I have a 1998 VHS tape of a family event I want to import into either iDVD or iMovie. I have a VHS player with both audio & tape banana plugs and the "S" connector. I have a digital Sony movie camera (about 8 years old) and it doesn't have AV & Vid inputs or an S input, only outputs. Is there any way to do this with this equipment? I would like to put the tape on a thumb drive or burn it onto a double layer DVD.
View 1 Replies
I have an old 4-track tape recorder with 4 outputs, which I would like to connect to a Mac and import all 4 tracks at once to GarageBand for editing. I've seen USB adapters that have two RCA inputs, and am thinking that if I purchased and connected 2 of these adapters, I would be able to run them simultaneously.
View 5 Replies View RelatedI have a MacBook Pro 15" - Model A1226 (Santa Rosa, circa 2007). I need to replace my right fan. AppleCare just expired (of course). But replacing the fan should be pretty easy, I think.
The only question is about the tape securing the fan to the heatsink. On the old fan it looks like electrical tape, but on the "sticky" side, it looks like there is a bit of copper (?) in the middle.
So my assumption is that regular old electrical tape is not appropriate, but some special kind of electrical tape. What type of tape is that?
Well, I just got a replacement door because the door wasn't sealed properly after use. The hooks are more curved and the front of the device looks proper. However, there is still one corner sticking up which also makes a metallic noise when I set it down. So I tried putting some wall stickers on there, but they were too think so I found some double stick tape and stuck it on the rim surrounding the battery and then the battery itself. I might request another door from Apple, but for the moment is this a OK thing to do? I had thought about the detrimental effects of this thin plastic on the battery, but the tongue (to take out the battery) looks as if it's plastic as well.
Is putting tape on my battery to fix the door issues a bad idea?
What is the width of the Kapton tape used in the 2007 Santa Rosa MBP?
View 2 Replies View RelatedI need to purchase some of the orange anti-static tape that Apple uses to cover the connections on logic boards. I recently fixed a MBP (2.4GHz SR 15") and need to find some tape for the board. I know it isn't a completely crucial component, however, I would like to make my computer look as if it were new. If anyone knows where to buy this tape, the exact tape, not another version, please post a reply or email me. Thank you.
View 6 Replies View RelatedWant to take old cassette recordings and record them into my laptop.
Have all the software - garageband, audacity, audio hijack.
Need to know about the connection, etc...
Info:
MacBook Pro, OS X Mavericks (10.9.3)
Have just finished movie on MacAir with material from camcorder's hard drive. No problem in transferring material from the brand new camera. I have older digital material recorded on tape cassettes by Sony videocam which I would like to re-work with iMovie11. The iMovi11 manual says transfer to the Air requires a FireWire connection. I still have the older digital camera and the cables that came with it but neither the Air nor my Toshiba laptop have FireWire ports. Any thoughts on how to effect a transfer?
Info:
iPad 2, iOS 4.3.3
How would I import a micro cassette audio tape onto a MacBook Pro?
View 1 Replies View RelatedLooking for a suggestion to which software package to use to convert my old vhs tape to digital format?
Info:
MacBook, Mac OS X (10.7.3)
how to record vhs tape to mac
Info:Mac Pro
Below is a message from BRU Technology about Mac OS 10.4.10 is not compatible with tape devices connected to Mac OS X 10.4.10 via SCSI, FireWire, USB, SAS, or Fibre-Channel.
Is anyone having issues with thier setups ?
I suffer from extensive paranoia of data loss and in addition to the HDD-based backups I do now, I've been looking to back up the Pro using tape. There are Mac incompatibilities in connecting to my SAN infrastructure, but as an alternative I have a Sony AITe200-UL Firewire AIT drive which I use on some of my Windows desktops which don't connect to my main network.
The backups would in all likelihood be attended (i.e. I'd be sitting near the machine for the duration of the backup) and will most likely not exceed the uncompressed capacity of the tape drive (80Gb) as it'll be documents only, not media (which is centralised and already backed up properly). A decent verify is a must but apart from that, I don't need a backup software jangling with features. I would like quick, fussless install of the backup software so that it's a good second-string backup to a bootable HDD image in case that doesn't work for any reason.
My automatic choice would have been Retrospect Desktop because I've worked with it - I use Retrospect on some of my PC's already. But is there a better option on the Mac?
I have an iBook G3 with a busted logic board. I sent it away for someone to weld something, and that fixed it for a few months. I do not want to pay $75 dollars to get it welded again, because I feel like at this point I could try it myself.Does anyone know of any tutorials, or like some step by step instructions, on how to open this baby up, and where to weld? Thanks.Edit: I heard there is an easier way to do this, wedging something into the LB and attaching it with tape or something. This would be preferable.
View 2 Replies View RelatedI have a few old recordings of class lectures on cassette tape that I really need to clean up.
View 3 Replies View RelatedWhat wires or hook ups do I need to import this VHS tape off a newish Sony VHS/DVD player into my 2009 Mac Mini?
View 3 Replies View RelatedI have about 600 gig to backup. Could anyone suggest backup software, a tape drive, with links if possible, to purchase?
View 2 Replies View RelatedCan anyone recommend a brand/type of super-adhesive metal-to-metal double-stick tape?
I have a very slight warp to the bottom pan of my MBP. So slight as to be unnoticeable save for one rather obvious result: the part that goes over the top of the optical drive slot has come un-glued/fastened/riveted to the frame behind.
I want to secure it back against the frame and tape seems the best option. The pressure on the flange (part over the slot) is not great - it can easily be pressed in and will hold for a second or two - but will not hold with just regular double stick.
Having updated to 10.5.7, Calculator no longer displays Paper Tape on my G4. Funnily enough, Save Tape As... still appears in the File Menu.
Okay restarted and it is back, whew! Wish Show Paper Tape were a preference that could be saved, half the time Calculator launches without it, though I never uncheck it.
My video footage is scattered in 2-3 tapes and i want to arrange them all in one. I was thinking to capture them in my PowerBookG4 via iMovieHD (6.0.3) and then record back all the footage (captured video) in the sequence i want, to one tape...
Is this possible and how?
p.s. Note that i want to capture and write back to the tape the uncompressed dv format and not mpeg.
I'm trying to record/trans music from my cassettes to my mac All connections seem to be correct. But when try to play from the deck - which shows a signal - I don't hear anything when trying a record it thur peak or sound recorder.
View 1 Replies View RelatedI've been doing some searching and can't find any threads regarding capturing audio (cassette tape) to a mac. Wanted to rip some old school tunes from some tapes and convert to MP3. I connected an old tape deck to my G5 via ADS Pyro A/V Link (RCA audio input to Pyro, firewire connection out to G5), that doesn't seem to work. I've also tried connecting to my iMic USB, but that's not picking up any audio either. I've tried using QT audio recording, iMovie, FCP, and Analogue Ripper with no luck. They recognize the Pyro and iMic, but not picking up audio.
Information:
G5 Dual 1.8Ghz (Q37), 4.5GB ram, Pioneer 112D burner (internal)
Mac OS X (10.4.10)
320GB + 500GB SATA HDDs, Radeon 9600 Pro Mac 256MB, LaCie firewire burner (ext)
Apple should make a wireless keyboard/trackpad all in one so that we don't have to resort to using tape.
Anyway, I can move my keyboard around on my desk and the trackpad is perfectly lined up with the keyboard at all times.
Can I get analog camcorder tapes into iMovie?
View 3 Replies View RelatedI have: FCP X 10.1.3
Hi 8 tapes and camera
VHS and SVHS tapes and camera
JVC GY-DV5000U camera and mini DV tapes
Firewire cable
Apple Thunderbolt to FireWire Adapter
These tapes and cameras are unsupported in FCP X 10.1.3.
How can I capture (import) the video tape segments onto my Mac OS X version 10.9.4 so that I can edit the video in FCP? Are there special procedures or products that are needed?
Info:
iMac, OS X Mavericks (10.9.4)
When I'm trying to capture on my iMac using FCP7 through a Canon XL1 I get this message: "Capture encountered a problem reading the data on your source tape". Now I know it's not the tape as when I use my iBook to capture (fcp5) it's fine. I know I could use the iBook but I've been having problems with it in other forms so I can't rely on that working forwver and once/when it dies, I'll be stuck. I've tried all the usuals: rebooting, different cam to transfer, different cables, re-instaling FCP and I'm still scratching my head.
View 1 Replies View RelatedSo my sister's girlfriend is a professional photographer. Her former consultant get her an SCSI 68-pin connected Sony StorMaster tape drive that backs up her 3 big NAS drives with all her work via EMC Retrospect. This was on a PowerMac G5 tower with an SCSI 68-pin card installed. She's moving and has tasked me with getting it all up and running again at her new place since she's fallen out with the old consultant (who did some weird, weird stuff with their network - why are there 3 switches for the NAS? Why does the Airport run through two of them? WTF?) and got an iMac 27" i7.
Now, problem is, obviously that her i7 has no way of plugging into that SCSI tape drive. She's been using her G5 purely to run Retrospect which is a waste of space and energy. Plus she's moving to a much smaller space, so I really, really want to get it out of there. So here's the thing - I CANNOT find a 68-pin SCSI to USB adapter other than one by Ratoc, which apparently only lets the tape drive function in "mass storage mode" which doesn't really tell me if it will work with Retrospect or not. Is there another solution to keep the current tape drive and plug it into the iMac?
I've added artwork before to imported mp3 but now using an ION cable (Tape Dec to MP3) any artwork file will not copy across to itunes.
Info:
iMac, Mac OS X (10.7.3)
The audio and video are out of sync after importing to FCP 10.1 from my mini DV tape source. The audio and video are in sync coming out of the tape deck but they are out of sync by over a second in FCP. How to correct this?
View 2 Replies View RelatedHaving updated to 10.5.7, Calculator no longer displays Paper Tape on my G4. Funnily enough, Save Tape As... still appears in the File Menu. Okay restarted and it is back, whew! Wish Show Paper Tape were a preference that could be saved, half the time Calculator launches without it, though I never uncheck it.
View 5 Replies View Related
