I've just tried to install the epson drivers for my printer Epson Stylus Photo R220, went to their site and downloded the driver, installed and resarted.
Then installed the Epson Print CD application that comes with the CD, and installed, however when i try to print to CD an error states:
"The epson print driver dealing with CD printing is not installed"
I've looked on the CD and on their site and cannot find anything.
Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again. Then, if the Print dialog box has a [Printer Info] button, acquire the printer information.: 10322
I'm trying to add an Epson PictureMate PM 260 printer to my iMac, 10.7.3. When I plug it in I can see it in the Add Printer window, but when I try to install the driver, I get a message saying the "software is currently unavailable". I searched the epson site, but they don't seem to have drivers compatible with 10.7.
Just out of the blue, I can't print using my epson 600, a multi use printer that I have set up on my network.
The strange thing is my scaning driver is there and working, but my wireless printer is not there. I can see my Epson Printer, but its not the wireless driver, its the older driver for using the cable.
I've just loaded mac OSX 10.5.1 onto my Powerbook G4, and I've lost my Epson Stylus Colour 860 printer driver?
I've gone into the Print & Fax Pref's to add a printer, but there are no printers listed? I've also looked on the Epson printer drivers to download and there doesn't seem to be any to support any OS later than 9?
I just updated my Mac I Book G4 from OSX 10.3 to 10.4. Now when I click on my Epson Smart Panel icon to start scanning I get a message that says Install the supported twain driver. I have downloaded the Epson Twain Driver v 2.77. I am told I need to uninstall the old Twain driver. How do I do that?
I have an Epson Perfection 3170 Photo scanner. It is a fine scanner that has served me well for many years through many different operating systems, Windows as well as Mac OS X. The scanner software is no longer supported by Epson for OS X Lion. The only way I can now san is by using the drivers that are built into the OS. I can access the scanner either through System Preferences/Print & Scan, or use Image Capture. Unfortunately, all the scans are of an extremely poor quality. I can no longer scan fibrant colors or stong blacks, the entire scan is now murky and all colors as well as the blacks and greys are faded.
After initial problems loading the driver of the CD I was advised the do a software update on my iMac and to download the latest driver from the Epson site in the U.S. Having done all of that and successfully loaded the software the iMac still cannot find the printer driver when trying to add a printer.
I have previously loaded everything and have printed via usb but have not been unable to print wirelessly. Has anyone any clue as to what I might try?
I can't find the yosemite driver for my new epson r3000 printer. I am using 10.10.1. The Epson website says to find the driver by going to the App store and looking for updates. I did that and didn't find any. In "Printers and Scanners" in System Preferences I notice that the computer is aware that I am connected to the printer (via USB) but a message at the bottom of the window says that "Software for this printer isn't available from Apple. Contact the printer's manufacturer..."
Info: MacBook Pro with Retina display, OS X Yosemite (10.10.1), printer driver
Can I toggle between Air Print and an Epson printer driver? The only way I can print directly on CDs with my Epson XP-810 is to use Epson's driver. Normally, I'd prefer to use Air Print.I'm running OSX 10.9.4.
I have an Epson V200 Photo that has a button called "Send to Email" when it is invoked it loads Mail. I would like it to load Thunderbird instead of Mail. Does anyone know a way to modify the driver to do this? I contacted Epson and got nowhere.
Last night, when I tried to print a document in Acrobat on my Epson 2200, I got a notice to the effect that new software was required for the 2200, and did I want to download it. Feeling comfortable that I was dealing with an Apple installation, I approved the install. Now I cannot print anything on my Epson 2200. Every print attempt fails. I have reinstalled the print driver, tried another driver (Gutenprint), but can't get anything to work.I'm running Lion 10.7.4 on an iMac with 4 Gb of RAM.
Info: iMac (27-inch Late 2009), Mac OS X (10.7.4), 4 GB RAM
I recently got a new (used) mini and now can't seem to print. The printer shows up when the printer window opens, but the printer just doesn't respond. I checked the wiring. It is connected by USB. I also looked for a new printer driver for this model, but can't find one that works with this OS
I am trying to find a print server that works with the epson sx200 all in printerThe netgear ps121v2 looks OK however netgear do not list the printer as being supported same is for the d-link server.Epson only recommend there own server at �140 mmmm !!!!As any body tried the netgear or d-link with this printerPS I only have one printer which I want to share with my imac and macbook pro via a netgear wireless router
I just got the Epson workforce 615 and after hours of trying to connect this printer to my airport I give up....
Does anyone have step by step instructions on how to do this?It just does not want to connect to my airport network no matter what I do. I have downloaded all the drivers/software off the epson site to no avail.
I've been at this all nite and I am fed up. Can someone please tell me how I can print a panoramic print on roll paper using CS2 on a MAC (so please now windows advice) using an epson pro 4000? I constantly get the message that the wrong paper source is selected. Roll paper is fed into the printer, I select A2 roll paper (any of the A2 roll paper options), or I try a custom paper size (42x120 cm) on page setup. For paper I select velvet fine art paper (I don't really know what kind of paper it is to be honest), because that will select the rear feed. Unless I am mistaken (quite possible) the rear feed is used by roll paper.This does not work. I tried setting to A2, but then I get only an A2 size part of my print, and still it won't print anyway with the same annoying message. I don't have these problems with my R1800. With the R1800 I just select roll paper and everything automatically prints perfect, but not the pro 4000, can someone please explain to me what settings I have to use in page setup of CS2 and what settings I have to use in the printer driver of the pro 4000 printer ?
I am on OS 10.3.9. My Epson Stylus CX4600 will not print a Word document from this computer. It will prints a document from my older laptop, which has OS 9. And it will make copies when it is plugged into the OS 10.3.9. It will even print a test pattern when the utilities function is open. But it will not print an image or a Word doc or an Appleworks doc that is stored on the OS 10.3.9.
I have upgraded my soft ware to Snow leopard and now my almost brand new Epson SX 515W copier printer and scanner will not print. Massage Error:/ System/ Library/ Pri always appears. have ried down loading also disinstalled printer and reinstalled.
Well, after sitting on the snow leopard fence for a while, I decided to install it this weekend. I now am unable to print to my Epson Artison 800 printer. Apparently I need a Driver for it, but the Epson site is a bit confusing when trying to select exactly what I need to download.
i have a time capsule and i conect a epson nx100 to usb port to print wireless, the printer work perfec when i use it via my usb port (i have a macbook air), but i cant prinr via time capsule, i dont have any error mesagge, when i open the control panel of the printer it says that the printer is ok, all the jobs said are completed.
I purchased an Epson Stylus NX530 printer with wireless capability. I have a MacBook Pro running OSX v10.7. My printer is installed and works as expected when connected via USB cord but printer shows up offline when USB is disconnected. I connected my printer to my wireless network through my router (entering name of connection and passcode) and enabled the sharing capabiliy in System Preferences. So my setup is that I connected my MacBook to my router and my printer to the router. Is there anything else I am missing? Would connecting both the computer and printer to the wireless router be all I shoud need to do to be able to print wirelessly? Is my wirelss router considered my "network?" If my printer has a wireless internet connection, should I be able to "view" it anywhere on my MacBook other than printer settings when it is not connected via USB (I had to initially connect my computer via USB to the printer during setup).
