bought my first mac (imac) and have installed my epson r300 printer using the disc that came with the printer. I have had the printer for about 4 years now.The problem I have on my PC you got the option to select paper type ie plain, photo, matt etc;. On my mac I cannot seem to find the option. I have tried page setup, print preview etc
View 3 RepliesI use a mid - 2012 Mac Pro; run Mavericks OS X 10.9.3. I have an Epson R300 that is incompatible with 10.9.3; but according to Epson I may be able to setup my R300 to my Mac Pro buy one of three ways:
1. USB: Connect your product to your Mac using a USB cable.
2. Wireless: You'll need to download and install the "Epson Wireless Setup" utility to establish the connection to your router.
3. Ethernet: My Epson printer does not have an Ethernet connection so this one is ruled out.
I am trying number 1: USB. I downloaded the Apple "PrinterProxy Version 9.0 (447)" and ran the software. Whenever I try to print something I get the following:
"Stopped - Unsupported colorspace = -1, 1 page"
What should I do to print with the above mentioned Epson printer, if possible?
This is a heads-up for owners of Epson R300 and some other Epson printers. There is an internal "counter" that at a certain point will stop the printer and announce: "service required". You will be advised to call Epson - before the printer will print again.
View 4 Replies View RelatedI am using R1900 with my macbook pro (easy print) and I cannot figure out how to set a custom paper size. My paper is A3, but the picture I want to print should only print 21 cm x 30 cm.
View 1 Replies View RelatedWhen I try to make prints on 2400 from Final Cuts Pro X, I do not see a place to select the kind of paper I want use. I see print or crop size but nothing to select Premium Photo Paper or Matt or any selection at all. I also don't see Quality selection or Preview beforee printing. I had all these things on my PC with Photoshop Elements. How does it work on Mac?
Info:
iMac, Mac OS X (10.7.3), Epson 2400 Printer
We just purchased an Epson Workforce 845 all-in-one printer to use with our 24" iMac. The OS is 10.6.8, with the Supplemental 1.1 update installed. Some printing options such as printing only the "selection" are not available. What can be done to get these options when printing with a newly released Epson printer?
Info:
24" iMac 3.06 GHz Intel Core 2 Duo, Mac OS X (10.5.8), iMac, LaCie 1 T. external drive
The wireless network I want to join runs through a Wnet R300 router with a 3.5G simcard wireless internet connection. My MacBook will not connect, while all other devices (Kindle, Nokia phone, Mac Mini, etc.) will. I have changed the wireless security on the router from WEP to WPA2 and still no luck. What settings do I need to change?
Info:
MacBook, Mac OS X (10.4.11)
After I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power.
Finally the error message: Cannot communicate with the scanner.
Info:
MacBook Pro, Mac OS X (10.7.1)
i want to do the hold shift button and highlight multiple files function ( just like window ) but i don seems to be able to do that. i wonder is it just me or the macosx system.
View 3 Replies View RelatedCan anyone tell me how to setup my printer to print to the edge of the A4 sheet instead of leaving a white border? None of my apps seems to offer a solution to this. I seem to remember being able to do it in Photoshop back when I used a PC.
View 6 Replies View RelatedAt first i thought this was simply a firefox issue, then i noticed it was accross all of my programs. I can select the regular menu, but unless I use the arrow keys, I cannot scroll down the menus into sub-menus as I had once done. For example, I used to be able to single click on say the image menu item in PS Cs3 then I would have a highlighted bar follow my mouse down (just like using arrow keys) this would open sub menus as it came across them, allowing me to access them. Now i am running into the issue that I have to hold down the left mouse button or I cannot select the sub-menus, unless using arrow key, which tends to be inconvienient. Has anyone come across this issue and if so how can I fix it? I am running permissions repairs right now and will execute the weekly, daily and monthly scripts as well and see if it helps, but if someone has insight please let me know.
View 1 Replies View RelatedNew to forum (today)
New to Mac (2 weeks)
MacBook Pro 15"/ Ptr ' HP DeskJet 952C
Can't figure out how to print selection only. Seem only to be able to print full document.
I just started using Aperture and I am befuddled. I'm working in a library that was originally created by iPhoto but was exported by Aperture, in case that's relevant. What I'm seeing is that every time I try to do a "pick" in a stack, the selection gets reset. It doesn't matter whether I use the keyboard shortcut or the menu. The browser scrolls back to the beginning of my library and suddenly the first four images are selected. Always.
The same weird thing happens if I have a search filter applied. I hit clear on the search filter and suddenly the selection is reset.
Info:
MacBook, Mac OS X (10.6.7)
I have a PDF document with 33 pages. I need to print this out, but what I want to do is have two pages print next to each other on one piece of paper. I tried looking around in Preview, but didn't find anything that would let me do this. Is there any way?
View 3 Replies View RelatedAny of you interested in Adobe products might find this PDF interesting:
[URL]
Since upgrading to Snow Leopard, I have been unable to print borderless documents from Pages.app onto plain A4 paper using my Epson R2400. Under page setup, I select A4 > Borderless Sheet Feeder but then under the print window, the option to print on plain paper is greyed out:
If I go back to page setup and change the paper size to non-borderless (e.g. standard A4) I do have the option to print onto plain paper. But of course I loose the borderless printing.
The problem with using the Premium Matte Paper setting for printing borderless is that the printouts are very saturated - obviously the printer is putting down far more ink than required. I am printing onto 350 GSM card and have used this paper for a couple of years with excellent results. Traditionally I was just printing borderless with the plain paper option ticked and the results were perfect.
I followed some advice on the internet on another forum after updating to Snow Leopard and downloaded Printer Driver v6.57 for my printer. I'm told this is the most up-to-date driver currently available and was released in June. But this does not seem to fix my printing issue and the Gutenprint drivers don't seem to support borderless printing on the R2400 either.
I've phoned Epson twice now but their support is hopeless. The first time they emailed me a link to download updated drivers, but this link started downloading a .exe file which evidently was not Mac compatible. The second time I phoned I was past between assistants for a while before receiving the textbook "revert back to Leopard or wait to see if Apple fix the problem in an update" answer.
Are there any R2400 users or others with the same problem or got any solutions? My research on the internet hasn't turned up much other than a similar issue with some Canon printers.
System Version: Mac OS X 10.6.1 (10B504)
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.30f1
I have an Epson and a Canon inkjet printer connected to my Macs, and I am trying to find profiles for different inkjet papers that I can add to the printers so that they will print correctly on the papers.
The available paper types listed in the printing options are very limited and don't include options even for the range of papers sold by the printer manufacturer.
I'm new to the world of macs and seem to be missing the A1 paper size when I need to print to my HP designjet 1050. I am using OS X 10.5
View 6 Replies View RelatedWhen I want to print a 'List' of addresses from Address Book as I do quite often, is there a way to permanantly set the 'Paper Size' to A4 instead of it defaulting to US Letter all the time? Its really annoying when you forget to change it when printing a list in a hurry! On this, Address Book 'Help' is about as useful as a chocolate teapot.
Info:
Mac Pro, Mac OS X (10.7)
Tried everything,now last option is use long paper clip to find center of where cd embedds and pop drag out.How to do this,the cd is always buzzing and I want to end this.
Info:
iWeb '08, Mac OS X (10.6.8)
My icon for Quickbooks, Skype and open office changed to a pencil, paper, ruler and will not open. Why did they change and how do I get my programs back?
Info:
Mac Pro
I downloaded Picture Selection Service and I cannot install it. I'm using Snow Leopard verison 10.6.2 on an iMac intel. I can't seen to mount the .dmg. It will not go into Applications.
View 5 Replies View RelatedFor a while I've been running a Beta version of iTunes, the one that worked with the iOS 4.2 Beta. So with the final release of iOS 4.2.1, I decided to uninstall and install the final version of iTunes. All went well with the uninstall/install, except that I noticed that in the left side bar, there is no selection for my Apps. Is this normal?
View 2 Replies View RelatedI have tried burning DVDs using iDVD program. I have had no problem creating the DVDs, as well as the scene selection. However, when I actually burn the DVD and place it into my home DVD player, I am unable to select the specific chapter markers.
View 2 Replies View RelatedI've been a PC user all my life until last week when I got an IMac and I am still learning how to use it. How do you highlight files you want to select just like how you do in windows when you hit shift key and the arrow key? It does but it highlights it one by one and I have to keep on hitting the arrow key.
View 2 Replies View RelatedI have just switched from PC to Mac, and I am at a loss as to how to print just a high-lighted selection from a web page.
I found in the print menu a way to delete headers and footers, but what if I just want to print a section from the whole page? I'm used to being able to do this with my mac, and I'm sure Mac must do it, but I can't find it in the help index anywhere.
Ok, so at my university, now, all of the Macs have Snow Leopard installed. One thing I noticed that wasn't there before was a selection screen on after booting up. They use Boot Camp, but for me, I've always had to hold Option after boot up to choose my Windows partition. My school has it real nice, after starting up it lets you click on a picture of either Mac OS X or Windows. Does anyone know if that's something native with Snow Leopard? I haven't gotten around to installing my upgrade, so I'm not sure, but I would really love that startup screen instead of having to hold down Option.
View 2 Replies View RelatedI want to be able to print only a certain selection of text on a website. Let's say the second paragraph or the address of a place. I can highlight it, but don't know how to print just that selection. I can do this on a pc by selecting "selected" when the pc print options come up. Is there a similar way in mac or do I need to copy and paste to Pages and print from there?
Info:
MacBook Air, Mac OS X (10.7.4)
System Preferences / Printers: Says No printers are available.
Clicked on + to add printer: Add screen is devoid of any printers; says "no selection" in both Name and Location fields
Printer involved:
Epson Work Force WF-3540 - have had it for about a year and it has been working with no problems
Had a printer jam I couldn't find; rebooted a few times, etc. Eventually found the jam and then the above problem started. (I'm embarrassed to say that I found a toothpick inside the printer. It was once sitting on top and must have rolled under and in.)
All software up to date, except for a Pages update.
History of where I looked and actions taken (not necessarily in order):
Library/Printers was (and still is) empty, not the least because of multiple printing system resets.
-Have attempted to restore Printers directory from TimeMachine, with no luck. Epson printer drivers were restored, but System Preferences/Printers still blank.
-Have attempted to install original printer software from disk, but it hangs in the middle, saying that no printer connection can be found, despite printing being online.
-Have attempted to run Software Update to get latest printer drivers, but Software Update says that it is up to date and won't let me rerun.
-Have run disk utility to verify: disk = okay
-Have run verify disk permissions. Had loads of permission errors related to the printer library
-Have run repair disk permissions
-Have done the last two steps many times, but disk permissions don't get fixed and original problem has not changed.
Unplugged everything, took a break, factory reset printer, started all over. Nothing worked.
Also did the RESET THE PRINTING SYSTEM. Doesn't work. OS X Mavericks: Reset the printing system
Also tried to download the drivers from Epson, but they just tell you to use Software Update and I already mentioned that doesn't work.
The only thing in the disk permissions list that looked suspicious was this message:
Group differs on "Library/Printers"; should be 80; group is 0 (repeated for various sub-directories (Icons and PPDs))
Info:
iMac, OS X Mavericks (10.9.1)
I am running on 10.9.3. I was working on my remote server and I selected files I wanted to create a new folder. By Right-clicking on the selected files and choose “New Folder with Selection (x items). The process was new to me and in the middle of it, I cancelled it. Now the original files are missing and there is not a new folder with the selected files. Did they get deleted or are they located somewhere else on the server?
View 4 Replies View Related