My brother has the first generation of the iMacs that has a Core duo processor (not Core 2 Duo). Will snow leopard work on it? On Apples site, it says that you need a Intel processor to run Snow leopard, but then below it says you need a 64bit processor which is what he doesn't have.
View 3 Replies
I have an iMac G5 (circa 2005) with a non intel processor, I recently purchased Snow Leopard to update this, however it advised I need an Intel Processor to install Snow Leopard. Is there a way of getting round this, the main reason being is I want to use the Magic Trackpad - but ive been told this will only run on Snow Leopard OSX? If anyone could answer this asap I would be grateful, today is the last day I can take back Snow Leopard and the Magic Trackpad to the Apple Store for a refund.
View 4 Replies View RelatedHas anyone tried to upgrade their old iMac G5 with a new Intel core Duo processor? If so how do I go about installing one?
View 6 Replies View Relatedthe Westmere-EP vs. The i7-980X? It looks as though the Westmere-EP is pretty much identical to the i7-980X so why use the Westmere in the Mac Pro vs the i7http://ark.intel.com/Compare.aspx?ids=47917,47932,Name1. Intel� Xeon� Processor W3680 (12M Cache, 3.33 GHz, 6.40 GT/s Intel� QPI)2. Intel� Core™ i7-980X Processor Extreme Edition (12M Cache, 3.33 GHz, 6.40 GT/s Intel� QPI)
View 3 Replies View RelatedI need to install Lion to move from mobile.me to icloud, but my imac has an Intel Core Duo processor. Can I upgrade to Intel Core 2 Duo?
Info:iMac, Mac OS X (10.6.8), Lion Upgrade
I recently purchased a Mac Pro and it's awesome. BUT I wanted to know is it possible to swap out the processors for maybe 2 quad cores or even 2 3.0 GHz processors and if so, how would you do it? Is this possible? (pictures of the motherboard are attached)
View 7 Replies View RelatedApple keep telling me I need to update to icloud but I'm not sure if Lion will work on my Mac. I've upgraded to snow leopard which seems to have knackered my .me or .mac account (whatever it's called now), so I don't seem to have any option but to upgrade to Lion if I every want to see my emails again. Apple say I must have a Intel Core 2 processor for Lion to work. at least I think that's what they say. I have a mac book pro, 2006 with an 2.16 GHz Intel Core Duo processor, can I update to Lion?
Info:
macbook pro, Mac OS X (10.4.10)
I'm thinking about splitting the cost of a family pack with a couple friends and want to know what you all think about running Snow Leopard on a 2.16 Intel Core Duo Macbook Pro with 2 GB of ram and 100 GB HD. Will it be run smoothly and correctly? Has anyone done this? Any info will be greatly appreciated!
View 5 Replies View RelatedI have the following system spec on my Macbook Pro which i bought in Apr 2006:Â
2.16 Ghz Intel Core DuoÂ
2 G 667 Mhz SDRamÂ
I would like to know if Snow Leopard will run on my system. I have been getting a few glitches for the last while when running internet related searches for certain sites like Youtube, and sometimes with streaming video. I figured that maybe i need a more up to date OS as i've been a bit slack with updating it.
Info:
macbook Pro, Mac OS X (10.4.11), None
is it possible to switch processor apple power pc to the Intel processor?
Info:
PowerBook, Mac OS X (10.5.1)
Am I able to up grade to Lion with a Dual-Core Intel Xeon Processor installed in my Mac Pro
Info:
Mac Pro, Mac OS X (10.6.8)
My brother has the first generation of the iMacs that has a Core duo processor (not Core 2 Duo). Will snow leopard work on it? On Apples site, it says that you need a Intel processor to run Snow leopard, but then below it says you need a 64bit processor which is what he doesn't have.
View 5 Replies View RelatedMy 5 year old iMac has a 2.16 GHz Intel Duo Core 2 Processor with 1 GB of Ram. I'm running OS X 6.8 and am told that I can't upgrade to OS X 7.My only connection to the internet is through a MobileMe AirPort. I have not ethernet or firewire connection.Without OS X 7, I can't access iCloud. How do I stay connected to the internet after June 30, 2012 when MobileMe is discontinued?
Info:
iMac, Mac OS X (10.6.8)
Aperture 3 runs as a 64-bit application on Mac OS X Snow Leopard on Macs with Intel Core 2 Duo processors.Does that mean that Aperture 3 won't run as a 64-bit app under OSX.6 on quad-core machines (like the top-of-the-line i5 iMac)? They can't be serious!
View 5 Replies View RelatedIn a few weeks time I'm getting my Mac Mini upgraded to 2GB memory for Snow Leopard when it comes out. My Mac Mini is a 2006 Intel Core Solo model, and in September I'll be wanting to buy Snow Leopard but I want to be 100% sure that my Mac Mini will be able to install Snow Leopard since its DVD media. I know I can't burn DVDs with this Mac Mini but, although may seem like a stupid question will I be able to install Snow Leopard with it being DVD media.
View 7 Replies View RelatedContrary to belief, Snow Leopard by default (except for Xserves) runs in 32-bit mode. Check for yourself.
Code:
uname - a
You should see something similar
Code:
root:xnu-1456.1.25~1/RELEASE_I386 i386
I forced it to 64-bit on my '08 Mac Pro and things were slower! Spaces was very slow. Dashboard was quirky. I say avoid it.
It appears that for whatever reason, the kernel on my Mac is 32bit/i386, but the architecture is 64bit:
Darwin system.local 11.3.0 Darwin Kernel Version 11.3.0: Thu Jan 12 18:48:32 PST 2012; root:xnu-1699.24.23~1/RELEASE_I386 i386
Though the kernel itself is a universal binary:
mach_kernel: Mach-O universal binary with 2 architectures
mach_kernel (for architecture x86_64): Mach-O 64-bit executable x86_64
mach_kernel (for architecture i386): Mach-O executable i386
Info:
Mac Pro, Mac OS X (10.7)
I recently installed Snow Leopard. It works faster than before and it gave me 8GB of space back. But, after looking through Applications in system profiler, I found out iTunes is not 64-bit unlike Safari and other native applications that have been re-written to 64-bit. I remember Apple said iTunes is also re-written. I must download a new version or it's included in an update (I'm waiting the 10.6.2 update to download at the moment)?
View 9 Replies View RelatedI tried to boot my mid 2009 macbook pro running snow leopard into 64 bit mode by holding down the 6 and the 4 key on the keyboard after shutting it down and then powering it back up again, it won't start up, it's stuck at the apple symbol with the rolling cursor
Info:
MacBook Pro
Model Name:Â MacBook ProModel Identifier:Â Â MacBookPro3,1Processor Name:Â Â Intel Core 2 DuoProcessor Speed:Â 2.4 GHzNumber Of Processors:Â 1Total Number Of Cores:2L2 Cache:Â 4 MBMemory:Â 8 GBBus Speed:800 MHzBoot ROM Version:Â MBP31.0070.B07SMC Version (system):1.18f5Â Â
I know this has been asked numerous times, but most of the answers I found were old and archived. I was wondering whether or not an update or a guide has been released which allows a successful boot into 64bit kernel? Â On a side note, I have verified my computer does have EFI64. However I know in the past that this stil didn't enable a 64bit boot.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
My attempts to install Mac OSX 10.6 on iMac MC309 bring always the same result - kernel pamick. What I did was:1. insert DVD Snow Leopard Install Disk, reboot and press ''C' - kernel panick;2. reboot into Recovery Mode, open Disk Utility, erase  the preinstalled Lion completely, format the disk as Mac OS Extended (journaled). Then try to reboot  into DVD  Mac OSX 10.6 install disk: kernel panick.3. In Disk Utility go to restore tab, use DVD install disk as source and use my disk as destination, hit restore. When trying to reboot kernel panick happens.
Info:
Apple iMac MC309, 4 core
Why doesn't LightScribe work with my Snow Leopard? It downloaded and is in my printer folder, but won't open.
Info:
Mac OS X (10.6.3), HP LightScribe
Whether anybody got Snow Leo build 10A380 (WWDC'09) successfully running with 64-bit kernel? If 'yes' - please share your method. I've tried every approach that i know: "6+4" keys, arch=x86_64 flag specified for both nvram and com.apple.Boot.plist, lipo command against mach_kernel.
View 24 Replies View RelatedI know by default that Snow Leopard starts up in 32-bit kernel but anyone here boot into the 64-bit kernel? I think to do this you'd have to hold down 6 and 4 keys while booting.
By now almost all 3rd party apps are running 64-bit and all this time I've totally forgot about the 64-bit kernel!
I've just booted up to 64-bit kernel and all apps load instantaneously!
So, with Snow Leopard, there is a 32-bit kernel, and a 64-bit kernel. Correct?
As I understand it, it will boot into the 32-bit kernel by default, but if your hardware is supported, you can select the 64-bit kernel.
My question is - where is the list of supported hardware, and how do you select the 64-bit kernel?
My confusion comes from several posts and various articles which all say the first-gen aluminium iMac has a 32-bit EFI, and therefore can only boot into the 32-bit kernel. But I've just downloaded an app called Startup Mode Selector, which shows you your system config, and it says I have a 64-bit EFI.
My main Mac is a Intel Core Duo Mac mini which is not 64-bit. Snow Leopard is known for being 64-bit OS. Will it run on a 32-bit machine?
View 2 Replies View RelatedI was just wondering if i bought the imac with a 2.5ghz quad core processor if apple could switch out that processor with a 3.4 ghz quad core processor. I understand apple makes it easy for the user to add extra ram and i will be doing that within the first week but id like to have a more powerful processor without paying 1,999 for the 27in 3.1ghz
Info:
iMac
I've been running some deinterlacing jobs with Compressor on our Mac Pro 3,1 dual processor. We'd added some RAM so I was interested to have a look in Activity Monitor to see how it was faring and noticed that the CPU activity never went above 50%. I find it very hard to believe that Compressor isn't intended to take advantage of both processors.
View 10 Replies View RelatedMy 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can I fix this? I have tried:
• safe mode reboot
• restart using p, r , command and option (resetting the pram)
• restart using the original Mac OS 10.4 disc
• restart so I get the image of the HD but I can't click on it to continue and restart again!    • single user mode (CMD+s keys at bootup, and then /sbin/fsck -fy)Â
It just doesn't do anything else than display the grey screen, the apple and the spinning wheel (sometime, I do get a scrolling bar also!). I managed to perform a hardware test from the Mac OS disc and there seems to be no hardware problem. Nothing works.It stays stuck on the grey screen, with the apple and the wheel turning endlessly.Â
Info:
iMac, Mac OS X (10.4)
Where do I switch graphic processors in Snow Leopard on my late '08 uniMBP?
It used to be in the "Energy Saver" area but, I had to log out and then back in again to activate the change. Is there something I'm missing here?
