I've got an all-in-one printer (Epson DX3800) and the ink levels are not showing up in the supplies section. I've looked on the manufacturers website for drivers, but they dont have any for the mac. Is there any way in which I can get around this?
View 3 Replies
I have the above printer connected to my iMac and it has been working flawlessly for months. I have one issue though. When the printer is running low on ink, the maintenance light blinks, indicating low levels. But, it doesnt tell what ink cartridge is low, and since i dot want to go all out and change them all, i need to know how to view levels. On my Mac, it only says information not available for supply levels, and as far as I know, there is no way to check on the printer itself. Does anybody know how to view the ink levels, either on the printer or my iMac?
View 7 Replies View RelatedI can't check ink levels on my epson stylus r320
Info:
MacBook Pro, Mac OS X (10.6.8)
How do you get the supply levels for the Epson Stylus Photo 1900 to appear in the printer utility window?
Info:
iMac, Mac OS X (10.7.2)
After I installed Epson Printer software version 2.1 and I totally lost the communication to Epson V700 Scaner, the scanner keep reset the power.
Finally the error message: Cannot communicate with the scanner.
Info:
MacBook Pro, Mac OS X (10.7.1)
Last night, I was having issues with the illuminated keyboard. It would flicker on and off, but when I restarted the machine, I had no issues. This morning I wake up and press the F6 key to brighten it up and see of its working, and the levels wont move at all, and all i get is the O with the through it. something I did possibly? Im in Greece right now, so its going to be hard to get it to an Apple store. The only time I will be able to do that is when my Aunt goes back to NY. She can take it there for me and ship it back.
View 6 Replies View RelatedMaybe I'm just not seeing it, but is there any way to adjust iMovies audio levels (besides the basic fade in/out) or having it fade out when another clip comes in. Is there a way to control the volume of any part of an audio clip?
View 2 Replies View RelatedMy iMac is running 10.5.8. When I play music from within iTunes the volume is far lower than if I use front row (I make no changes to the volume level manually). Is there a setting somewhere I need to change to bring the iTunes level up to the same as the level when using front row? Internal speakers are being used, not external ones.
View 2 Replies View RelatedI just realized that when my printer is plugged into my AirPort, it does not let me see ink levels. Is there a workaround to this?
View 9 Replies View RelatedI am running a Dell S2209W on my 13" Macbook uBody, a pro without FW if you will. Anyway, not sure exactly what is bothering me but after a while, my eyes feel strained. I have calibrated it using the SL built in calibrator and while it is better than out of the box, I still feel eye strain. Anyone else using this monitor and are you happy? Any tricks to calibration levels? Or is this an issue with SL color levels, gamut, etc.? I am seriously considering going to the U2410 for height and tilt capability if nothing else.
View 3 Replies View Relatedwhen I'm playing something in iTunes, in the small window centered over the Library, I now get an audio level bar display instead of what I would call the normal, default display (shows the item being played, artist, title and all that, plus a progress bar showing where you are in the piece). I can't find a thing about this online elsewhere so far, and have no idea what the iTunes nomenclature for this function or the small centered window above the Library.
Info:
MacBookPro, Mac OS X (10.6.8)
Whenever my screen is not turned up to the maximum brightness, a really high pitched sound is emitted from the laptop. If you've ever heard the "mosquito ringtone", that's basically what it sounds like. Really odd. It's definitely got something to do with the screen brightness, and I basically can't use my laptop at medium brightness because the sound drives me a little nuts. Turning the brightness to the lowest setting makes the sound less intense, but it's still audible.
View 2 Replies View RelatedA couple days ago I upgraded my mid 2010 MBP 13 stock hdd(Hitachi 5400rpm 250gb) to a new one (Hitachi 7200rpm 500gb 7k500). I am still amazed by how much faster and more responsive system has gone.
Some change in noise/vibration was expected, but now I am starting to get a bit annoyed by vibration and HDD noise.
Vibration gets on my nerves- the levels are nowhere high, but there was no vibration in my stock HDD. In addition, the noise of the system on idle has roughly doubled- both fan and HDD are humming at the same level.
The system is still very quiet, but I could not help noticing it anyway. Is this normal?
I tried replacing the old HDD and found out that the problems were not present with it (=I am not likely to have made some awful mistakes putting the hard drive in).
Then I tried tightening all the screws as hard as possible and putting some rubberized washers on the corners of the HDD to ensure snuggly fit. All efforts rendered no change. Are there any other methods to reduce noise and vibration?
Furthermore, I still have one day to return the 7k500 without any loss. Should I get WD Scorpio Blue 500gb instead?
I have read user reports of similar problems with WD SB 640gb drives as well. Since these drives are essentially the same, I would expect similar problems with 500gb as well.
P.S. Is there any chance that the stock HDD is slightly "downclocked" by Apple? It does vibrate a lot inside external cradle. Furthermore, I tested a couple laptops in the local Apple store. Both MBP 15" and MBP 17" where equipped with 500gb 5400rpm drives.
However, MBP 17" was vibrating much more than the MBP 15" (maybe MBP 17 HDD runs at its native speed to increase the performance. The increased size of 17" makes the vibration effects less annoying).
The stock HDD vibrates just like the current one until after 1-2s after the power button is pressed- as if some sort of regulation kicks in after that point.
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies View RelatedI just plugged headphones into the headphone port on my iMac(dual core 2.4) I went to system preferences, sound, then output and only the internal speakers show up. I rebooted the machine and still, same thing.
I tried the same headphones on the eMac sitting next to it, and it worked just fine. Still confused about the iMac
My email messages for one Google account no longer show up in my OS X Mail client.Case info:This may have occurred after I enabled the 'All Mail' to Apple Mail for the account, then removed it once I saw it was adding every single message I deleted since the beginning of time. Still, that doesn't explain the following...My email messages for another Google account does show up in my OS X Mail client. They have exactly the same IMAP settings other than username and password.My email messages for the account that doesn't work, shows up fine on my iPhone/iOS and gmail.com.None of the messages in the inbox or folders/labels show up. The count is zero. However they all show up fine in folders in iOS and on gmail.com.There is an indicator for one new message in the inbox, but none show.
Info:
MacBook Pro, OS X Yosemite (10.10.1), Mid-2010
I have a Firewire Epson Stylus Pro 4800 on a G4 running OSX10.2, this is on an ethernet network connected to 3 MacPros. I've just upgraded from 10.5 to 10.6 and can no longer see the Epson on the network. As Appletalk is no longer supported on Snow Leopard, is there a way to connect to the Epson? I've tried adding an IP printer using the G4's IP address with the Epson print driver, but no luck.
View 2 Replies View RelatedI am trying to run an Epson EMP-TW 720 projector from my mini mac. It is not showing the entire desktop, I can see the majority but not the top bar and not quite all of the bottom. What must I do, driver update?
Info:
Mac mini, Mac OS X (10.6.3)
I use a mid - 2012 Mac Pro; run Mavericks OS X 10.9.3. I have an Epson R300 that is incompatible with 10.9.3; but according to Epson I may be able to setup my R300 to my Mac Pro buy one of three ways:
1. USB: Connect your product to your Mac using a USB cable.
2. Wireless: You'll need to download and install the "Epson Wireless Setup" utility to establish the connection to your router.
3. Ethernet: My Epson printer does not have an Ethernet connection so this one is ruled out.
I am trying number 1: USB. I downloaded the Apple "PrinterProxy Version 9.0 (447)" and ran the software. Whenever I try to print something I get the following:
"Stopped - Unsupported colorspace = -1, 1 page"
What should I do to print with the above mentioned Epson printer, if possible?
I have just upgraded my Macbook 2.2GHz Intel with 2 GB RAM and 250GB HD from 10.5 to 10.6 My Epson stylus photo R1800 printer has stopped working. I have downloaded the 'drivers & utilities combo package' from the Epson website, installed, restarted etc but still nothing being printed.
View 1 Replies View RelatedI have a Mac OS X with 10.6.5 version software. The Guttenberg (excuse spelling) driver works but the graphics printing has faults. So I would like to get the Epson (Epson Stylus Photo r200) driver working on the Mac. The Epsom software is the latest easyprint 2009 and after installation it was available for selection in the list of available printers and seemed to install okay. I have tried reinstalling, rebooting and have followed Epson's troubleshooting pages including resetting the printers and repairing permissions.
If I click "options supplies" on the "printers and faxes window" and then "utility" and then "open printer utility" it tells me that Epson printer utility 4 cannot be executed or the printer is not registered for this software and cannot function properly using the current connections. Is there somewhere else on the computer where I have to tell it to use the USB to print or do I have to register it with the computer or with Epson?
This is a heads-up for owners of Epson R300 and some other Epson printers. There is an internal "counter" that at a certain point will stop the printer and announce: "service required". You will be advised to call Epson - before the printer will print again.
View 4 Replies View RelatedI have an Epson R1900 and after the update, all my colors look off when printing. I uninstalled the drivers, reinstalled them.
View 4 Replies View RelatedI use a MacBook Pro to print to an Epson 9800 roll printer -- been doing this for years with no problem.
UNTIL NOW! All of a sudden, the Epson is laying down huge quantities of ink, especially when I print onto film (for screen printing). It puts down so much ink, the ink dribbles down the film and drips off the printer, pooling on the floor, until I leap up and cancel the job. What's more, the printer is printing a light-colored background to images that had no background to begin with.
Here's the catch: *this only happens in Photoshop.* (I'm using CS 5.1.) If I take the same image file, place it in Illustrator, and print it, it comes out just fine. So the problem lies in Photoshop's print options. Somehow, something got changed in the last couple weeks, and I have no idea what.
I'm hoping that someone here will be familiar with this *particular* printing problem, and what the *specific* Photoshop printing option might be that is causing this.
Info:
MacBook 2.4 GHz Intel Core 2 Duo, Mac OS X (10.5.6)
I'm trying to add an Epson PictureMate PM 260 printer to my iMac, 10.7.3. When I plug it in I can see it in the Add Printer window, but when I try to install the driver, I get a message saying the "software is currently unavailable". I searched the epson site, but they don't seem to have drivers compatible with 10.7.
Info:
iMac, Mac OS X (10.7.2)
I have Mac OS 10.7.3 I keep getting the message 'there was problem connecting to server epson 6649b7. I go to that printer, which was never an active printer, but it will not allow me to delete it. The only option I am given is resume printing / supply levels / printer setup. Even if I correctly choose Epson WF600 as my default printer, I still get that message popping up constantly.
Info:
iMac, Mac OS X (10.7.3), Epson Work Force 600 printer
Has anyone been able to get their Epson scanner to open in Photo Shop CS3? I can open the scanner only from the Epson Scan utility.
CS3 on my desktop (Dual G4 MDD) will allow me to open the scanner directly in the File/Import menu of Photoshop with Twain.
Info:
MacBook Pro, Mac OS X (10.6.8)
Is the Mac Pro desktop compatible with Hewlett Packard and Epson products, i.e., HP Scanner G4010 and Epson Photo 1400?
Info:
Mac Pro, Considering switching to Apple
Last night, when I tried to print a document in Acrobat on my Epson 2200, I got a notice to the effect that new software was required for the 2200, and did I want to download it. Feeling comfortable that I was dealing with an Apple installation, I approved the install. Now I cannot print anything on my Epson 2200. Every print attempt fails. I have reinstalled the print driver, tried another driver (Gutenprint), but can't get anything to work.I'm running Lion 10.7.4 on an iMac with 4 Gb of RAM.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.4), 4 GB RAM
I recently got a new (used) mini and now can't seem to print. The printer shows up when the printer window opens, but the printer just doesn't respond. I checked the wiring. It is connected by USB. I also looked for a new printer driver for this model, but can't find one that works with this OS
Info:Mac mini, Mac OS X (10.7.4)
