Hardware :: Screen Turned White Suddenly - Every Thing Is Working On The External Screen?
Mar 27, 2009
i had the macbook Core 2 Duo for About 8 months and it was working great.
yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!
i had the macbook Core 2 Duo for About 8 months and it was working great.yesterday i left a file download in firefox for 5 hours then went back to check on it , it was working FINE, Then i got Back after 2 minutes and the screen is suddenly white and not showing anything!i shut down the laptop and restarted , there was a chime and just white screen...i connected the laptop to an external monitor AND EVERYTHING IS WORKING on the external screen but the laptop screen is white!!!i tried resetting the PRAM and i tried resetting the SMC twice but nothing Changed
I just got my IMac. I have no clue what happened it was working fine. In the morning when I turned it on it just went blank turned on to a white screen with an apple on it and nothing else is happening.
i was working on my macbook pro and suddenly the screen went white with lines through it. i tried a reboot and after the Apple icon shows screen goes white and does nothing.
i was on wireless so wen back and connected through wire and left over night in case it was heat
i have a MacBook Pro..I had my track pad replaced recently..I am not sure if it has anything to do with my screen, however, the screen is randomly turning gray and white with lines and fading out..What does this mean
The day after I installed the update(10.10.1) for Yosemite, regularly my iMac suddenly stops working by showing a white screen. After 10 seconds, the iMac reboots automatically and again shows a white screen. Than, it stops. No action. No noise. I'm always obliged to stop the iMac by pressing the start button and restarting by holding the 'shift' key otherwise I have to look at a white screen again! In the save modus, I can work(typing this story) and restart the iMac. After a while, the whole show starts again. What can I do? Installing Yosemite again and whiteout the update? Can I undo the update? This once, I made no backup before the update(Murphy's law).
So my 20" 2.4 Imac crashed on me twice tonight. A box popped up telling me to hold down the restart button for several seconds to restat. The second time I did this it just sits with a white screen and give three loud beeps over and over. Is there a fix for this? Is it my ram? I'm at a loss.
My step mom has an iMac. The first gen intel one and the other day out of nowhere there was a white screen with a folder on it and now when you go to start up the iMac the screen just stays white.. What would be the cause of this and what should I do to fix it .. thank you
I dropped my Macbook while in the hospital yesterday recouping from spinal surgery now I am really pissed! So when I power it on I get a grey screen with the apple logo and the hard drive making uncommon noises. It never makes it to the password screen, what can I do? Help me please as having this terribly bad back is one thing but losing my Macbook too with all my Logic music etc is really decimating. Thanks guys....
I just acquired a G4 MDD Power Mac. Dual 1 Ghz processors.I pulled the HD out of my older g4, connected it, and powered the machine up. The HD has OSX 10.5 and works fine in the older G4.
The first thing I notice is that the Small fan (in the door) is spinning, but the Large fan under the Power Supply is NOT. The red light on the Motherboard is on.
What happens is that all I get is a white screen, with the Apple Logo, and the spinning circle. it never acceses the hard drive and boots into 10.5 What does this point to? I hope the Dual processors are not the problem here. But that large fan not spinning worries me.
I have had my Powerbook G4 for a few years now and everything has been working well. When I turned it off yesterday everything looked normal. But when I turned it on this morning, everything was huge. All the tool bars, the screen,, everything is blown up. This is really inconvenient and hard to read... how can I return my Mac to normal and make everything small again?
I have an 17" MacBook Pro which works fine apart from the screen going blank. It seems to happen mostly when running videos which also causes the fan to run faster.
An SMC reset seems to be the only way to get it working again.
lately, my mba has been behaving a little weirdly. its screen would suddenly become a little dimmer when the brightness in the room has not changed a bit. after a long while(15 min?), it'll turn brighter again by itself, and again without any change in the lighting of the room. the change is not big but obviously. any idea? can it be some software? or setting? or a defective light sensor?
I just installed an update on my macbook, but once it completed, it got stuck at the blue loading screen with the swirling thing for more than 10 minutes (I started to pay attention when I noticed it hadn't booted up faster, so I'm not exactly sure how long it took). It eventually restarted itself though. It's happened once before, but I did what I use to do on my old windows laptop and just held down the power button until it powered off, let it sit for a little bit, and then booted it back up. It worked just fine.
My question is, is anyone else having this problem and is there a fix? Is this something I need to be worried about? Did I somehow mess something up by powering it down and back up before? Forgot to mention what macbook pro it is (if it matters). 15in MBP, OS X 10.6.4, 2.4GHz Intel core i5, 4G RAM...
there are two things that the macbook is doing to me. one is that sometimes when i move the screen up or down (the hinge is rather stiff) a white (thin) line flashes across the screen. but recently, while randomly browsing through the internet, the screen almost... i guess faded to a gray screen, but like gradually, and not like a kernel error, like the display just faded away. happened twice in a row, did a battery pull and now wont do it again.
My screen just started to occasionally have a flicker of a white line show up...It doesn't happen that often, should i worry? Is it worth taking it into apple? (Under warranty still) Since its not consistent i wont necessarily be able to show them what its doing..
My mac screen is frozen with white fuzzy lines going across the screen. I shut it off and turn it back on but it still remains white fish lines on the start up screen. I've tried revolting it, it works sometimes but now its stuck at the starting screen. I have been at this for 2 hours to try and fix it but nothing has changed about the screen.
I've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick, that I can see best behind an all white screen, i.e. a blank page of a word processing document.
I've begun to notice a ring, roughly three inches in diameter, in the middle of my Air, Rev C, Screen. It is a white ring, a couple of millimeters thick,that I can see best behind an all white screen, i.e. a blank page of a word processing document.
Anyone seen anything like this before. I can actually see part of it right on the white of the page I am typing in this thread.
When I go to front row, all my video content plays sound, but the picture is just a pure white screen (shows the slider to move chapters, etc., but the screen is just white).
Any ideas for solutions? I did google searches, etc., to no avail. I have a MP (not early 08), which I upgraded the graphics card to a 2600XT, and it's running Leopard.
Is it possible to somehow capture a screen from iMac 27-inch and while it is used as external display (display for Xbox 360 - I have Kanex XD HDMI converter)?
I have a MacBook Pro 13 for portability to my classes at the university and a Dell 2209WA as an external monitor. One of the few good IPS monitors I could find around for cheap.
The monitor works fine in mirror mode with the MacBook Pro, but as an external display only it does not work. It attempts to wake up and then you see power savings mode again and the screen goes black as if there was no connection. Not sure what exactly the problem here is. Drivers?
The monitor works great with a Mac Mini I have and it works great in mirror but not in external display mode(the lid of the MacBook Pro closed). Anybody know of this issue? The cable is good and the MacBook Pro is not that old(a few weeks).
I just upgraded my MacBook with a larger hdd. But I forgot to put the plastic tray thing back on and the hdd is now stuck. How would I go about getting it out? I really don't want to have to take the laptop apart and it's not under warrenty.
My iBook will not display anything on its screen. Rather, it just remains black. One time, the screen did come on, but then shortly after booting, it flickered a lot and then went black again. A year ago, something similiar happened and when I took it to be serviced (when I had AppleCare), they had to send it away and have a new logic board installed. Now this machine is out of warrenty and and I am not sure what to do, or even if it is the same problem. Any suggestions?? Thanks!
I have a problem with my MacBook screen. Everytime I try to turn on the MacBook, the blue screen appears for a second and then everything gets dark (but I can see that the computer turned on normally, it's just the screen that gets almost black, without light). Sometimes only the right side of the screen is blue and then gets dark just like the left one. I was looking for the problem and I perceived that the left side seems to be loose and I can't fix it. What should I do?
I have a 2007 imac and my esc button does not work. I was watching a video on full screen but the vid had no option to exit full screen so i jus kinda went crazzzzzy on the keyboard and my screen turned FLUORESCENT..wtf? i restarted, rebooted, shut down but still having the issue.
Just got an iMac yesterday. Today when I turned on the iTunes screen saver, the screen turned black, and wouldn't respond. I held the power button for several seconds until it turned off, and then turned it back on. Everything was ok until I went to configure the screen savers. As soon as I picked the first one, the preview screen turned gray, and the wheel started spinning. I used force quit on it, and tried loading a different screen saver, and same thing happened.
I press control + shift + eject on my new imac, and the screen turns off as promised. However, most of the time, actually, almost every time -- the screen comes back on after a second or two.
I turned on the MBP today (Mid-2007 Santa Rosa) and everything was going fine- until the screen started to jump! Literally the whole display bounces constantly, revealing a white line at the top of the screen (as if trying to center the screen or something). This is on the LCD- haven't tested it on a monitor yet. I just had my logic board replaced about 4 months ago for a faulty 8600GT chip- I'm so hoping it's not that.
