back to 10.3 and machine works fine. Did total clean install with 10.4 again and same results. Is there a firmware I need to upgrade, I can't find one. I have been working with macs exclusively since 1989 (never user a "PC") but I'm perplexed.
View 4 Replies View RelatedWhy does my computer sometimes startup in safe boot
Info:
iMac Power Pc, Mac OS X (10.5.2)
I just go a new Macbook Pro 13' from my school (my school made it mandatory to get a mac this year) and I was installing some of my applications. Then I got the "You need to restart your computer" message. I restarted, and all i got was a blue screen with my pointer. Then after a while it says the same restart message. Also I have tried booting from the Snow Leopard Disk, but I get the same message before the actual SL installer comes up. I have been able to get the Macbook to boot in safe mode and I repaired permissions and the disk, however that does not seem to help. I have also reset the PRAM and that did nothing. I am running out of ideas... how can I fix this? I am using 10.6.4.
View 1 Replies View RelatedToday, my Macbook Pro 15" started to automatically boot up in Safe Boot / Safe Mode. So every time I boot up, I have to wait 5-10 minutes and stuff. It's not normal.
I tried: Restarting, Shutting down and booting.
Resetting PRAM, NVRAM
Verifying and repairing Hard Disk in Disk Utility (it fails). Tried in Mac OS and OS Installation Disk. etc. I got this computer 6 days ago, and there is already this problem. Is there a way without reinstalling the OS? I have Windows installed on it for gaming, but I don't see anything else that could be causing the problem.
I have a feeling I need a new motherboard to replace my graphics chip. I was playing World of Warcraft last night when the entire computer froze and a pink grid came over the computer. Could not force quit. About 10 seconds later, Kernel Panic screen and I have to hard reboot. Every time I reboot the pink grid is still there and it kernel panics, does not get past the spinning Apple logo. I was able to hold down shift and get it to safe mode, and was able to back up my files that way. I also ran the Apple hardware test, but it said no problems found. I am typing to you now in safe mode on this pink screen.
View 1 Replies View RelatedRandomly today when I started up my Imac I7... there was progress bar at the bottom much like if you updating your iphone... it then booted into safe mode...I restarted and it booted normal...
View 3 Replies View RelatedI turn the machine on and the apple icon comes up and the thinking gear comes up but It won't go anywhere else I can't even get into safe mode.
View 1 Replies View RelatedI have a 2009-2010 27inch iMac with OSX and software fully updated.My Mac started shutting down or going into deep sleep when left on.I've tried rebooting, power long hold, checking cords etc.I've attempted the 5 second hold after disconnecting the power cord, plugging back in and start no luck.I hear a very small click inside when I long hold, sometimes a very faint spinning sound but nothing else.The fan came on once after a start attempt but nothing else happened. I can't seem to safe start because the screen remains black.
Info:
iMac, Mac OS X (10.6.8)
Tried everything from archive and install (wouldn't read disk2 until the 9th try and ended up with 9 system folders). Then tried an Erase and Install. Still it refuses to boot. Get's hung up at the blue screen. Will only boot in safe mode. Now for the last few days even the startup chime is missing. Tried PRAM and NVRAM resets. no help. Won't boot from DiskWarrior boot disk either. Just hangs
iMac Specs:
Machine Name:iMac G5
Machine Model:PowerMac8,2
CPU Type:PowerPC G5 (3.0)
Number Of CPUs:1
CPU Speed:1.8 GHz
L2 Cache (per CPU):512 KB
Memory:1 GB
Bus Speed:600 MHz
Boot ROM Version:5.2.5f1
Serial Number:QP52604RSDU
Occasionally, this iMac starts, and it will say "safe boot" in the login screen, and I have not done anything to make it do that. I do not have a sticky shift key, as far as I can tell.
Info:
iMac, Mac OS X (10.6.8), 27" 2.7GHz Quad i5 12GB mem 1TB
I'm getting the gray screen when I startup. I tried using the install disc to repair the utility, but it said it cannot be repaired. I had to use a plug-in mouse instead of my normal wireless mouse to get the startup disc out on a restart. I want to now startup in safe mode, but holding down shift during startup with my wireless keyboard doesn't work. Do I need to have a plug-in type keyboard for this function to work? Can you backup files using safemode?
Info:
iMac, Mac OS X (10.6.3)
my Macbook pro hangs during start up and boots off by itself. I cannot even logged in.
Info:
MacBook Pro (15-inch Early 2011)
Mac Pro will not start up, boots half way then shuts down?
View 1 Replies View RelatedLeopoard 10.5.2 - Quad Core Mac Pro.
I'm trying to start up in safe mode, per a recommendation from Objective Development, for a Little Snitch upgrade. I'm following these steps perfectly, and I see no indication that I'm running in safe mode. Of course, I've never seen safe mode, so I'm not sure what it looks like, but I'm guessing I ain't in it because I never see the "Safe boot at the login window".
Quote:
To start up into Safe Mode, do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key (the Shift key should be held as soon as possible after the startup tone but not before).
4. Release the Shift key when you see the gray Apple and the spinning gear. Please be patient, booting in Safe Mode may take some while.
During the startup you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
I have a mac book pro 17. I have 2 logins. on the main one it takes a long time and only the top bar appears. the normal icons dont appear. when i move the mouse i just get the spinning wheel and i stays like that. you can not operate anything. you have to hold power button to turn it off.Â
- if i try to log in in safe mode it does not owrk either.Â
- if i sign in as another user in safe boot, things seem to work. i suspect something is not sitting right in the main sign in.Â
I have checked the disc and it says it is fine. Â I have tried to back up but i does not seem to work, it just seems to hang too.Â
Info:
MacBook Pro, OS X Mavericks (10.9.3)
My 2011 17" MBP won't with OS X Lion won't start up in safe mode...
Info:MacBookPro, Mac OS X (10.7.4), 2011 17" MBP with 8 Gigs of Ram
I woke up this morning and my iMac G5 (w/ Leopard) was frozen. I restarted it manually, but it would freeze on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM - any other ideas?
What can I do in Safe Mode that might fix my comp? I haven't recently installed any applications, and I have all "open at login" items turned off.
I've tried the safe boot but seems it is not working. I do need to recover my files.
Info:
MacBook Pro, Mac OS X (10.6.8)
My iMac G5 froze. I restarted it manually, but it kept freezing on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM.
Finally I resorted to an Archive & Install. That didn't work so I did a clean install but that didn't help either. After having done everything under the sun to it to get it to work, it will still only start up in safe mode. I even tried starting up off each of my two external fire wire drives with no luck (it froze on the fire wire screen with both drives - a Maxtor and a Western Digital). I am thinking that something on the mother board has died so that normal booting is prevented but safe mode booting is allowed.
My macbook (early 2008 model). Looks like my disk drive isn't working correctly; I put in a new hard drive. I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard (with firewire); and downloaded lion from app store. Is there a way to wipe clean and start over? There is nothing on the computer that I need. I keep all my important files on an external hard drive. My big concern is I don't know how to do it and second since I don't have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
My computer has a kernel panic problem. And I'd like to fix it by booting as safe boot. I hold the shift key after the tone, and release it when the apple and loading gear appear. But, the bar that indicates that safe mode is loading never appears. It'll just boot on regular boot.
View 2 Replies View Relatedin safe mode works normal, but usually start after a while leopard hangs, I've done hardware test dvd and normal passes through the test okay what do I do
Info:
MacBook, Mac OS X (10.5.8)
I've been trying to partition my drives and install Windows on my late 2012 imac. I last adjusted my partitions using disk utility and now receive the prohibitory sign on start-up and cannot boot up in safe mode; pram reset; type commands in single user mode. Running on Mavericks OS.
View 1 Replies View RelatedMy imac boots up and then the screen goes black, i have made a short video to show the error...i have also run disk utility and it comes back with no errors. URL....
View 3 Replies View Related