Software :: Intel I Mac Won't Start / Wont Go In Safe Mode?
Jan 18, 2009I turn the machine on and the apple icon comes up and the thinking gear comes up but It won't go anywhere else I can't even get into safe mode.
View 1 RepliesI turn the machine on and the apple icon comes up and the thinking gear comes up but It won't go anywhere else I can't even get into safe mode.
View 1 RepliesDid a Shift - Command-V and the black screen showing all the startup steps appeared and it all looked good except: AFL Alart Sockwed cant update and INIT Reboot transmit failed. All else looks good. I have tried this 3 times and never go past that point. Then the screen turns off white like it does when it starts normally before the apple appears and the last time the screen went black.
I have tried starting with just the Shift Key and computer starts up but not in safe mode. I have tired starting with the OS X disk and the C key and it will not recognize the disk.I used the #1 disk since the instructions are printed on the disk. Did not work so I tried disk 2 and I get a menu to start the OS or tools. If I click on either one the screen goes white and stays that way.
computer starts fine and provides a login window, and then the desktop screen with screen saver pictures in perfect color. As it goes through starting programs it starts the same programs that is had open when the computer originally crashed. Even when I close them, before it locks up again, and I am forced to restart the same programs open up to the same place. Its like the computer is frozen in one location and will not go beyond that point. Eventually the screen turns white and sometimes black and sometimes gray.
Tech support thought it was the video card, put a new one in but did not fix the problem and then said it was not that but that it was the monitor. I said that did not make sense since the monitor and desktop icons and pictures are beautiful and clear. They then said it was the inverter board on the monitor and Apple only replace the whole thing. I purchased an inverter board and replace it. No change. The tech person said that the computer works find without the monitor connected - I will see if that is correct next. Isn't that a more systimatic testing procedure then trying parts to see if it works? Oh I did do the complete long hardware test. Took about an hour and it passed! Isn't this strange?
Info:iMac, Mac OS X (10.5.8)
my Imac takes 5 minutes to start , most of the time it is a blue screen....
Info:
iMac, Mac OS X (10.6.4)
I'm getting the gray screen when I startup. I tried using the install disc to repair the utility, but it said it cannot be repaired. I had to use a plug-in mouse instead of my normal wireless mouse to get the startup disc out on a restart. I want to now startup in safe mode, but holding down shift during startup with my wireless keyboard doesn't work. Do I need to have a plug-in type keyboard for this function to work? Can you backup files using safemode?
Info:
iMac, Mac OS X (10.6.3)
Leopoard 10.5.2 - Quad Core Mac Pro.
I'm trying to start up in safe mode, per a recommendation from Objective Development, for a Little Snitch upgrade. I'm following these steps perfectly, and I see no indication that I'm running in safe mode. Of course, I've never seen safe mode, so I'm not sure what it looks like, but I'm guessing I ain't in it because I never see the "Safe boot at the login window".
Quote:
To start up into Safe Mode, do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key (the Shift key should be held as soon as possible after the startup tone but not before).
4. Release the Shift key when you see the gray Apple and the spinning gear. Please be patient, booting in Safe Mode may take some while.
During the startup you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
I have a mac book pro 17. I have 2 logins. on the main one it takes a long time and only the top bar appears. the normal icons dont appear. when i move the mouse i just get the spinning wheel and i stays like that. you can not operate anything. you have to hold power button to turn it off.Â
- if i try to log in in safe mode it does not owrk either.Â
- if i sign in as another user in safe boot, things seem to work. i suspect something is not sitting right in the main sign in.Â
I have checked the disc and it says it is fine. Â I have tried to back up but i does not seem to work, it just seems to hang too.Â
Info:
MacBook Pro, OS X Mavericks (10.9.3)
My 2011 17" MBP won't with OS X Lion won't start up in safe mode...
Info:MacBookPro, Mac OS X (10.7.4), 2011 17" MBP with 8 Gigs of Ram
I woke up this morning and my iMac G5 (w/ Leopard) was frozen. I restarted it manually, but it would freeze on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM - any other ideas?
What can I do in Safe Mode that might fix my comp? I haven't recently installed any applications, and I have all "open at login" items turned off.
I've tried the safe boot but seems it is not working. I do need to recover my files.
Info:
MacBook Pro, Mac OS X (10.6.8)
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
My iMac G5 froze. I restarted it manually, but it kept freezing on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM.
Finally I resorted to an Archive & Install. That didn't work so I did a clean install but that didn't help either. After having done everything under the sun to it to get it to work, it will still only start up in safe mode. I even tried starting up off each of my two external fire wire drives with no luck (it froze on the fire wire screen with both drives - a Maxtor and a Western Digital). I am thinking that something on the mother board has died so that normal booting is prevented but safe mode booting is allowed.
My macbook (early 2008 model). Looks like my disk drive isn't working correctly; I put in a new hard drive. I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard (with firewire); and downloaded lion from app store. Is there a way to wipe clean and start over? There is nothing on the computer that I need. I keep all my important files on an external hard drive. My big concern is I don't know how to do it and second since I don't have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
in safe mode works normal, but usually start after a while leopard hangs, I've done hardware test dvd and normal passes through the test okay what do I do
Info:
MacBook, Mac OS X (10.5.8)
I've been trying to partition my drives and install Windows on my late 2012 imac. I last adjusted my partitions using disk utility and now receive the prohibitory sign on start-up and cannot boot up in safe mode; pram reset; type commands in single user mode. Running on Mavericks OS.
View 1 Replies View RelatedHow do I boot in a safe mode my iMac? I hold down the shift key after the whistle when turns on but it take me to the normal screen.
Info:
iMac, iOS 5.1.1
Everytime I start up my iMac (2011, 27 inch, OS X 10.7.4 Lion) it starts on what seems to be safe mode. After starting up on safe mode, I restart (not shut down, just restart) again, then it comes back normally.
Info:
iMac, Mac OS X (10.7.4)
Is it possible to place a password when booting into safe mode on my Mac. Let me explain a little more. I know that the accounts are all their and you can place passwords on the user accounts, but here is my problem. I use k9 web filtering and when you boot up in safe mode it does not work and you have unfiltered access to the internet. Is it possible to only allow the system admin to boot into safe mode with a password so no one else would have access? Its a work around the filter I am trying to block.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.4)
My imac keeps starting up in safe mode how can i stop this?
Info:
Logic Studio, Mac OS X (10.6.7)
My 27" iMac will only start in safe mode. I need to back it up before service, but it will not read (or see) any external drives that I plug in. How do I back it up in safe mode?Â
Info:
iMac, Mac OS X (10.7.5)
a bit complicated.  I have a 3 year old iMac, Snow Leopard 10.5.2 on the dics, but I updated it so..a pretty receent version of Snow Leopard. I had had kernel panics before- it turned out to be a bad RAM chip, replaced it and it fixed the problem.Â
This time, I was hoping it was the same. I got a new RAM chip, swapped them out and ID'ed the bad one. Reseated the RAM. Probelm is, when I was trying to fix the problem, I had booted in Safe Mode. Now the iMac starts up normally- the chime, the Apple- AND the Safe Mode bar.
Which progresses for about 5 seconds before another Kernel panic descends. This happens whether the keyboard is connected or not. At this point the Safe Mode at startup bugs me more than the kernel panics! Sigh.Â
I wonder if there's any key combo on startup I could try to at least get out of Safe Mode before Kernel panic sets in. When my laptop has a kernel panic i can usually repair with Disk repair on CD.  I realize this sounds hopeless! And i need it repaired, but money is an issue.
I've read the posts regarding this issue and have
1) Reset the PRAM
2) Successfully viewed the choice of both of my startup disks
3) Had success starting up in Safe Mode
When I restart after Safe Boot, I get the same no-go. What now?
Info:
iMac, Mac OS X (10.6.8)
I turned on my iMac (20in 2008 model) and after the apple logo appears, I get a gray screen that says "process 1 exec of sbin/launched failed". I'm pretty sure it's because my hard disk is full. I tried booting up in safe mode, but my wireless keyboard battery died. I put in new batteries, but I need to get to the desktop to reconnect the keyboard. I tried using a usb wired keyboard, but it doesn't power up until I'm on the desktop screen. I don't know what else to do. I need a keyboard to boot to safe mode, but I need to be fully booted to work the keyboard.
Info:
iMac, Mac OS X (10.5.8)
... and once started I then have to do a restart as the screen misbehaves by erratically scrolling between the desktop and the Launchpad. A real time waster!
Info:
iMac, Mac OS X (10.7.2)
Why does my computer sometimes startup in safe boot
Info:
iMac Power Pc, Mac OS X (10.5.2)
My 2014 21" iMac powers itself down after about 10 seconds while trying to startup in safe boot mode. I'm not even sure why it is trying to start in safe boot mode. I shut it down after a power outage while plugged into an APS UPS. I'm guessing that since I interrupted the auto shutdown it is restarting in safe boot mode. Either way, I get a grey screen with a big apple and a progress bar. The progress bar gets to about a tenth full and the power just shuts off.Â
I've tried starting up while holding the alt key to select the Macintosh HD. The same thing happens.
Info:
iMac, OS X Mavericks (10.9.4)
I have a 2009-2010 27inch iMac with OSX and software fully updated.My Mac started shutting down or going into deep sleep when left on.I've tried rebooting, power long hold, checking cords etc.I've attempted the 5 second hold after disconnecting the power cord, plugging back in and start no luck.I hear a very small click inside when I long hold, sometimes a very faint spinning sound but nothing else.The fan came on once after a start attempt but nothing else happened. I can't seem to safe start because the screen remains black.
Info:
iMac, Mac OS X (10.6.8)
Been having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs.  Was able to run through safe mode boot once but now seems to hang about 20% in everytime.  Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info:
Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
Occasionally, this iMac starts, and it will say "safe boot" in the login screen, and I have not done anything to make it do that. I do not have a sticky shift key, as far as I can tell.
Info:
iMac, Mac OS X (10.6.8), 27" 2.7GHz Quad i5 12GB mem 1TB
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies View Related