Hardware :: (Snow) Leopard Installation On Mac Mini (Intel Core Solo)?
Jul 3, 2009
In a few weeks time I'm getting my Mac Mini upgraded to 2GB memory for Snow Leopard when it comes out. My Mac Mini is a 2006 Intel Core Solo model, and in September I'll be wanting to buy Snow Leopard but I want to be 100% sure that my Mac Mini will be able to install Snow Leopard since its DVD media. I know I can't burn DVDs with this Mac Mini but, although may seem like a stupid question will I be able to install Snow Leopard with it being DVD media.
My old Mini is in the next room to the wireless DSL modem. It gets one to three max bars, usually two, and it's just through one interior wall. I don't want to spend a bunch of money, I just want to get a little better reception in the next room. I have seen USB wifi antennas advertised. Would that do anything for me? My iBook G4 in the same spot gets full reception no problem.
I'm thinking about splitting the cost of a family pack with a couple friends and want to know what you all think about running Snow Leopard on a 2.16 Intel Core Duo Macbook Pro with 2 GB of ram and 100 GB HD. Will it be run smoothly and correctly? Has anyone done this? Any info will be greatly appreciated!
I have the following system spec on my Macbook Pro which i bought in Apr 2006:
2.16 Ghz Intel Core Duo 2 G 667 Mhz SDRam
I would like to know if Snow Leopard will run on my system. I have been getting a few glitches for the last while when running internet related searches for certain sites like Youtube, and sometimes with streaming video. I figured that maybe i need a more up to date OS as i've been a bit slack with updating it.
My brother has the first generation of the iMacs that has a Core duo processor (not Core 2 Duo). Will snow leopard work on it? On Apples site, it says that you need a Intel processor to run Snow leopard, but then below it says you need a 64bit processor which is what he doesn't have.
Aperture 3 runs as a 64-bit application on Mac OS X Snow Leopard on Macs with Intel Core 2 Duo processors.Does that mean that Aperture 3 won't run as a 64-bit app under OSX.6 on quad-core machines (like the top-of-the-line i5 iMac)? They can't be serious!
Recently installed Snow Leopard. Mail not working. Tried to update Mail but Destination Selection portion said, "Mail Update can't be installed on this disk. This volume does not meet the requirements for this update."
My brother has the first generation of the iMacs that has a Core duo processor (not Core 2 Duo). Will snow leopard work on it? On Apples site, it says that you need a Intel processor to run Snow leopard, but then below it says you need a 64bit processor which is what he doesn't have.
Question: I already have snow leopard installed on my iMac. But can I still do a CLEAN snow leopard installation onto my imac even though snow leopard is already installed?
I tried it just now like twice but I got the spinning wheel of death. It wouldn't go pass the apple sign and spinning wheel.
Here's the deal: I have the most recent 17" UMBP, purchased last August, 2009 and got the Snow Leopard Up To Date Disk, did an install on my stock Hard Drive and have been VERY happy with everything for the past few months.
But... All these threads championing the latest Intel SSD G2 have finally gotten to me and, I just purchased the 80GB model from Newegg. It should be here tomorrow.
Now, I ask that you confirm, a specific question about installation from my UTD disk and then advise.
note that I've searched a ton about this subject. It's been answered in so many conflicting ways, I'm running it by you guys once again.
So then, it seems that I can NOT install Snow Leopard from my UTD disk onto the new, fresh Intel SSD installed into my 17" UMBP. This is the case, yes?
A workaround, I figure, would be to install Leopard 10.5 onto the new SSD and then to a clean and erase and then instal of 10.6 on top. I assume the UTD will read 10.5 and let the upgrade proceed.
So, finally, a question: Should I be worried about installing a total of two OSs given that I (cheaply!) opted for the smaller 80GB SSD and that 10.6 doesn't support TRIM?
I experienced what I believe was a crash so after various attempts at doing a time machine restore, I performed an erase of the HDD and have been trying to install snow leopard from a disk I bought from the Apple store. I am not sure if the disk is the whole OS X or not as it was purchased to upgrade from the OS X that was on the machine. I am hoping to do a time machine backup to get my old programmes/software back afterwards but in the meantime just cannot seem to get snow leopard on my iMac.
I just tried to upgrade my iMac to snow leopard (10.6.3) from cd.It remains stuck on the start page since hours : white page with grey apple logo and no spinning wheel or progression bar.
I bought a Mac Mini on ebay and it came with snow leopard already installed. Its been working great but today, i decided I want to swap the 80gb drive for the old 320gb drive from my laptop (the laptop got a shiny new SSD). Problem is, when i try to boot from the 10.6.2 install disc, it says that snow leopard cannot be installed on this Mac. Any way i can get it to install Snow Leopard on the new drive?
Also, I tried running the installer on the old HDD from inside the old Snow leopard install and it also said that it could not install snow leopard. It then asked me to restart and kept attempting to install Snow leopard and failing.
specs of Mac mini: -Model Identifier: Macmini1,1 -Intel Core Duo 1.83GHz -1Gb 667MHz DDR2 RAM -4 USB ports
for the record, i think the guy i bought it from bought a new mac mini and just included the discs that came with the new one in the one he sold me. The instruction manual shows a mac mini with a mini display port. The only OSX disc i got from him was the snow leopard one. also, if it matters, this mac mini is the only mac computer that I own.
are the early models of Mac Mini Intel Core 2 Duo made in 2006 and 2007 (for instance, Core Duo 1.66 GHz, or 1.83 GHz, or 2.0 GHz, with 2GB RAM) compatible with Mac OSX 10.4.11 Tiger?
Can I run Mac OSX Classic environment on a Mac Mini Core 2 made in 2007?
In the interest of energy savings, I think it would be great to be able to use switchable graphics on my Intel Core i7 Mac mini. Since the i7 chipset has the Intel HD3000 GPU onboard, this should be possible, but it would probably require some sort of hack or modification to the EFI. I've searched around online but only find mention of using both Intel HD3000 and discrete graphics with a Hackintosh.
I've got a 1.83 GHz 17" iMac and for all intents and purposes it fits the "Intel Processor" requirement for Snow Leopard but it isn't a true '64 bit' processor(?) like the later Intel chips... anyone installed the new OS on a similar machine and can report any major differences in speed (or not)?
I have an Intel Mac mini (purchased in 2005 or 2006) with a fresh install of OS X Leopard on it. I recently changed the Startup Disk in the OS X system preferences to be the CD/DVD drive, and everything has gone downhill since there.
I inserted a CD and attempted to boot from it right after changing this setting. I noticed the CD drive spun up the disk, but after waiting several seconds a black screen appeared, saying "No bootable device — insert boot disk and press any key".
There were two problems here: first, the CD never ejected from the computer, and second, there was no response to any key press.
After restarting and shutting down a few times I got the Mac to spit out the CD somehow. I restarted, inserted the same OS X Leopard disk used to install the operating system earlier that day, and got the same "No bootable device" error.
I have the very first generation intel core duo macbook pro 2.0ghz Yonah core. can someone confirm snow leopard work/doesn't work for this cpu please? confirm means you install it successfully, or failed to install. I already seen the requirement documentation.
Will it run on my iMac? Is it a good idea to install it on this machine? If so, I may have something wrong going on. When I try to install it says it won't run on this computer!?
So I've only had my macbook pro aluminum body for about 4 months and after downloading the new system update, my laptopl just started acting weird and then it would just keep freezing with the pinwheel for extended periods of time. I've decided to verify and repair the disc, but to no avail, it didn't help. So, I backed up files in an external hard drive and erased my disc. However, after repeating to reinstall Snow Leopard at least 10 times, it keeps on telling me that it has failed to copy supported files. If I eject my installation DVD, it will just show up with a gray screen that has a folder and a question mark on it. I'm not sure what to do. I feel like I should take it over to an Apple store to consult with a Genius...but it is far from where I live. Any easy step to step advice on what I should do?
I've installed Snow Leopard but now my mac won't start up. (It's a early 2008 mac pro so it should be able to handle it). All that happens is it loads past the apple logo, the rainbow wheel pops up, the background loads and the search icon (magnifying glass) appears but nothing else at all beyond that. It just waits for ages (a few times that note has appeared that say's I need to restart the computer).
I've tried. 1) Re installing it 2) Reinstalling it on a different partition (that had windows on before) but nothing seems to work. I really need to keep all my data so I want to be careful.
So I had an aluminum 2008 unibody macbook. I replaced the hard drive with a 320gb and it has leopard on it. I damaged it and had to get a new mac. I now have a white unibody mac. To copy every thing would be a pain. I'd rather use snow leopard. What I want to know is if I can use the reinstallation disc 10.6 that came with the white macbook to upgrade my 320gb leopard hdd to snow leopard?
I bought a used MaxBook (2,0 GHz Intel Core Duo , 2 GB RAM, 80GB HDD) and try to install 10.6 Snow Leopard (Family License).The MacBook HD doesn't have any data on it, as the pre-owner completely cleaned the HDD. I put the SnowLeopard CD in the CD-Drive and press the C-Button during booting and start the install process according to the dialog that shows up.The installation starts and shows me in the beginning it will take 34 minutes to install. The process continues till the countdown shows 28 minutes’ and then the installation process freezes. I only here some repeating noise from the CD-Drive but nothing happens. I tried this process now several times, I was waiting for hours that the install may continue, but no success so far.... Does somebody have any idea what I could do install 10.6 successfully? I don't think it's a license issue, but I want to add that I also own a MacMini and with the same install CD was successfully installing 10.6 on the MacMini.
My one week old iMac 2.7GHz Quad-Core Intel Core i5. first started problems by not goping to sleep even when I forced it.
I shut it down using the shut off button and unplugging it from power for more than 5 munites.
I turned it back on, it does the usual startup chime and then gray screen. I have restarted twice from the shot off button and still getting the same result.
Lion is causing me so many problems my macbook is almost unusable now... Is it possible to install Snow Leopard in Lion's place? Or does this hardware not support older Operating Systems?
