MacBook Air :: Only Boots In Safe Mode?
May 23, 2012Macbook air only boots in safe mode, and if I PRAM, the password for the mac does not work
Info:
MacBook Air, Mac OS X (10.7.4)
Macbook air only boots in safe mode, and if I PRAM, the password for the mac does not work
Info:
MacBook Air, Mac OS X (10.7.4)
Soda was spilled on the side of the notebook. It was never powered on. I opened up the notebook and cleaned all the components. Now the MBP only boots into safe mode.
View 4 Replies View RelatedToday, my Macbook Pro 15" started to automatically boot up in Safe Boot / Safe Mode. So every time I boot up, I have to wait 5-10 minutes and stuff. It's not normal.
I tried: Restarting, Shutting down and booting.
Resetting PRAM, NVRAM
Verifying and repairing Hard Disk in Disk Utility (it fails). Tried in Mac OS and OS Installation Disk. etc. I got this computer 6 days ago, and there is already this problem. Is there a way without reinstalling the OS? I have Windows installed on it for gaming, but I don't see anything else that could be causing the problem.
Upon start up, I hear the chime, see the grey Apple load screen, but then after it just reaches the blue screen and stops. Cannot reach login screen, unless in safe mode.Steps I've tried:
-Reinstall tiger (erase and install)
-Replace CMOS battery (time now works correctly)
-Run Apple Hardware Test (no errors)
I have a number of macs one being a G5 1.8 x 2 that has been running 10.3.9 for quite some time with no problems whatsoever. Decided to upgrade to keep in line with other macs but first just to 10.4. Machine only boots in safe boot mode. If regular boot, get message that I need to restart. Restart message reappears and often fans race. May have kernell panic but did hardware test, disk first aid and all hardware checks out fine. Finally downgraded back to 10.3 and machine works fine. Did total clean install with 10.4 again and same results. Is there a firmware I need to upgrade, I can't find one. I have been working with macs exclusively since 1989 (never user a "PC") but I'm perplexed.
View 4 Replies View RelatedI have a feeling I need a new motherboard to replace my graphics chip. I was playing World of Warcraft last night when the entire computer froze and a pink grid came over the computer. Could not force quit. About 10 seconds later, Kernel Panic screen and I have to hard reboot. Every time I reboot the pink grid is still there and it kernel panics, does not get past the spinning Apple logo. I was able to hold down shift and get it to safe mode, and was able to back up my files that way. I also ran the Apple hardware test, but it said no problems found. I am typing to you now in safe mode on this pink screen.
View 1 Replies View RelatedRandomly today when I started up my Imac I7... there was progress bar at the bottom much like if you updating your iphone... it then booted into safe mode...I restarted and it booted normal...
View 3 Replies View RelatedTried everything from archive and install (wouldn't read disk2 until the 9th try and ended up with 9 system folders). Then tried an Erase and Install. Still it refuses to boot. Get's hung up at the blue screen. Will only boot in safe mode. Now for the last few days even the startup chime is missing. Tried PRAM and NVRAM resets. no help. Won't boot from DiskWarrior boot disk either. Just hangs
iMac Specs:
Machine Name:iMac G5
Machine Model:PowerMac8,2
CPU Type:PowerPC G5 (3.0)
Number Of CPUs:1
CPU Speed:1.8 GHz
L2 Cache (per CPU):512 KB
Memory:1 GB
Bus Speed:600 MHz
Boot ROM Version:5.2.5f1
Serial Number:QP52604RSDU
I'm not sure what to do. I haven't tried resetting NVRAM/PRAM or the PMU/SMC, but are there other options I can try besides those?
View 1 Replies View RelatedI have an older style MBP, 2.2, running 10.4.3, and the other day after using it about an hour I put it to sleep. After another hour or so I opened it to use it again. Usually just opening it will wake it from sleep. It didnt so I tried pressing any buttons, no luck. Held the power button til it turned off. Tried to boot up but the screen stayed black and the sleep light went on, but did not pulsate. Tried that a few times with the same result. I also tried hooking up an external monitor, just got "no signal".
View 6 Replies View Related... and once started I then have to do a restart as the screen misbehaves by erratically scrolling between the desktop and the Launchpad. A real time waster!
Info:
iMac, Mac OS X (10.7.2)
I just go a new Macbook Pro 13' from my school (my school made it mandatory to get a mac this year) and I was installing some of my applications. Then I got the "You need to restart your computer" message. I restarted, and all i got was a blue screen with my pointer. Then after a while it says the same restart message. Also I have tried booting from the Snow Leopard Disk, but I get the same message before the actual SL installer comes up. I have been able to get the Macbook to boot in safe mode and I repaired permissions and the disk, however that does not seem to help. I have also reset the PRAM and that did nothing. I am running out of ideas... how can I fix this? I am using 10.6.4.
View 1 Replies View RelatedBeen having probs w Mac Pro w Lion seeming to hang on shutdown/restart. Have 'reopen windows' unchecked in prefs.  Was able to run through safe mode boot once but now seems to hang about 20% in everytime.  Have had to do shutdowns w power button (I hate that) or /by ctrl-option-command-esc Boot single user run rack -fy says 'apparently ok'Mount -uw / reports removed 10 orphaned or unlinked files and 10 directories?
Info:
Mac Pro, 2xDual2.66, 4GB, GeForce 7300 GT, 23" Apple LCD, Mac OS X (10.5), G4 Cube, Rev A/C iMac, NeXTCube,PwrMac8500,Quadras,SE30s,MacPlus
I have a 15" mbp with 10.6 Intel core duo, 4gb ram with a boot camp and ubuntu partition through parallels. The other day I was installing xcode from apple's website, which failed 3 times after downloading saying the package couldn't be expanded. I left my computer for a while and came back where i then had to log in again. it rejected my password numerous time (i'm positive it was correct). when i restarted my computer i got a kernal panic screen when the apple logo came up. it told me to restart the computer which i did. didn't work. i restarted with the osx cd to use the disk utility. when it checked the drive it found a bunch of errors, which i then tried to correct. it went for a couple minutes then told me they couldn't be fixed and i should try to back up my data and reinstall osx. i don't know how to back up my hard drive when i can't log into my account. i've tried to boot in target disk mode and copy some files that way, but the only disk the other computer sees is my windows partition- no mac partition.
i've also tried these, none of these have worked: restarting in safe mode resetting the ram and pram booting with different sticks of ram all result in a kernal panic.
my windows partition still works fine though (as much as i hate to say it) the only things I really care about on my computer are my files from school and my itunes library. is there any way i can get these files off my computer?
My iMac24" can't booting in normal mode, but booing in safe mode only.
how to boot up in normal mode. If I restart the system, it is showing the apple logo and not going to Finder.
Info:
iMac, maverics
My Mac Pro main boot drive us encrypted. I booted into recovery mode the other day & it wouldn't let me boot back o my main drive. Now upon start up I can't enter either recovery mode nor safe mode nor chose the main drive to boot from. I'm absolutely stymied in what to do.
View 3 Replies View RelatedI have been unable to restart me computer after a software update (White screen/apple logo/spinning wheel continuously). I have tried to start up in safe mode (holding down shift key) but it hasn't worked.
Info:
MacBook, Mac OS X (10.4.6)
I recently bought a 15" powerbook and when you turn it on it shows the apple logo (grey screen) then when booting into Tiger, it shows a black screen with white text detailing drivers and things that are being loaded. Is there any way of switching off this black screen booting? I have even tried swapping harddrives and reinstalling Tiger but it still does it, so im guessing it has nothing to do with the Tiger installation / Harddisk.
View 1 Replies View Relatedmy computer wont run in regular mode. The problem occurred when I was changing my resolution and I pressed the wrong one. The screen went blank so I restarted, then the screen turned black after the apple logo. Now I can only run in safe boot. Is there any way to change the res. for the regular boot in the safe boo mode?
View 1 Replies View Relatedi need help cause my brother logged in to the guest mode and since then it goes to guest mode automatically with out giving me the chance to log in the only way i can get back in to my account i have to hold the shift key down at boot, yet when i let the mac boot up normal way it goes straight to that safari web browser.
Info:
MacBookPro, iOS 5.1
So here the whole story of what I think is relevant to this problem.I tried to install a small program that can read and write NFTS.After installing it needed to reboot my computer.During the reboot my computer shut down before the things were completely installed.My macbook Pro (mid 2009) rebooted and immideiatly stated that the time and date was set to jan 1st 2008.When I tried to adjest this in preferences > time and date the preferences pane did not respond after opening it.I tried to restart my computer again.But now it will only start in Safe mode.
[code]...
Info:MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
As of yesterday my Mac book pro will not start up. It will not go past the gray screen with the apple and spinning timer indicator. When I try and start up holding shift to enter safe mode it will not start up either. I have tried turning It on and off many times. I am not sure what to do or what the problem might be. Running OS 10.7.
View 3 Replies View RelatedWithin a short space of time of booting up my main software that I am using (e.g. Mail, iTunes) hangs with the spinning beachball. If I reboot into Safe Mode then all works OK, if slowly. I have reparied disk permissions but the problem recurrs once I reboot. What else can I try to do?Â
Info:
Mac OS X (10.7.4)
MY MBP is giving me the "NOT" sign on start-up. This comes after initially displaying the Apple logo. This MBP had a new logic board installed by Apple just two weeks ago -- and I know I can take it back but I'd like to fix this myself. I put in a different hard drive after getting the MBP back. It has worked fine for several days. Don't know if these points are relevant, but:
1. First thing I noticed today is that neither of the USB ports would read a flash drive. The port would, however, work mouse and keyboard.
2. The initial non-boot episode took place when I had external hard drives daisy-chained in via Firewire. But, again, this had worked previously, as recent as this morning.This may be significant:
3. The last tasks performed on the MBP were -- for the first time -- to edit video in FCE, make DVD in iDVD, burn IMG file.
4.I have connect this MBP as a target FW drive to another MBP and run "disk verify" and "disk repair" in Disk Utility. It says the drive and permissions are okay.
5. I have booted to a copy of Disk Warrior (latest version, version 4, I believe) and rebuilt directories and files along with verify/repair permissions (everything DW will do). And when re-starting, it still won't boot.
6. When I boot off Snow Leopard DVD and run Disk Utility¦"verify disk" says "the volume appears to be ok¦.when I "repair disk" it reports "Volume repair complete." and "Updating boot partitions for the volume as required."
7. I'm able to boot in SAFE MODE, but when I try to restart in normal mode, it won't boot (so nothing was automatically fixed)What can I do in safe mode to address my problem?
Info:
MacBook
Pro, Mac OS X (10.6.8), A1260 2.4GH 2GB Ram 750GB HD FCE4
OS X 10.9.3 2.53 Ghz Intel core duo 4 GB 1067 MHz DDR3
MacBook Pro 15" mid 2009
Issue-will ONLY boot in safe mode
Background-previous keyboard issues caused by spillage. 3rd party keyboard in use
Action taken - recent 3rd party apps deleted: First aid disk utility checks okay (perms & disk)3rd party keyboard was working fine until 2 days ago.
I have a week 50 machine with the firmware update that flickers only when Snow Leopard is in 32 bit mode. If I boot into 64 bit mode (holding 6 & 4 as the machine boots) it does not flicker. Can anyone else confirm this?
View 7 Replies View RelatedI have a Macbook which just reboots constantly, you see the apple, the little whirly graphic that tells you it's starting up, then off it goes, chimes again and the same thing over and over again. I can't start up from the Install disc, it just keeps rebooting, I've zapped the PRAM not made any difference, won't start up in safe mode either. I've run disk uitility on it from another mac (Target Mode) but it said the disc didn't need repairing, and still it keeps on re-booting, over & over & over....
View 1 Replies View RelatedI am running OSX Lion latest version on my Macbook Pro 4,1 and can't get the thing to boot from any source. Always get's stuck at the grey screen with apple logo. Have tried all the following...
- Straight Boot (power on)
- Boot via Recovery HD (hold option on bootup then select)
- Boot via Safe Mode (Holding Shift on bootup)
- Boot via Safe Mode Verbose (Shift, Command, V)
- Boot via bootable Lion USB Key (Hold option, and choose the USB drive - not the same USB key works on my other macbook pro)
On every one (except verbose) it just get's stuck on the grey screen with spinning timer thingy. I have done PVRAM reset, SMC reset and have reseated the RAM and all to no avail. I'm pretty sure the problem was caused by removing battery at wrong time (device not responding after sleep mode started and I plugged in power - should have been more patient!)
I have a Time Machine backup but it's a bit older than I thought and very much want to get my newer photos off it before rebuilding - not that Time Machine would work in current state anyway. So what are my remaining options? Will I have to open it up and remove the HD as next step or is there anything else left to try? Can I remove the HD and connect it via a USB caddy to my existing Mac to recover info (hard drive spins and sounds ok to me)?
Info:
MacBook Pro, Mac OS X (10.7.3)
I heard someone talking about this "Safe Mode" and I thought it was an interesting feature in MacBooks and all I have to do was press Shift. I tried that and to my surprise, everything is slower. I tried to swith spaces and the wallpaper renders pixel per pixel on my screen. This never happened before. It's so slow! It has never been this slow before. I was curious if everything was really slower or it's just me so I fired up Geekbench. The results were staggering. 1280 points. A Power Mac G5 is faster than that. Even the Mac mini from 2007 is faster than that! This MacBook SHOULD be 3695! This is really amazing in a bad way. And other than that, I didn't really notice any difference at all from Safe Mode and Normal Mode.
Info:MacBook, Mac OS X (10.7.3)
My 2011 17" MBP won't with OS X Lion won't start up in safe mode...
Info:MacBookPro, Mac OS X (10.7.4), 2011 17" MBP with 8 Gigs of Ram