I got off a friend a Belkin Wireless DSL/Cable 802.11g Router and I use Mac only and tried to connect at all up followed the instructions but when I was asked to put in the url 192.168.2.1 nothing came up and I am stuck there.
View 1 RepliesWhat is the best router to have for my iMac 27", 3.06 gig? I currently have a Belkin N1 Wireless Router, but it has been acting up lately, dropping my connection, requiring disconnect/re-connect.
View 24 Replies View RelatedI'm going to buy a Macbook Pro (13") in two/three weeks. Now I've been lurking these forums for some time now and I read there were some problems with the Belkin Routers. I own a Belkin G Wireless Router F5D7234-4 (this one: 1012107496.jpg), will that router work on my soon-to-be-Macbook Pro?
View 2 Replies View Relatedjust got a belking wireless router. g i think.
what are the best settings that i should have it on.
only 2 macs will be on it.
want it with a password bc its a populated area.
Since Saturday I've been having trouble connecting to the internet. For the last 18 months we've been connected to my Airport Extreme Base Station (2003) which in turn is wired to a Motorola SB5101 cable modem. Every time I had called the ISP (Comcast), they've been able to get it going while I was on the line by restarting the modem (which I tried before calling). Last night nothing would work no matter how many times I rebooted the modem and after many trial and errors, we were able to get connected to the internet by hooking my MBP directly to the ethernet cable from the modem and taking the Airport out of the equation. The service rep decided my router was likely at fault and I wasn't inclined to argue as it is an old router and things do break over time.
However, I ran out and bought a brand new Belkin Share wireless router and now neither that nor the Airport can connect to the internet even when the lights on the modem say all is well. Unfortunately, the Belkin came with it's own software package for router management and setup, which I'm not too keen on. It kept saying it couldn't connect to the modem or that the internet connection to the modem was lost. In tonight's efforts, I'm always able to plug my MBP right into the modem and get a connection, but as soon as I move that cable to the Airport or the new Belkin, my internet is gone. The Airport connection in the Network section of System Preferences always comes up as connected, but the Belkin glows dark red instead of green and the accompanying software says no connection to the internet can be found.
Does this sound more like the fault of the modem, the ISP, or me, the user? Any help would be much appreciated. Although I am able to connect now, my roommate's computer doesn't even have an ethernet port.
So I'm trying to connect my MBP to my new Belkin Double N+ (F6D6230uk4) router. I have 2.4 ghz set to b/g and 5 ghz set to n and 20/40hz bandwidth. Last night, when I connected to the router for the first time, I was showing 300mbps, when you Options+click the Airport icon. However, now I'm only showing 145mbps. To be fair, I may have changed a few settings between now and then, but I have no idea how I was able to get 300mbps before. It's as though it's only connecting to one channel, instead of two, which is required for 300mpbs I think?
View 2 Replies View RelatedI have AT&T Uverse. They give me a Wirless router that runs all of the phones, T.Vs, and internet in the house. I have an Airport Express that I want to connect through an ethernet port to the AT&T router. Its a 2Wire 3800. I've read up a lot on how you need to set up the DHCP and Static IPs and stuff, but I just cant get it to work.
View 8 Replies View RelatedA friend of mine has a Mac Mini (PowerMac 10.1)He wants it to connect to a wireless router.ll the Wireless Dongles I can find have to have the 10.3 or later,is there a dongle that will work on 10.1 or will I have to upgrade his Mac to10.3 or later?f I have to upgrade it, will it effect the performance of the Mac much?
View 1 Replies View RelatedI have a Macbook Air Rev.C 1.86GHz and just yesterday, it stopped connecting to my D-Link wireless router. There have not been any updates applied to the router or the Mac recently, nor have I installed any apps to the Mac either. My iPhone sees and connects to the router fine, as does my MSI netbook, and my TabletPC too. I have turned the router off numerous times in trying to troubleshoot this, and only for a minute or two, does the Mac see the router and connect getting an IP. It then loses the connection shortly after. I have turned off the Mac's Airport a number of times, I have reset the SMB (I think, using the ctrl/shift/option/Power button while off, letting go, then pressing the Power Button only).
View 3 Replies View RelatedI am trying to get a MacBook to connect to my D-Link wireless router. I can see the network on the Mac and the first time i connected typed the password in and it worked fine. 20min later the connection has been dropped and it won't reconnect.
View 2 Replies View RelatedI've always had problems connecting to the Internet but last night my iMac refused to connect to the Internet. Everyone else in my house can connect to the Router but for some reason I can't - I try going through the network diagnostics for Airport and the first 2 steps turn green, but the rest remain red. It keeps changing from 'No IP Address' to something about a self-adressed IP address. I went into my network utilities and it appears that I don't have an IP address (according to that)? Right now it's just impossible to connect to the Internet.
Info:iMac
I have a 2.4 Gh Aluminum iMac running OSX 10.5.6. I connect to the internet via Windstream and a Speedstream 4200 DSL modem. I am trying to connect a Netgear WNR2000 Wireless-N Router to the system but even after I go through all of the power up sequence as described in the user manual, I can not connect to the internet with the router connected to the iMac and modem. I can not access the router through the iMac either. All of the lights on the router that are suppose to be on are indeed on, although the ethernet light on the router is orange instead of blue like the rest of the lights. I called Netgear technical support and that was the most painful and fruitless tech support call of my life (I'm not sure if the tech support person had ever seen a Mac let alone know how to troubleshoot one). how to get this router to work with my iMac and DSL modem?
View 3 Replies View RelatedI have use my mac computers many time as the wireless router by sharing through the airport express and it has worked great but I have only done it to share the internet with other macs. I just got my parents a macmini and i told them that it worked as a wireless router also but they are having problems connecting their PC laptop. How do I trouble shoot this. We are using a WEP. The PC sees the wireless name but cannot connect to it.
View 2 Replies View RelatedI have a coax broadband internet connection and was wondering how you connect a wireless router to the coax?
View 2 Replies View RelatedI've updated my wireless rounter and also decided to not have it broadcast the network.I can connect to the router no problem by using the option "connect to other network".I also have the box checked that says, remember this network, but my macbook doesn't automatically reconnect after it sleeps or when I turn it off. Would love to understand how to make my macbook automatially reconnect so I don't have to go through the extra steps of reloggin on each time.
Info:MacBook, Mac OS X (10.5.8)
I can connect to my router via wireless connection, but I cannot open any webpage.
Anyone has an idea what the problem might be?
Info:
iMac, Mac OS X (10.4)
Today when I turned on my computer, it suddenly would not recognize any kind of Internet connection. The Ethernet cable that I use every day now shows up as 'unplugged' even though it is plugged in. I have tried using a different cable, and it still shows up as unplugged. When I try to connect to the Internet wirelessly, there is always a connection timeout and I can't connect. I use a self-assigned IP address and I've never had this problem before. I've also reset my PRAM, but it hasn't worked.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I have done everything contained in this link to make my Mac a wireless router. We are connected to the internet via ethernet.http://maketecheasier.com/create-wif...s-x/2009/10/20I just purchased a piece of crap Android tablet that I absolutely hate, but cannot return. I was able to wirelessly connect to a local linsky connection, but it has since disappeared. I am now making every attempt to enable the Airport on our Mac so that I can actually use this garbage Android tablet. The tablet I am using is a Next2 (garbage, don't waste your money).
View 2 Replies View RelatedI am the proud owner of a brand new MBP. Im still learning everything as i go but i simply CANNOT figure out my backup situation.
I purchased a Netgear rangemax dual range wireless router (WNDR3700) and a WD MyBook 1 TB external hard drive. i have been trying to hook this up to Time machine wirelessly but i just cant get it to work.
i have already tried hooking up the drive directly to my MBP and it works fine, but i want to do it through wireless router. has anyone experienced anything like this or has a way to help? i have searched the far corners of the net and found nothing
I have a Linksys WRT54G wireless router (v. 6), a brand new iMac (Intel, OS 10.5.4), and an older iBook (G3, OS 10.3.9). I can configure the router using the iBook with no problems. Afterwards, the iBook shows an IP Address, Subnet Mask, and Router under the iBook's Network Preferences. The iMac detects the wifi network I set up using the iBook (for example, "mywifi") but cannot obtain an IP address or other configurations. Sometimes the iMac says Airport has a self-assigned IP address but can't get on the Internet, sometimes it says it has no IP address. I have removed all WPA securities/encryptions to simplify the process, but the iMac still can't see the router. I tried to ping the router from the iMac and no packages were received, 100% loss.
View 1 Replies View RelatedThe wireless network I want to join runs through a Wnet R300 router with a 3.5G simcard wireless internet connection. My MacBook will not connect, while all other devices (Kindle, Nokia phone, Mac Mini, etc.) will. I have changed the wireless security on the router from WEP to WPA2 and still no luck. What settings do I need to change?Â
Info:
MacBook, Mac OS X (10.4.11)
My setting on my Imac are messed up and wont allow me to connect to my wireles router. What do i do to get the settings correct?
Info:
iMac
forwarding ports to my semi-new iMac. I got my iMac back in September and I've been trying to forward my ports since then but have unsuccessfully done so. I've followed every guide i can find but still i dont know what i've done wrong. I have a Belkin N+ router. I think that I managed to give myself a static IP but from there i can't get anything to forward.
View 13 Replies View RelatedAfter extensive Googling, I need to take a break, and find out if someone with more experience knows what I can try next...
I'm not the best when it comes to Networks, or even router configuration. I'll just put that out there, in case I've missed something obvious.
My router connection (DLink 2640B) was working perfectly fine before I upgraded to Snow Leopard. Now I cannot connect to any wireless network, and I cannot connect to the router administration page, either
(192.168.1.1).
The internet connection still works fine on two other laptops. Also, I can connect this iMac via the ethernet cable.
I've tried deleting the files NetworkInterfaces.plist, com.apple.network.identification.plist, and preferences.plist; I've tried rebooting my router; I've tried creating a new network. Airport sees all the networks, tries to connect, then it just says that it fails.
I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??
Info:
iMac
I have a Linksys Wireless Router and a Linksys Modem, the router is 6 years old or so 802.11b, how much faster would the Internet be if I had a combined Linksys wireless router/modem versus the 802.11b that I have now?
Would I see a huge difference? I am running my Macbook off it and an olde Toshiba laptop.
I just bought a Belkin N router (a F5D8236), and I've finally been able to get it to work, but every time I try and set a password on the router itself, it seems to save the wrong one! I've tried several times now (v-e-r-y carefully, checking the capslock key), and the same thing happens. Once I've entered the password and the router resets, I can't login again without reverting to factory settings.
View 1 Replies View RelatedI have an old Laserjet IIIp I'm trying to use with a new Mac mini. Before realizing that tiger had gimp-print bundled with it I installed it separately, so maybe that's the problem. Anyway, I use the printer setup utility, and click add, and it shows me a USB printer (without a name, that's odd.) I choose HP and then "Laserjet III Series," and whether I choose the 4.x driver or the 5.x driver, clicking add does nothing. No dialog, no spinning of the disk or the printer, just nothing.I know the driver supports this printer, and I know the cable in question (a Belkin USB->Parallel cable) works with gimp-print and even with this printer. Rebooting the Mac doesn't help, even if the printer is on and connected during the reboot.
View 5 Replies View RelatedI have my Canon GL2 connected to my I-Mac OSX version10.7.3 with a Belkin 800/400 9-pin to 4-pin firewire cable and the computer is not acknowledging the camera or firewire cable. Trying to get footage into Final Cut Pro 10 off mini dv tape.
Info:
iMac, Mac OS X (10.7.3), Final Cut Pro 10
Updated to latest security download and now MacBookPro cannot connect to wireless router.iPad works on the router and MacbookPro works on other wifi networks, but it will nolonger work with the actual wireless router that I used to download the latest security software? Is there some security issue I need to address? There is no security/password on this wireless router.
Info:
Mac mini, Mac OS X (10.6.8)
