Hardware :: Laserjet Iiip Mac Mini 10.4.3 Usb Belkin Cable
Nov 13, 2005
I have an old Laserjet IIIp I'm trying to use with a new Mac mini. Before realizing that tiger had gimp-print bundled with it I installed it separately, so maybe that's the problem. Anyway, I use the printer setup utility, and click add, and it shows me a USB printer (without a name, that's odd.) I choose HP and then "Laserjet III Series," and whether I choose the 4.x driver or the 5.x driver, clicking add does nothing. No dialog, no spinning of the disk or the printer, just nothing.I know the driver supports this printer, and I know the cable in question (a Belkin USB->Parallel cable) works with gimp-print and even with this printer. Rebooting the Mac doesn't help, even if the printer is on and connected during the reboot.
View 5 Replies
ADVERTISEMENT
Mar 21, 2012
I have loaded the HP driver, I see the printer in "PRINTERS" but it does not print. I am using 10.5 and the printer is using the parallel cable to usb port.
View 3 Replies
View Related
Dec 7, 2008
I got off a friend a Belkin Wireless DSL/Cable 802.11g Router and I use Mac only and tried to connect at all up followed the instructions but when I was asked to put in the url 192.168.2.1 nothing came up and I am stuck there.
View 1 Replies
View Related
Jul 4, 2012
I have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera or firewire cable. Trying to get footage into Final Cut Pro 10 off mini dv tape.
Info:
iMac, Mac OS X (10.7.3), Final Cut Pro 10
View 3 Replies
View Related
Mar 14, 2010
I have trying to get my laptop hooked up to my tv, using the apple mini displayport to DVI -> belkin DVI to HDMI cable setup (as recommended by the dude int eh apple store - which i knew and planned on doing anyway :P).
anyway, when i first plugged it in to the tv in my hotel room it worked, 1080p, then stopped .. then randomly worked again after a few ties. Once I got home i hooked it up to my sharp aquos 42 and worked fine, then after it was unplugged and tried to get it working again, it basically just.. wouldn't - i don't get a picture/signal on the tv, no options in the display cp , nor does the screen go blue when it normally finds a monitor/tv. i've tried plugging it in both ends, restarting, turning tv off/on, everything to no avail. I know the dvi-hdmi cable works, used it from a windows desktop to make sure. the mini displayport to DVI works for DVI 100% of the time into one of my monitors.
as mentioned it had worked at first on and off..., and now i cant get it working on my 1080p tv, nor the 720p one that's in my room, neither of them get a picture/signal; no options in display control panel either, or the quick display flash to blue. Furthermore, sometimes when unplugging the dvi cable from the tv i get the laptop screen flash, as when it picks the device up initially.
I never got my emailed invoice from apple when I bought the cables in in SF during macworld so I cant just return it to apple I'm sure.
any ideas would be greatly appreciated, please help this is making me go crazy... worked and now nothing no matter what i try. Oh, also tried on another, new user to see if it was a weird setting that got saved.
View 4 Replies
View Related
Jun 23, 2012
Belkin 4 usb hub does not show up on list of peripheral devices. Will run printer & keyboard but not icube or logtech mic. Why does the hub not show as external device like nano, etc?
Info:
Mac mini
View 3 Replies
View Related
Jan 27, 2007
I have problems using my new HP LaserJet 1018 printer together with a mac mini. After looking on the net I found the printer program: foo2zjs, but since I am new in the Darwin/Unix world I had problem with the installation.
View 7 Replies
View Related
Apr 15, 2009
I have just read a ton of forum posts and want to make sure I am going to buy the right accessories to make my new Mac Mini all it needs to be to run my home theater.1. For 5.1 audio, do I need to buy this product and then just use a standard Optical audio cable to plug into my receiver?2. The new Mac Mini comes with a mini DVI to DVI connector correct? So all I will have to buy is a DVI to HDMI cable?3. Is OWC (other world computing) the best place to buy upgrades for the mac mini? I have looked at the videos on youtube and it seems like something I should be able to do no problem.
View 10 Replies
View Related
Jun 6, 2010
With a sharp fingernail I seem to have damages the internal ribbon cable that connects the audio card in my 2009 Mac Mini, and am looking to source a replacement, preferably in the EU. I'm currently in the UK.The part number is 922-8809.
A Google search reveals a few parts suppliers in Europeland, but they are all charging silly prices for the cable, and US suppliers impose ridiculously high postage charges.
View 3 Replies
View Related
Mar 6, 2009
I need a 6ft DVI to HDMI cable to connect my mini to my TV. Unfortunately these are out of stock at monoprice. Can you suggest any other reputable alternate site where these cables can be bought for a reasonable price?
View 1 Replies
View Related
Sep 24, 2009
Im confused on cable to buy?
View 4 Replies
View Related
Dec 8, 2009
I'm looking to hook my cable into a tv tuner that I will hook up to a Mac Mini. The Mini will then be hooked up to my flat screen.
I have Tivo now that allows me to remotely schedule recordings and it is a dual tuner allowing me to record to channels at the same time.
1. Can computer tv tuners record 2 channels at the same time?
2. Can I remotely "log in" to the Mini/tuner and schedule recordings?
3. Can I remotely log in and watch my recordings from another location?
4. Can I remotely access my tuner from another location and watch TV (like a Slingbox)?
View 1 Replies
View Related
Dec 23, 2009
send me pics of the power cable of the new mac mini because i want to use it in Europe.
View 19 Replies
View Related
Apr 8, 2010
I have a late 2009 13.3" MacBook, and I want to use my tv as a monitor but I wasn't looking to have 3 adapters to make it possible so I was hoping to have the Mini DVI to HDMI cable. Well newegg said this cable was what I wanted so I bought it for $20 and of course it isn't what i want at all. Where can I find the cable I want?
View 7 Replies
View Related
Jul 20, 2010
How long is the HDMI to DVI cable on the new Mini? Just want to know.
View 3 Replies
View Related
Mar 3, 2009
Could somebody point me to the type of cable I would need to connect a Mac Mini to a standard DVI port? The Mini comes with the necessary adapter, correct?
View 7 Replies
View Related
Mar 16, 2009
I have two mac mini's set up side by side, and I want to connect them together with firewire so I can quickly send files from the new one to the old one, acting as a storage hd. What type of firewire cable do I need? one mini the old one has max output of 400, and the new one is 800.
View 2 Replies
View Related
Oct 8, 2009
How long is the cable on the new 24" with the mini connector? Is there an extension cable available?
The Mac Pro will be on the side of my desk, maybe 6 ft to where the monitor will be?
View 2 Replies
View Related
Jan 2, 2010
I got the mini-displayport+USB(sound) to HDMI adapter. I just need a HDMI cable to plug into the adapter now. What is a cheap good HDMI cable? What kind should I get? 1.3 or 1.4? Does it matter?
View 13 Replies
View Related
Jan 15, 2010
im thinking of purchasing a mini-displayport to dvi adapter can anyone confirm it works with a dvi to hdmi cable to there tv?
View 4 Replies
View Related
Mar 1, 2012
I am trying to connect my Mac Book Pro to my HD tv using a HDMI to 3mm Mini cable but it will not work ?
Info:
Mac Pro, Mac OS X (10.6.8)
View 2 Replies
View Related
May 12, 2012
does someone know the Product number of the SATA Cable for the mac Mini (mid 2011) for 2nd HDD bay?
Info:
Mac mini, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 2, 2012
I'm trying to plug my new mac mini into my Dell flat screen monitor. It doesn't seem to fit my HDMI to VGA cable so I'm assuming that my cable is in fact a DVI? The cable is actually a little too big for the VGA adapter and no spots for the screws.Â
View 8 Replies
View Related
Jun 17, 2012
I have a Monoprice USB/Mini-USB to HDMI port in Samsung LCD TV. When watching a movie being shown from my Macbook to the TV screen we can't get audio to transfer to the TV. We've tried different setting on the TV remote but nothing seems to work.
Info:
iPhone 3GS, iOS 5, Main syncing computer is MacBook
View 1 Replies
View Related
Jun 26, 2012
I have a week old new Mac Mini (2.3 Ghz Intel Core 5; 4 GB of RAM) and noticed its power cable is loose. I don't seem to be alone online like in [URL]... Is there a fix for this like a better power cable?Â
View 4 Replies
View Related
Jun 4, 2010
I have hooked up a 2009 Mac Mini (2.16, 4 gb RAM, SL 10.6.3) to my sony receiver.When using an analogue cable, it works, but in stereo of course. I plugged in a tosslink optical cable, and nothing happened, so I thought maybe the cable is broken, so I bought a new one. So when I plugged it in, it worked....for about 2 hours. Since then, I had no luck whatsoever, no sound, nothing, nada.I tried using the cable with my macbook, worked like a charm. Several reboots and a pram reset later, same thing, no sound. I checked the settings, but there's nothing really to change there, it's set to digital out and that's it.I even tried a ridiculously long terminal command to reset core audio, to no avail.
View 1 Replies
View Related
Jul 26, 2005
I also took the time to search on this topic and couldnt find anything related
heres the sitch!
Computer = Mac Mini 1.42 model
TV = Samsung TXR3079WH HDTV
DVI to HDMI cable connected to a Samsung HDTV TXR3079WH
the tv doesnt come with dvi connectors so i opted out and purchased the dvi-hdmi cable. i hook it up to the samsung tv and then boot it up and nothing appears on the screen. it just freezes the television to the point that i cant even change to a different source input.
I tested it with different resolutions (i had an LCD next to me to interchange with) and neither resolutions worked. I then thought it might be the DVI-HDMI cable so i hooked it up to my Comcast HD Box and it worked perfectly fine. I then took the Mac Mini to a neighbors house and hooked it up to his 47" Panasonic HDTV and the Mac Mini fired right up and worked beautifully on the Panasonic HDTV using the same cable. Went into System Preferences and under diplays it actually said "Panasonic HDTV" so it recognized the tv. and the resolution automatically reset itself to 1900x1200. Then afer seeing that the Mac Mini was capable of this and all the settings must have been right, i walked back over to my house and the initial problem started again. No Picture on the Samsung HDTV. After all this i found out that the DVI port on the Mac Mini works, The DVI-HDMI cable and the HDMI port on the back of my Samsung TV works as well. So i think it might just be a samsung driver issue? dont know how to resolve this issue.
View 4 Replies
View Related
Mar 1, 2012
Question: Can I transfer files from my MBP to my Mini using the Thunderbolt cable. It may sound too simple but for me I have never tried this before with either a Mac or PC.
View 1 Replies
View Related
Mar 22, 2012
watch Tv on my New Imac 21.5 (2012) with thunderbolt port.My set top box has HDMi out. I need to connect HDMI ( from Cable Box) to thunderbolt ( On Imac)I have learned that this can be done by single coverter cable = HDMI to Mini display cable (Thunderbolt port will accept Mini diplay Input, they say)Â will it work > how about the audio?Â
Info:
iMac, Mac OS X (10.6.7)
View 1 Replies
View Related
May 1, 2012
I don't have a CD drive for my mac mini and am wondering if I can access my imac cd drive from my mac mini through a thunderbolt cable?
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
