Hardware :: Duplexer On Epson Rx680 Not Working?
Nov 5, 2008
Have apple g4-60gig hd-2gig ram-mac os 10.5.5-brand new epson rx680 w/duplexer for printing on both sides of paper. I set it up correctly-hardware and software. When i print-the paper comes out printed about 98% of the way and stops-message pops up saying it has a paper jam. There is no paper jam anywhere! I have ckd. 8-10 different times in trying to use duplexer. Anyone else run into this problem? I am trying to talk to epson about it but seems they are slow.
View 4 Replies
ADVERTISEMENT
Aug 1, 2008
I purchased an Epson CX8300 recently to work with my iMac and MacBook. It works fine with both via USB connection. However, when set to print wirelessly via an Airport Extreme Base Station, the print jobs don't ever appear in the print queues on either systems. I tried switching to the Gutenprint driver but this just spits out one blank page after another.
View 1 Replies
View Related
Aug 12, 2010
I have an epson SX515W which i got with my new mac yesterday.
I set it up as a wireless printer and when i try to print it says printer is offline.
View 3 Replies
View Related
Jun 24, 2008
I have an iMac G5 (Power PC) with OS X version 10.4.11. I also have an Epson Stylus Color 1160 printer and an Epson Stylus Pro 3800 printer. Last August I lost access to the Utilities in my 1160 driver meaning that I could not make nozzle checks or cleans. I was emailed a lengthy procedure from Epson that would overcome the problem. Expecting this to take some time, I delayed following the advice until yesterday. Apart from the inaccessible Utilities for the 1160, both drivers were working OK. As instructed by Epson, I removed both printer drivers and first reinstalled the 1160 driver but my Printer Setup Utility could not find it. After several fruitless e-Talk sessions with Epson I contacted Apple. They told me that I had been doing everything correctly but they discovered (through Google) that the driver for the 1160 does not work with OS 10.4.11. Knowing that I had been able to use an Epson driver before I discovered through Google that a later version was available on the American Epson site. I downloaded this and the 1160 worked fine with access to the Utilities as I needed. I then reinstalled the 3800 driver but when I attempted to use it from Photoshop it did not give me the Print Settings and Color Management options that I need. I still have these options with the 1160. I have tried everything I can think of to resolve this problem and now I have even lost the access to the 1160 Utilities again. I have run the Disk Utility First Aid many times. It shows an ever-increasing list of Permissions (all problems related to Epson) but although it 'repairs' them when I verify again they are still there. I seem to be creating more problems rather than solving them.
View 1 Replies
View Related
May 1, 2012
Has anyone been able to print to CD's on Epson r320 when I try to print to the CD tray, I get an error message saying the CD tray is open and the job is automatically stopped. I found the new printer drivers for Intel machines on Epson's site and installed them. and even up dated the drivers by apple.com site . but it just keeps giving the same error and in the choose media type box , it wouldnt allow my to choose dvd/cd.
View 4 Replies
View Related
Aug 25, 2014
After the last software update my printer wasn't recognizing ink cartridge. So I uninstalled its software. Now I can't find its drivers anywhere. Epson's website says check your Mac software updates and doesn't offer to download the driver directly. But there are no available updates for my computer as of now. How do I find and install the driver?
Info:
iMac, OS X Mavericks (10.9.4), Epson Stylus Photo R3000
View 2 Replies
View Related
May 2, 2012
After I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power.
Finally the error message: Cannot communicate with the scanner.
Info:
MacBook Pro, Mac OS X (10.7.1)
View 2 Replies
View Related
May 1, 2012
I have a Firewire Epson Stylus Pro 4800 on a G4 running OSX10.2, this is on an ethernet network connected to 3 MacPros. I've just upgraded from 10.5 to 10.6 and can no longer see the Epson on the network. As Appletalk is no longer supported on Snow Leopard, is there a way to connect to the Epson? I've tried adding an IP printer using the G4's IP address with the Epson print driver, but no luck.
View 2 Replies
View Related
Jun 16, 2012
I am trying to run an Epson EMP-TW 720 projector from my mini mac. It is not showing the entire desktop, I can see the majority but not the top bar and not quite all of the bottom. What must I do, driver update?
Info:
Mac mini, Mac OS X (10.6.3)
View 2 Replies
View Related
Jun 19, 2014
I use a mid - 2012 Mac Pro; run Mavericks OS X 10.9.3. I have an Epson R300 that is incompatible with 10.9.3; but according to Epson I may be able to setup my R300 to my Mac Pro buy one of three ways:
1. USB: Connect your product to your Mac using a USB cable.
2. Wireless: You'll need to download and install the "Epson Wireless Setup" utility to establish the connection to your router.
3. Ethernet: My Epson printer does not have an Ethernet connection so this one is ruled out.
I am trying number 1: USB. I downloaded the Apple "PrinterProxy Version 9.0 (447)" and ran the software. Whenever I try to print something I get the following:
"Stopped - Unsupported colorspace = -1, 1 page"
What should I do to print with the above mentioned Epson printer, if possible?
View 7 Replies
View Related
Feb 7, 2010
I have just upgraded my Macbook 2.2GHz Intel with 2 GB RAM and 250GB HD from 10.5 to 10.6 My Epson stylus photo R1800 printer has stopped working. I have downloaded the 'drivers & utilities combo package' from the Epson website, installed, restarted etc but still nothing being printed.
View 1 Replies
View Related
Dec 3, 2010
I have a Mac OS X with 10.6.5 version software. The Guttenberg (excuse spelling) driver works but the graphics printing has faults. So I would like to get the Epson (Epson Stylus Photo r200) driver working on the Mac. The Epsom software is the latest easyprint 2009 and after installation it was available for selection in the list of available printers and seemed to install okay. I have tried reinstalling, rebooting and have followed Epson's troubleshooting pages including resetting the printers and repairing permissions.
If I click "options supplies" on the "printers and faxes window" and then "utility" and then "open printer utility" it tells me that Epson printer utility 4 cannot be executed or the printer is not registered for this software and cannot function properly using the current connections. Is there somewhere else on the computer where I have to tell it to use the USB to print or do I have to register it with the computer or with Epson?
View 2 Replies
View Related
Apr 9, 2006
This is a heads-up for owners of Epson R300 and some other Epson printers. There is an internal "counter" that at a certain point will stop the printer and announce: "service required". You will be advised to call Epson - before the printer will print again.
View 4 Replies
View Related
Sep 1, 2009
I've got an all-in-one printer (Epson DX3800) and the ink levels are not showing up in the supplies section. I've looked on the manufacturers website for drivers, but they dont have any for the mac. Is there any way in which I can get around this?
View 3 Replies
View Related
Nov 9, 2009
I have an Epson R1900 and after the update, all my colors look off when printing. I uninstalled the drivers, reinstalled them.
View 4 Replies
View Related
Mar 5, 2012
I use a MacBook Pro to print to an Epson 9800 roll printer -- been doing this for years with no problem.
UNTIL NOW! All of a sudden, the Epson is laying down huge quantities of ink, especially when I print onto film (for screen printing). It puts down so much ink, the ink dribbles down the film and drips off the printer, pooling on the floor, until I leap up and cancel the job. What's more, the printer is printing a light-colored background to images that had no background to begin with.
Here's the catch: *this only happens in Photoshop.* (I'm using CS 5.1.) If I take the same image file, place it in Illustrator, and print it, it comes out just fine. So the problem lies in Photoshop's print options. Somehow, something got changed in the last couple weeks, and I have no idea what.
I'm hoping that someone here will be familiar with this *particular* printing problem, and what the *specific* Photoshop printing option might be that is causing this.
Info:
MacBook 2.4 GHz Intel Core 2 Duo, Mac OS X (10.5.6)
View 7 Replies
View Related
Mar 7, 2012
I'm trying to add an Epson PictureMate PM 260 printer to my iMac, 10.7.3. When I plug it in I can see it in the Add Printer window, but when I try to install the driver, I get a message saying the "software is currently unavailable". I searched the epson site, but they don't seem to have drivers compatible with 10.7.
Info:
iMac, Mac OS X (10.7.2)
View 1 Replies
View Related
Mar 12, 2012
I have Mac OS 10.7.3 I keep getting the message 'there was problem connecting to server epson 6649b7. I go to that printer, which was never an active printer, but it will not allow me to delete it. The only option I am given is resume printing / supply levels / printer setup. Even if I correctly choose Epson WF600 as my default printer, I still get that message popping up constantly.
Info:
iMac, Mac OS X (10.7.3), Epson Work Force 600 printer
View 1 Replies
View Related
Mar 20, 2012
Has anyone been able to get their Epson scanner to open in Photo Shop CS3? I can open the scanner only from the Epson Scan utility.
CS3 on my desktop (Dual G4 MDD) will allow me to open the scanner directly in the File/Import menu of Photoshop with Twain.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Mar 29, 2012
Is the Mac Pro desktop compatible with Hewlett Packard and Epson products, i.e., HP Scanner G4010 and Epson Photo 1400?
Info:
Mac Pro, Considering switching to Apple
View 4 Replies
View Related
May 17, 2012
Last night, when I tried to print a document in Acrobat on my Epson 2200, I got a notice to the effect that new software was required for the 2200, and did I want to download it. Feeling comfortable that I was dealing with an Apple installation, I approved the install. Now I cannot print anything on my Epson 2200. Every print attempt fails. I have reinstalled the print driver, tried another driver (Gutenprint), but can't get anything to work.I'm running Lion 10.7.4 on an iMac with 4 Gb of RAM.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4), 4 GB RAM
View 1 Replies
View Related
May 25, 2012
I recently got a new (used) mini and now can't seem to print. The printer shows up when the printer window opens, but the printer just doesn't respond. I checked the wiring. It is connected by USB. I also looked for a new printer driver for this model, but can't find one that works with this OS
Info:Mac mini, Mac OS X (10.7.4)
View 9 Replies
View Related
Jun 30, 2012
Just out of the blue, I can't print using my epson 600, a multi use printer that I have set up on my network.
The strange thing is my scaning driver is there and working, but my wireless printer is not there. I can see my Epson Printer, but its not the wireless driver, its the older driver for using the cable.
View 2 Replies
View Related
Dec 2, 2014
Epson 835 is only printing in B&W since I updated to yosemite. I recently did the update as well.
Info:
MacBook Air, OS X Yosemite (10.10.1), can't print in color
View 6 Replies
View Related
Jun 22, 2014
I have just updated my Mac Pro to OS X 10.9.3, then my Epson Scan driver cannot work anymore... (Though the printer works...)
My Epson belongs to the "Epson Stylus SX 430" series, according to here:OS X: Printer and scanner software available for download this all-in-one machine should be compatible with OS X 10.9.3, but I can not find the proper driver software... I have downloaded some new softwares from official web. of Epson, but it did not work... It seems that Epson did not have a effective software for OS X 10.9.3....
Mac Pro: OS X 10.9.3
Epson Stylus SX 435W, Scanner cannot work because of invalid software.
View 2 Replies
View Related
Dec 2, 2014
Epson Update 2.19 has automatically updated itself 81 times since the beginning of November. In addition I get a daily warning that this update has not been made automatically coupled with an invitation to me to install it. How to stop it?
Info:
Final Cut Pro X, OS X Mavericks (10.9.5)
View 1 Replies
View Related
Dec 1, 2009
I recently purchased an IRIScan Express 2 single sheet scanner to use as a portable, After installing the IRIS, I find that my Epson 1250 flatbed scanner will not start. I am running OSX 10.5.8 on an intel mac tower. Has anyone had this problem with two scanners on the same operating system or on the same hard drive? I could use an external hard drive to run one if that is the only solution.
View 1 Replies
View Related
May 19, 2005
I have a Epson Perfection 636u scanner from 1999 and am thinking of getting a new iMac. On the Epson support page, it lists the newest driver from 1999 and says that it will work on Macintosh system 7.5 to 8.6. (here is a link http://www.epson.com/cgi-bin/Store/s...s&platform=All). Any chance of this working on Tiger? I don't see myself buying a new scanner because I use it just a few times per year.
View 4 Replies
View Related
Oct 4, 2006
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
View 11 Replies
View Related
Feb 10, 2009
anyone know where to find it?
View 5 Replies
View Related