Just out of the blue, I can't print using my epson 600, a multi use printer that I have set up on my network.
The strange thing is my scaning driver is there and working, but my wireless printer is not there. I can see my Epson Printer, but its not the wireless driver, its the older driver for using the cable.
which driver should i use for the epson LX300 matrix-dot printer??? I dowloaded all drivers for epson but i didn't find the driver for the LX300.
Info:
epson LX300 matrix printer, Mac OS X (10.7.4)
I have two perfectly good printers, but the drivers for my MacBook Air are said to be unavailable on the epson site.
Info:
MacBook Air, Mac OS X (10.7.4), Epson Stylus CX3200 & CX42OO printe
I've just loaded mac OSX 10.5.1 onto my Powerbook G4, and I've lost my Epson Stylus Colour 860 printer driver?
I've gone into the Print & Fax Pref's to add a printer, but there are no printers listed?
I've also looked on the Epson printer drivers to download and there doesn't seem to be any to support any OS later than 9?
I have MACBOOK G4 OSX 10.4.11. Which driver do I need for the Epson Stylus PHOTO RX620 (and where do I get it?
Info:
MacBook
I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any. In "Printers and Scanners" in System Preferences I notice that the computer is aware that I am connected to the printer (via USB) but a message at the bottom of the window says that "Software for this printer isn't available from Apple. Contact the printer's manufacturer..."
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1), printer driver
Can I toggle between Air Print and an Epson printer driver? The only way I can print directly on CDs with my Epson XP-810 is to use Epson's driver. Normally, I'd prefer to use Air Print.I'm running OSX 10.9.4.
Info:
2.8 GHz Intel Core 2 Duo iMac, 4 GB SDRAM, 931.19 GB drive
I have an Epson Perfection 3170 Photo scanner. It is a fine scanner that has served me well for many years through many different operating systems, Windows as well as Mac OS X. The scanner software is no longer supported by Epson for OS X Lion. The only way I can now san is by using the drivers that are built into the OS. I can access the scanner either through System Preferences/Print & Scan, or use Image Capture. Unfortunately, all the scans are of an extremely poor quality. I can no longer scan fibrant colors or stong blacks, the entire scan is now murky and all colors as well as the blacks and greys are faded.
Info:
iMac, Mac OS X (10.7.3)
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
After I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power.
Finally the error message: Cannot communicate with the scanner.
Info:
MacBook Pro, Mac OS X (10.7.1)
I have Mac OS 10.7.3 I keep getting the message 'there was problem connecting to server epson 6649b7. I go to that printer, which was never an active printer, but it will not allow me to delete it. The only option I am given is resume printing / supply levels / printer setup. Even if I correctly choose Epson WF600 as my default printer, I still get that message popping up constantly.
Info:
iMac, Mac OS X (10.7.3), Epson Work Force 600 printer
I have a new MacBook Pro running on Lion and an older Epson stylus photo printer/scanner RX420. I downloaded a new driver from Epson and can now print but the scanner still doesn't work.
Info:
MacBook
Pro, Mac OS X (10.7.3), Epson stylus photo RX420 printer
downloaded Lion and now doesn't recognize Epson printer or Preview
Info:
iMac, Mac OS X (10.7.2)
I recently upgraded our iMac OS to 10.7. Now the computer doesn't recognize the Epson Workforce 845 printer. I uninstalled the printer in system preferences. Now what do I do to install the printer again and use it wirelessly?
Info:
Mac OS X (10.6.8), 3.06 GHz, Core2Duo, 4GB 800 MHz RAM
In the office where I work with my Mac there's a Canon copier/scanner model iR2318. Months ago I downloaded and installed the Lion compatible drivers required that worked fine. Yesterday (with no reason, no changes, nothing at all: just working) the printer started to refuse to print as it asked for a different paper format: A4 or Letter. Despite many attempts to specifically send print jobs in A4, which is the paper format loaded in the tray, the printer continued to refuse all prints.Today I ended up removing the printer from the list, as it became unnecessary, and I also liked to uninstall the printer driver as well, since Canon released a newer version.Currently, when trying to reinstall the printer, 2 drivers are displayed: UK and US. This lets me assume that those 2 drivers are still installed in my system: I wanted to remove both of them and start from scratch by reinstall the driver and he printer as the system was new. How can I remove the driver, so that Lion won't recognize it and that I could make a clean install of the previous working printer?
Info:
MacBook Pro, Mac OS X (10.7.4)
I had a Dell 1100 laser printer working on my iMac (G4 ball type) using a GIMP printer. I had to reset the queue and lost the driver. I can't remember which GIMP driver I used. Also, although I have loaded the latest GIMP s/w, I can't seem to get to them in Tiger 10.4.6.
View 24 Replies View RelatedI have installed the generic PCL Laser Printer driver in order to use my Samsung ML-6060 printer, because Samsung no longer supports this printer for macs.
For several weeks the generic driver worked beautifully. Now I'm having a problem. When I print a document the printer puts out a blank page other than the letters OE in the upper left corner. The next page is the document itself. I tried uninstalling and re-installing the driver with no success.
P.S. I need to correct my computer description. I have returned to System 10.8.5 on my Mac Pro (early 2008) desktop.
Info:
PowerMac, OS X Mavericks (10.9), 2 x 2.8 Ghz Quad-Core Intell Xeon
I am desperate to find the correct driver for the p205b docuprint printer I know that the one on the fuji site is wrong and you need to install a driver for another model as I found this in a forum last year and successfully installed on another mac but now I don't know where I got the info from.
Info: iMac
I'm trying to add an Epson PictureMate PM 260 printer to my iMac, 10.7.3. When I plug it in I can see it in the Add Printer window, but when I try to install the driver, I get a message saying the "software is currently unavailable". I searched the epson site, but they don't seem to have drivers compatible with 10.7.
Info:
iMac, Mac OS X (10.7.2)
I have an Intel Mac Mini
I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
I just updated my Mac I Book G4 from OSX 10.3 to 10.4. Now when I click on my Epson Smart Panel icon to start scanning I get a message that says Install the supported twain driver. I have downloaded the Epson Twain Driver v 2.77. I am told I need to uninstall the old Twain driver. How do I do that?
View 1 Replies View RelatedJust loaded snow leopard and my Epson Sylus Photo rx580 won't print?
Info:
MacBook
Pro, Mac OS X (10.6)
I would like to use a perfectly good Canon Pixma ip4200 printer with OSX Mountain Lion 10.8.5 and Yosemite 10.10.1 on my 2013 model iMac but Canon say they do not do a driver for these more recent versions of OSX later than 10.7. Is there any way to get this to work?
View 1 Replies View RelatedAfter initial problems loading the driver of the CD I was advised the do a software update on my iMac and to download the latest driver from the Epson site in the U.S. Having done all of that and successfully loaded the software the iMac still cannot find the printer driver when trying to add a printer.
I have previously loaded everything and have printed via usb but have not been unable to print wirelessly. Has anyone any clue as to what I might try?
I have an Epson V200 Photo that has a button called "Send to Email" when it is invoked it loads Mail. I would like it to load Thunderbird instead of Mail. Does anyone know a way to modify the driver to do this? I contacted Epson and got nowhere.
View 4 Replies View RelatedI want to connect a wireless Epson XP 510 printer. Installed drivers from the Epson website but they do not appear to be compatible according to the drop down list in the apple menu for adding a printer.
Info:
iMac, Mac OS X (10.5.8), Epson XP 501
I have a Mac OS X with 10.6.5 version software. The Guttenberg (excuse spelling) driver works but the graphics printing has faults. So I would like to get the Epson (Epson Stylus Photo r200) driver working on the Mac. The Epsom software is the latest easyprint 2009 and after installation it was available for selection in the list of available printers and seemed to install okay. I have tried reinstalling, rebooting and have followed Epson's troubleshooting pages including resetting the printers and repairing permissions.
If I click "options supplies" on the "printers and faxes window" and then "utility" and then "open printer utility" it tells me that Epson printer utility 4 cannot be executed or the printer is not registered for this software and cannot function properly using the current connections. Is there somewhere else on the computer where I have to tell it to use the USB to print or do I have to register it with the computer or with Epson?
I purchased an Epson CX8300 recently to work with my iMac and MacBook. It works fine with both via USB connection. However, when set to print wirelessly via an Airport Extreme Base Station, the print jobs don't ever appear in the print queues on either systems. I tried switching to the Gutenprint driver but this just spits out one blank page after another.
View 1 Replies View Relatedanyone know where to find it?
View 5 Replies View RelatedI've been using the Epson R340 printer w/my g4 forever. Now all of a sudden I can't print. I've reinstalled drivers from epson's website, nothing. Then I found some existing epson drivers on my HD using spotlight. Tried installing those, but repeatedly got "could not install hardware, there were some errors". What's strange is that via Epson Printer Utility I can do nozzle checks, ink level checks, etc., which tells me the computer is connecting w/the printer. Except when it comes to printing.
View 10 Replies View Related