Lion is causing me so many problems my macbook is almost unusable now... Is it possible to install Snow Leopard in Lion's place? Or does this hardware not support older Operating Systems?
Info:
MacBook Pro, Mac OS X (10.7), Darbys -
The ivy bridge processors are coming out soon (or may already be out). I have heard that macbook pro 13" models might be able to use the new processers due to their lower energy useage. I presume that I will be able to take my mac to an apple store and have it installed. Is this information true?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
I seem to have a lot of overheating since installing on my pro tower. the fan runs constantly. additionally, the monitors go to sleep on their own and I can't wake them back up. does LION OS fix this or am I doomed?
Info:
Mac Pro, Mac OS X (10.6.8)
I've tried installing Leopard on my G5 quad core (Intel cores) that was running OS 10.4 before. It said there was a problem with the BaseSystem, so I asked it to quit and reboot from the old OS, but now it's stuck in the Terminal application. I've removed the Leopard disk and inserted the original install disks that came with the machine, but it's not doing anything. All I can get is the list of 950 commands that I could type in.
View 4 Replies View RelatedI'm buying a new MacBookPro but can't decide, due to lack of knowledge, wich one to choose and if there's a noticeble difference between, 15.4" MacBook Pro Notebook Computer 2.2GHz Intel Core i7 Quad-Core4GB of DDR3 RAM500GB 5400rpm Hard DriveAMD Radeon HD 6750M 512MB Graphics15.4" LED-Backlit Glossy Display1400 x 900 Native ResolutionSlot-Loading SuperDrive802.11a/b/g/n Wi-Fi, Bluetooth 2.1+EDRFaceTime HD Camera, Built-in MicrophoneMac OS X 10.7 Lion (64-bit)
and the 13.3" MacBook Pro Notebook Computer 2.8GHz Intel Core i7 Dual-Core8GB of DDR3 RAM (2x4GB)750GB 5400rpm Hard DriveIntel HD 3000 Graphics13.3" Glossy Widescreen Display1280 x 800 Native ResolutionSuperDrive, Secure Digital Card SlotFaceTime HD Camera, Omnidirectional Mic802.11n Wi-Fi, Bluetooth 2.1+EDRMac OS X 10.7 Lion
Besides the screen size, one would be considerable faster?
I use Photoshop and beeing a photographer I deal with large files.
Info:
MacBookPro 2.66GHz 4GB 1067MHz DDR3, Mac OS X (10.6.2)
Just in case Apple surprise us with a Sandybridge Quad core, and even if they don't I was wondering the following.
1 ) During sustained use in 3D gaming does a Quadcore with lower clock speeds beat a dual core with higher clock speeds.
2) Can the quoted turbo speeds be achieved in sustained use (ie 3D gaming where maximal load can be applied for a couple of hours).
[URL]
i7-2630QM
Base Frequency 2.0GHz
Max SC Turbo 2.9GHz
Max DC Turbo 2.8GHz
Max QC Turbo 2.6GHz
i7-2620M
Base Frequency 2.7GHz
Max SC Turbo 3.4GHz
Max DC Turbo 3.2GHz
Max QC Turbo N/A
If i purchase an MacPro system with single quad-core processor, can a second quad-core be added after the fact? If not, why?
View 11 Replies View RelatedJust curious as to how much of an improvement in performance I would see upgrading my system as it states above, since my 2006 machine is 3 years old and getting close to the end of my apple care, figured I would trade it in and upgrade.
View 8 Replies View RelatedI do alot of photography with a canon dslr, I also plan to edit short HD videos as well as some photoshop and flash animation work.
Will I benefit greatly from the Quad Core Imac over the Dual Core Imac?
I have an opportunity to get a single 3.0 GHz quad core Clovertown.
Should I go for it? There's no advantage to having two cores in two sockets versus having four cores in one socket, right?
is it even possible to upgrade an old dual core powermac g5 to a quad core or even an 8 core.
I have a dual core one and i really need to upgrade to a quad or even 8 but it is so expensive to buy a whole brand new one and i was wondering if there was a way to just get a new processor and more ram or what not.
[URL]
What you say guys?
I know the same article is on main page
So the older Mac Pro's from 2008 have 2 2.8ghz Quad Core Intel Xeon processors, without hyperthreading, for a total of 8 cores, and the top of the line iMac has a Quar Core i7 2,8ghz with hyperthreading for a total of 8 (virtual) cores.
With the ghz being the same but less "real" cores, but probably newer CPU architecture, which CPU will actually be faster?
I know other threads exist, but they don't have responses specific to me so what's the harm in one more?
So, I am going to be selling my late 2008 15" MacBook Pro this week to get a new 27" iMac and I just need some legitimate advice from those "in the know" on processors.
I plan on having this iMac for about 3 years to do the following tasks:
1.) Record and edit HD cable (1080i) from an Elgato EyeTV HD - will include some encoding of 2+ hour sports game recordings
2.) Some light editing of 720p iPhone 4 clips in iMovie
3.) Surf the web, iTunes, iPhoto, Mail, and all the other standard stuff
Assuming budget is an issue, would you recommend me spending the extra money for a Quad Core i5 iMac or would I be ok based on the info above just going with the base Dual Core i3 model?
Like, will there be a considerable difference in the two machines (factoring in processor and graphics card) that will really be worth the extra $300 - $400 for 3 years of use?
I'm one of the many many people who are juggling mac pro options in my head.
is the 3.33GHz Westmere worth the extra 640? Probably not, but now much faster will be it? 20%....30%?
I think I'm set on either of these two options, mainly using FCP and photoshop and a bit of motion. maybe a bit of gaming
Also I can max out them four RAM slots and get a 5870 with the extra cash.
As I see the new Speedmark 6.5 test scores come out, I''m taken back somewhat.
I'm buying an iMac for my office which is used for internet, email, heavy excel and word. I like to get 4 to 5 years out of my computer so I'm switching to an iMac. That being said I'm buying a refurbished unit, but am wondering if it's worth the extra 4-500 bucks to upgrade from the 3.06 Core i3 to the 2.66 Quad-core i5??
If you have the guts and a few thousand dollars, why wait for Apple to release it?
[URL]
I have a Macbook Pro Core Duo that I use Compressor and it literally takes forever to compress FCP files. I know an upgrade to a Mac Pro would make the compression go faster and I know the 8 Core would make it go extremely fast, but can I do just as good with a Quad Core 2.66ghz. Would that cut my compression time down? An 8 core is a little out of my price range, but i'm pulling toward a Quad Core.
View 1 Replies View RelatedSo I was talking to my friend about the new MPs and that they should have two 6 core processors in it.
I plan on getting one for rendering scenes with Maya and doing stuff on AE, FCP, and the CS5 master collection. We were talking about his computer, which is one quad core processor.
He was saying that render times on Maya wouldn't be very different when comparing a quad core versus two hexa cores. I don't agree with him but would like someone elses opinion on this.
My one week old iMac 2.7GHz Quad-Core Intel Core i5. first started problems by not goping to sleep even when I forced it.
I shut it down using the shut off button and unplugging it from power for more than 5 munites.
I turned it back on, it does the usual startup chime and then gray screen. I have restarted twice from the shot off button and still getting the same result.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
I am a bit puzzled about my new MacBook Pro. I got the i5 but I have read online that these are actually dual core processors. What is the difference between the Core 2 Duo and the new i5s then?
Also I have a 27" iMac with i7 Processor, those are quad-core, any difference in processing power besides the clock speed?
I'm just going to order a new Mac Pro and noticed that it was slightly cheaper to order the base dual processor model and buy the 2.93GHz hex cores myself. A couple of questions arise:
Will my AppleCare still be valid or will I have to keep the 2.4GHz Xeons if I need to return it to Apple for any reason?
Is there market for the 2.4GHz processors?
Can I upgrade to the 3.33GHz processors or will this not work?
Is the new chip categorized as an i7 quad core processor?
Is there any danger to my 3 yo MBP core 2 duo(5,1) in upgrading from Leopard(10.6.8) to Lion?
I am trying to use my MBP 8,2 with two of my four cores shut down in order to preserve battery life. Is this at all possible through 3rd party apps?
Info:
MacBook Pro, Mac OS X (10.7.4)
I scanned the posts and didn't see this question, but honestly I didn't read all 20K + messages.I bought in late 2005 a dual 2.3 G5, about 6 months before the Mac/Windows combination came out. Does anyone know if I can upgrade or is it too costly to do so compared to buying a new machine.
Information:
PowerPC G5 Dual 2.3
Mac OS X (10.4.11)
I have the following system spec on my Macbook Pro which i bought in Apr 2006:
2.16 Ghz Intel Core Duo
2 G 667 Mhz SDRam
I would like to know if Snow Leopard will run on my system. I have been getting a few glitches for the last while when running internet related searches for certain sites like Youtube, and sometimes with streaming video. I figured that maybe i need a more up to date OS as i've been a bit slack with updating it.
Info:
macbook Pro, Mac OS X (10.4.11), None
I found this [URL] and I'm considering to give it a try after buying additional flash drive. Do anyone already did it and does it work?
Info:
MacBook Air, Mac OS X (10.6.8)
Well I am a little frustrated and looking for someone that can maybe find a solution with my problem. My mac pro system crashes constantly at least once a day if not more and it always seems to happen when I am doing something important. I have noticed that it usually crashes when I am on Safari... I have attached the report.
Sat Dec 27 17:35:08 2008
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x00af7127, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00fa9000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000036, ECX: 0x04086ed4, EDX: 0x000182b8
CR2: 0x00000000, EBP: 0x00108b18, ESI: 0x048c3660, EDI: 0x00108ff0
EFL: 0x00010006, EIP: 0x00af7127, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000000..............................
I've been hearing about this for a while now and Ive read that MBPs should have quad core by February.
I've also read that this isn't going to happen for a little longer. What's everyone's thoughts on this?
I own a PC and would like to switch over (finally) but am concerned about the $400+ premium. My thought is wait until the new quad-core MBPs come out and just get a standard duo-core (hopefully MAC will drop the price a few hundred).
However, I don't want to wait much longer than 2 months. Thoughts? Suggestions?
I just ordered a Mac Pro with Two 2.8GHz Quad-Core Intel Xeon, 2G of memory, 2 500G hard drives and I am wondering it is possible to upgrade it to 3.2GHz more cost effectively then buying it from apple directly during the purchase of a computer or even post purchase?
Also my unit came with 2 500G HD's, this comp is the lifeline for my webstore, web design and storage for all my personal stuff. So i am wondering if I should just buy 2 more 500G drives for roughly 80-90 a drive(memoryamerica.com) and a Raid Card to back up the first 2 500G drives or just buy a Western Digital 1 or 2 TB external OR buy a 1TB Time capsule.
The sole reason for the external or extra internal drives is in case the first 2 500G drives fail I don't lose any data.
Lastly, I bought the basic ATI Radeon HD 2600 XT 256MB card to run two monitors(one for the webstore, one for web design, photoshop and Adium or anything else I would use on the daily). I plan on putting in as BR drive(i know Leopard does not support it) but I was looking to use it for burning BR movies, and if need be run MV(microsoft Vista) to view/copy and burn BR movies(the two screens I am getting are HDCP), i am afraid this card does not support 1080P BR data, does any one know which one will?
I have talked to a Mac Genius and got no real info do to me wanting to use non Apple components IE non apple supplied HD's, memory(buying a 8G memory kit from Memoryamerica.com to reach 10G of memory) and BR drive and Dell Monitors(more cost effective and supports HDCP/BR)....
