MacBook Pro :: How To Know About Super-adhesive - Metal To Metal Double Stick Tape
Aug 13, 2009
Can anyone recommend a brand/type of super-adhesive metal-to-metal double-stick tape?
I have a very slight warp to the bottom pan of my MBP. So slight as to be unnoticeable save for one rather obvious result: the part that goes over the top of the optical drive slot has come un-glued/fastened/riveted to the frame behind.
I want to secure it back against the frame and tape seems the best option. The pressure on the flange (part over the slot) is not great - it can easily be pressed in and will hold for a second or two - but will not hold with just regular double stick.
View 11 Replies
ADVERTISEMENT
May 18, 2008
I have developed a nasty case of contact dermatitis on my hands, and I think it's triggered by a mild metal allergy to my MBP.
Anybody know where I might find some kind of a cover for the palm rests etc? I'm using an external mouse / keyboard at the moment.
It's hard trying to track down the cause of the allergy but most of my time is spent on the laptop so...
View 24 Replies
View Related
Aug 1, 2006
Has anyone experienced the disturbing dark blemishing/staining/erosion that showed up in several aluminum PowerBook models.like in the handrest area?
I am curious because I have a small little spot that said area and cannot get it clean.While it may be a little dink, I may invest in some kind of protector if word is that others are seeing any blemishes.
View 2 Replies
View Related
Feb 9, 2009
has anyone had tiny cracks in the metal of the unibodies? I have a macbook pro with an invisible shield on it and I have noticed what looks to be a tiny crack about a cm in length. When I rub back and forth on the invisible shield it goes away as is the chemical used to hold on the shield fills it in?
View 22 Replies
View Related
May 10, 2009
So I am planning to start riding my motorcycle to class, and I need to bring my macbook. While I do have several backpacks that can carry it, I am terrified of ruining it if I were to wreck the bike.
View 4 Replies
View Related
Nov 4, 2009
today I received my new MBP15, unpacked, opened the screen..and I found this: [URL:...] it's not in relief, seems some defect in the aluminum, like metal fatigue. Is it common? No way to fix it?
View 7 Replies
View Related
Aug 30, 2010
I read that this liquid metal is very light weight and still strong at the same time.
But wondered how it looks.. Is it glossy like stainless steel or brushed as the aluminium used on iPad and MacBook Pros? How dark is it?
There has been alot talking about a Carbon Fibre MBA, as it would take some of the weight - could this be it in stead?
View 6 Replies
View Related
Jun 10, 2009
Ok so i'm looking for somewhere to clip an antistatic wristband on my macbook while i just change the RAM
1) Is it really necessary to take this precaution?
2) Where can i find bare, unpainted metal to clip it to?
View 3 Replies
View Related
Sep 5, 2009
So many users on here complain about the Aqua interface and want Marble. Now I never got to use anything prior to Leopard, this perhaps could explain why, apart from a quick go on my teachers iMac which had Tiger. I for one love the Aqua interface as well as the old Pinstripes used in earlier versions of Mac OS X, I have a thing for stripes as well as pre-leopard OS X.
Now what I want is an update from users on GUI applications out there, all the older threads will be out of date now. So let me know what's going on with them. Does anyone know where the files for GUI are kept in Snow Leopard or Leopard, I'm wondering if you can almost do a transplant of the files from Tiger into Snow Leopard? If there is also anyone who can make a Pinstripe theme for the dock to be used in DockDoctor could you post the files? I've added a screenshot from 10.0 to just remind anyone of the style.
I've also added a poll to get some real data on how MacRumors feels about Aqua.
View 7 Replies
View Related
Jul 4, 2009
I would like to skin my software with a brushed aluminum look.
Is this an option with OSX?
Plugin etc....
View 1 Replies
View Related
Feb 7, 2012
The metal flap over the dvd drive won't close on my Mac Pro.Very annoying,dust will kill.
View 6 Replies
View Related
Oct 5, 2010
My fonts have been randomly changing and now all my windows have the brushed metal theme even though I am running the latest Snow Leopard release.
View 6 Replies
View Related
Nov 15, 2009
Is there any way that I can change the skin of Finder from the brushed metal to something similar of Firefox/Mail.app? I have tried using Uno and that gave the perfect result, but it also changed my other apps too. Changing the Uno settings to 'Default Aqua' for all except finder failed also, as it still changed Firefox.
So does anyone know how to get rid of the horrible metal texture of Finder and replace it with something a little more consistent, and without changing any other apps (except other metal textured ones)?
View 4 Replies
View Related
Dec 15, 2010
When I tilt my 27" cinema display, it sounds like metal rubbing on metal.
View 9 Replies
View Related
Dec 11, 2010
Ive been looking around, and found "MacBooks" that are metal unibodys, but have the spec of the MacBook "pro"s.
View 9 Replies
View Related
Jul 4, 2010
I have a MacBook Pro 15" - Model A1226 (Santa Rosa, circa 2007). I need to replace my right fan. AppleCare just expired (of course). But replacing the fan should be pretty easy, I think.
The only question is about the tape securing the fan to the heatsink. On the old fan it looks like electrical tape, but on the "sticky" side, it looks like there is a bit of copper (?) in the middle.
So my assumption is that regular old electrical tape is not appropriate, but some special kind of electrical tape. What type of tape is that?
View 5 Replies
View Related
Jun 23, 2012
I want to import photos from my Sony memory stick pro duo to iMac. My imac has SD card reader but not sure whether it reads photos from memory stick pro..
i bought this iMac in May 2011. I believe this model doesn't support Memory stick pro.
Info:
iMac (21.5-inch Mid 2011)
View 2 Replies
View Related
Nov 15, 2010
thinking about putting the image to an external, as a seperate partition.
then use the usb stick, as my usb stick. Good idea?
it looks kinda flimsy, not sure how it will hold up.
View 16 Replies
View Related
Dec 25, 2009
So my question is simple. I have the base 13" mbp. So I have 2 x 1GB sticks. Can I get 1 x 4GB stick and make that total 5GB? Or do I have to purchase in pairs (2 x 4GB)?
View 6 Replies
View Related
Apr 20, 2009
Well, I just got a replacement door because the door wasn't sealed properly after use. The hooks are more curved and the front of the device looks proper. However, there is still one corner sticking up which also makes a metallic noise when I set it down. So I tried putting some wall stickers on there, but they were too think so I found some double stick tape and stuck it on the rim surrounding the battery and then the battery itself. I might request another door from Apple, but for the moment is this a OK thing to do? I had thought about the detrimental effects of this thin plastic on the battery, but the tongue (to take out the battery) looks as if it's plastic as well.
Is putting tape on my battery to fix the door issues a bad idea?
View 6 Replies
View Related
Mar 30, 2010
I have a 1998 VHS tape of a family event I want to import into either iDVD or iMovie. I have a VHS player with both audio & tape banana plugs and the "S" connector. I have a digital Sony movie camera (about 8 years old) and it doesn't have AV & Vid inputs or an S input, only outputs. Is there any way to do this with this equipment? I would like to put the tape on a thumb drive or burn it onto a double layer DVD.
View 1 Replies
View Related
Sep 10, 2010
What is the width of the Kapton tape used in the 2007 Santa Rosa MBP?
View 2 Replies
View Related
May 16, 2009
I need to purchase some of the orange anti-static tape that Apple uses to cover the connections on logic boards. I recently fixed a MBP (2.4GHz SR 15") and need to find some tape for the board. I know it isn't a completely crucial component, however, I would like to make my computer look as if it were new. If anyone knows where to buy this tape, the exact tape, not another version, please post a reply or email me. Thank you.
View 6 Replies
View Related
Jun 3, 2014
Want to take old cassette recordings and record them into my laptop.
Have all the software - garageband, audacity, audio hijack.
Need to know about the connection, etc...
Info:
MacBook Pro, OS X Mavericks (10.9.3)
View 1 Replies
View Related
Apr 24, 2012
Have just finished movie on MacAir with material from camcorder's hard drive. No problem in transferring material from the brand new camera. I have older digital material recorded on tape cassettes by Sony videocam which I would like to re-work with iMovie11. The iMovi11 manual says transfer to the Air requires a FireWire connection. I still have the older digital camera and the cables that came with it but neither the Air nor my Toshiba laptop have FireWire ports. Any thoughts on how to effect a transfer?
Info:
iPad 2, iOS 4.3.3
View 2 Replies
View Related
Jun 25, 2012
How would I import a micro cassette audio tape onto a MacBook Pro?
View 1 Replies
View Related
Mar 9, 2012
Looking for a suggestion to which software package to use to convert my old vhs tape to digital format?
Info:
MacBook, Mac OS X (10.7.3)
View 1 Replies
View Related
Jun 2, 2012
how to record vhs tape to mac
Info:Mac Pro
View 2 Replies
View Related
Nov 9, 2007
Below is a message from BRU Technology about Mac OS 10.4.10 is not compatible with tape devices connected to Mac OS X 10.4.10 via SCSI, FireWire, USB, SAS, or Fibre-Channel.
Is anyone having issues with thier setups ?
View 4 Replies
View Related
Oct 31, 2008
Ok I still have my iworks cd from when I bought the MB. Im thinking of getting the MBA tomorrow possibly. without buying a superdrive how could I get iworks onto the MBA. if I brought it with me could they just do it at the store?
View 7 Replies
View Related
