MacBook Pro :: OS X Lion Won't Start Up In Safe Mode
May 12, 2012My 2011 17" MBP won't with OS X Lion won't start up in safe mode...
Info:MacBookPro, Mac OS X (10.7.4), 2011 17" MBP with 8 Gigs of Ram
My 2011 17" MBP won't with OS X Lion won't start up in safe mode...
Info:MacBookPro, Mac OS X (10.7.4), 2011 17" MBP with 8 Gigs of Ram
I've tried the safe boot but seems it is not working. I do need to recover my files.
Info:
MacBook Pro, Mac OS X (10.6.8)
My macbook (early 2008 model). Looks like my disk drive isn't working correctly; I put in a new hard drive. I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard (with firewire); and downloaded lion from app store. Is there a way to wipe clean and start over? There is nothing on the computer that I need. I keep all my important files on an external hard drive. My big concern is I don't know how to do it and second since I don't have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
in safe mode works normal, but usually start after a while leopard hangs, I've done hardware test dvd and normal passes through the test okay what do I do
Info:
MacBook, Mac OS X (10.5.8)
Leopoard 10.5.2 - Quad Core Mac Pro.
I'm trying to start up in safe mode, per a recommendation from Objective Development, for a Little Snitch upgrade. I'm following these steps perfectly, and I see no indication that I'm running in safe mode. Of course, I've never seen safe mode, so I'm not sure what it looks like, but I'm guessing I ain't in it because I never see the "Safe boot at the login window".
Quote:
To start up into Safe Mode, do this:
1. Be sure the computer is shut down.
2. Press the power button.
3. Immediately after you hear the startup tone, press and hold the Shift key (the Shift key should be held as soon as possible after the startup tone but not before).
4. Release the Shift key when you see the gray Apple and the spinning gear. Please be patient, booting in Safe Mode may take some while.
During the startup you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Did a Shift - Command-V and the black screen showing all the startup steps appeared and it all looked good except: AFL Alart Sockwed cant update and INIT Reboot transmit failed. All else looks good. I have tried this 3 times and never go past that point. Then the screen turns off white like it does when it starts normally before the apple appears and the last time the screen went black.
I have tried starting with just the Shift Key and computer starts up but not in safe mode. I have tired starting with the OS X disk and the C key and it will not recognize the disk.I used the #1 disk since the instructions are printed on the disk. Did not work so I tried disk 2 and I get a menu to start the OS or tools. If I click on either one the screen goes white and stays that way.
computer starts fine and provides a login window, and then the desktop screen with screen saver pictures in perfect color. As it goes through starting programs it starts the same programs that is had open when the computer originally crashed. Even when I close them, before it locks up again, and I am forced to restart the same programs open up to the same place. Its like the computer is frozen in one location and will not go beyond that point. Eventually the screen turns white and sometimes black and sometimes gray.
Tech support thought it was the video card, put a new one in but did not fix the problem and then said it was not that but that it was the monitor. I said that did not make sense since the monitor and desktop icons and pictures are beautiful and clear. They then said it was the inverter board on the monitor and Apple only replace the whole thing. I purchased an inverter board and replace it. No change. The tech person said that the computer works find without the monitor connected - I will see if that is correct next. Isn't that a more systimatic testing procedure then trying parts to see if it works? Oh I did do the complete long hardware test. Took about an hour and it passed! Isn't this strange?
Info:iMac, Mac OS X (10.5.8)
my Imac takes 5 minutes to start , most of the time it is a blue screen....
Info:
iMac, Mac OS X (10.6.4)
I have a mac book pro 17. I have 2 logins. on the main one it takes a long time and only the top bar appears. the normal icons dont appear. when i move the mouse i just get the spinning wheel and i stays like that. you can not operate anything. you have to hold power button to turn it off.Â
- if i try to log in in safe mode it does not owrk either.Â
- if i sign in as another user in safe boot, things seem to work. i suspect something is not sitting right in the main sign in.Â
I have checked the disc and it says it is fine. Â I have tried to back up but i does not seem to work, it just seems to hang too.Â
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I woke up this morning and my iMac G5 (w/ Leopard) was frozen. I restarted it manually, but it would freeze on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM - any other ideas?
What can I do in Safe Mode that might fix my comp? I haven't recently installed any applications, and I have all "open at login" items turned off.
I turn the machine on and the apple icon comes up and the thinking gear comes up but It won't go anywhere else I can't even get into safe mode.
View 1 Replies View RelatedBeen having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs.  Was able to run through safe mode boot once but now seems to hang about 20% in everytime.  Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info:
Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
My iMac G5 froze. I restarted it manually, but it kept freezing on a blue screen without loading the OS. It can start up fine in safe mode, but that's it! I've tried repairing permissions and zapping the PRAM.
Finally I resorted to an Archive & Install. That didn't work so I did a clean install but that didn't help either. After having done everything under the sun to it to get it to work, it will still only start up in safe mode. I even tried starting up off each of my two external fire wire drives with no luck (it froze on the fire wire screen with both drives - a Maxtor and a Western Digital). I am thinking that something on the mother board has died so that normal booting is prevented but safe mode booting is allowed.
I'm getting the gray screen when I startup. I tried using the install disc to repair the utility, but it said it cannot be repaired. I had to use a plug-in mouse instead of my normal wireless mouse to get the startup disc out on a restart. I want to now startup in safe mode, but holding down shift during startup with my wireless keyboard doesn't work. Do I need to have a plug-in type keyboard for this function to work? Can you backup files using safemode?
Info:
iMac, Mac OS X (10.6.3)
I've been trying to partition my drives and install Windows on my late 2012 imac. I last adjusted my partitions using disk utility and now receive the prohibitory sign on start-up and cannot boot up in safe mode; pram reset; type commands in single user mode. Running on Mavericks OS.
View 1 Replies View RelatedI am running OSX Lion latest version on my Macbook Pro 4,1 and can't get the thing to boot from any source. Always get's stuck at the grey screen with apple logo. Have tried all the following...
- Straight Boot (power on)
- Boot via Recovery HD (hold option on bootup then select)
- Boot via Safe Mode (Holding Shift on bootup)
- Boot via Safe Mode Verbose (Shift, Command, V)
- Boot via bootable Lion USB Key (Hold option, and choose the USB drive - not the same USB key works on my other macbook pro)
On every one (except verbose) it just get's stuck on the grey screen with spinning timer thingy. I have done PVRAM reset, SMC reset and have reseated the RAM and all to no avail. I'm pretty sure the problem was caused by removing battery at wrong time (device not responding after sleep mode started and I plugged in power - should have been more patient!)
I have a Time Machine backup but it's a bit older than I thought and very much want to get my newer photos off it before rebuilding - not that Time Machine would work in current state anyway. So what are my remaining options? Will I have to open it up and remove the HD as next step or is there anything else left to try? Can I remove the HD and connect it via a USB caddy to my existing Mac to recover info (hard drive spins and sounds ok to me)?
Info:
MacBook Pro, Mac OS X (10.7.3)
After installation update Mac OS Lion 10.7.3, my macbook pro starts allways en safe mode. How can I resolve this ?
Info:
iPod touch, Mac OS X (10.6.3)
my macbook pro today started to freeze at logo scrren. I tried to start it up in both safe and recovery modes but it doesn't work either. I got the system to start in safe mode only once and the scrren looked like in the attached image.When I tried printing the screen instead of taking a photo with my mobile, the image appeared to be normal (without those noisy rectangles), but it wasnt. Then itried restarting but it's been impossible. As i said i tried booting on safe and recovery modes but the circle below the apple logo appèars and then it freezes again. I read about aproblem with the graphic card similar to mine in earlier models, I don`t know if it is the same problem.Â
Info:
MacBook Pro (15-inch Late 2008), Mac OS X (10.7.4), 9400M/9600MGT
I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies View RelatedThe only old discussion from 2007 suggests up to 30 minutes. It seems strange that it would take so long. Has anyone tried this more recently on a PowerMac G5 using Mac OS X 10.7?
Info:
PowerMac, Mac OS X (10.7.3)
If I try to mount almost any DMG file I just get an error message saying that there is no mountable file system. I know that these are not corrupt dmg files because these are ones that I have mounted before, it affects almost every single one and more importantly if I reboot in Safe Mode every single one mounts perfectly.Â
Clearly then something is running in normal mode that is preventing dmg's from mounting but I don't know how to find out what. I went to System Properties>User & Groups>Login Items and removed everything that was there but that was just iTunes Helper and something called WDC something or other which was unchecked anyway and is just a utility that controls my external hard drives. With everything removed and rebooted still DMG files won't mount.Â
Safe Mode = DMG's mount
Normal Mode = DMG's won't mount.Â
how I can find out what is causing this problem and/or how to fix it as it's annoying as **** and preventing me from easily updating software.
Info:
iMac, Mac OS X (10.7.3), 3.1Ghz Quad-Core Intel core i5
Unable to boot into safe mode. Not hearing chime. Holding shift key not working.
Info:Mac Pro, Mac OS X (10.7.3)
While I have no problem booting into the Startup Manager using the command key with my wireless keyboard I'm finding it impossible to boot into Safe Mode using the option key.
Info:
Mac OS X (10.7.4), OWC Mercury Elite Ext Drive
A few days ago I updated to Lion 10.7 with which I have had no problem. A day later I installed Moneywiz, Skydrive for mac and did some updates of various software. Since then, if starting from cold, my imac starts in safe mode. I get the start-up sound; then the white screen with Apple logo; then the spinning sun; then the progress bar; then the grey screen with "safe mode" in the top right and user log-in (although I don't have log-in set in my options). Once running in safe mode I can shut-down and re-start; or just re-start and it will load properly. I have tried starting with mouse/keyboard on/off. Is this a Lion thing or what.
Info:
iMac (21.5-inch Mid 2010), Mac OS X (10.7.4)
I was using my macbook pro and suddenly it started crashing... I tried to restart it but it would take too much time, so i pushed the power button and powered it off. When i started my mac i got a kernel panic. *** is going on ? I restarted it 7 times, tried to enter safe mode holding the shift key but nothing
Info:
MacBook
Pro, Mac OS X (10.7.4)
My Macbook pro refuses to start up in 32 bit mode. At least as I believe so. When I go to "Apple > About This Mac > More Info > System Report > Software" It says "64-bit Kernel and Extensions: No" which leads me to believe (through previous research) that I am currently NOT in 64 bit mode and thus 32 bit. However in activity moniter it says everytihng is running in 64 bit mode, which to me, is quite confusing. I have tried holding down key's "3" and "2" during start up and I have tried the terminal command line for it ("sudo systemsetup -setkernelbootarchitecture i386"). Both to no avail.
Info:
MacBook
Pro, Mac OS X (10.7.4)
Is it better to boot in Safe Mode in Lion to repair permissions?
Info:
iMac, Mac OS X (10.7.3), iMac Late 2009
Ok... So, I have an extremely slow Time Machine backup. Many people do. I've gone through the motions and tried to resolve the issue by doing the suggested restart in Safe Mode. I even followed some of the other tips that are on this string: slow time machine backupÂ
Nothing has worked. I don't use Norton Symantec but I didn't the Norton Remove script through the Console already. I don't run any anti-virus software. Â
This started when I was backing up to at Time Capsule. I backed up to the TC for years before this started. I then moved to backing up (started fresh) to a external HD connected via USB.Â
I have a 2010 Mac Mini with OS X 10.9 (Latest Version)Â
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
My Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
View 3 Replies View Related