Desktops :: Printer And Scanner Don't Work After OS X Upgrade?
Apr 27, 2010
A few days ago I finally upgraded my iMac G4 (Flatpanel) from 10.4.9 to 10.4.11. I had not printed or scanned anything since then, but today I needed to do both, and they don't work. I think it has something to do with the upgrade because they were working just fine before that.
The printer is an Epson Stylus 777i
The Scanner is an Epson Perfection 640U
What could have changed, and how can I get my Mac and peripherals to work together again?
I upgraded to Snow Leopard and now my printer scanner won't work. It says it cannot recognize my computer. I have installed a few updates available and restarted and it still won't work.
I can print wireless but I can not scan wireless. Why? I am connected by wire from the canon 490 direct to my airport so why is it the scanner will not work? Can anyone explain ?
how to get the scanner on a Canon MP800 scanner/printer to scan with Lion software. I've installed the Canon Version 3.0.4 driver but it still doesn't work.
Info: iMac (24-inch Early 2008), Mac OS X (10.7.4)
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
Lion and now my HP Laserjet 1200 printer won't work? I've downloaded the appropriate driver from the Apple site and it's not on HP's list of printers that won't work with Lion?
I've browsed the site for awhile now, but this is the first time I've had to post.
I recently tossed my old printer due to the scanner going bad, and picked up a new one. It's an Epson NX400. I've gone through the install disk, done what needs to be done, but I've got a problem.
Whenever I go to add it in the printer utility window, all I can do is highlight it. To clarify, it's showing up just fine under the 'Printer Name' section, and the 'Name' and 'Location' both fill in with the appropriate information when highlighted, but the 'Add' button doesn't become selectable.
It forces me to look through the 'Print Using' window, where the desired printer is nowhere to be found. This also happened when I tried hooking up an HP printer.
I've been scratching my head going through every support site I could find, but I'm giving up. Anyone familiar with a fix?
Esteemed List: I have an Epson Stylus CX6000 copier-printer-scanner. I have a newish Intel 2.13 GHz MacBook, OS 10.6.2 (Snow Leopard) with 2 GBs SDRAM and PhotoShop Elements 8. I migrated all my compatible software from a G4 12" PowerBook running OS 10.3.9, including the Epson software package - printer drivers, scanner, etc. - and the printer/copier works fine but neither Elements nor the laptop recognize the scanner software. The Epson site has a "complete" driver update for Snow Leopard that supposedly covers these issues. There is a warning that some parts of the drivers require OS 10.5, which this laptop never had. My question: is it safe to download and install these updated drivers? Do you have any suggestions?I do a fair amount of scanning work and need to access the Epson.
White 2.13 GHz Macbook, OS 10.6.2, 2 GBs SDRAM; Epson Stylus CX6000, Epson Scan 2.90 software; Epson Printer Utility and Epson Printer Utility 2.
Anyone care to offer a recommendation for a Mac-compatible all-in-one (printer/copier/scanner/ +/-fax)?
I am thinking about the Canon PIXMA MX860. My only concern about it is I currently have a (much) older Canon that uses Canon's MP Navigator 2.0 software and I find it somewhat clunky and buggy (and the included OCR is crappy).
Curious if anyone knows if the MX860 comes with better Mac software. Or if there are better alternatives to this all-in-one.
I need to find a good scanner / printer for an Intel MAC for my COO, laser if possible but not necessary. I'm more interested in something that has scanning software or can be used by Adobe Acrobat to scan PDF's etc. Something that won't need all kinds of third party to actually use the scanner.
I have an hp photosmart 4200 that is plugged into an airport base station.
One problem though... When I scan something I have to break out my laptop and plug it into the printer directly to get the scan. The printer, as far as I can tell won't send out the scan via the airport.
If I buy the new photosmart with wifi & Bluetooth and put it in the other room will it send my scans to my iMac in the other room?
Sounds like it should but I've yet to see that work.
i have old dell desktop (without monitor), lexmark all in one printer (which does not support Mac OS), Samsung laser printer (which also does not support Mac OS), Windows Laptop and a NEW iMac with wireless broadband router.
Question is because the old printers are not compatible with new imac, I need some solution to print and scan.
My options are:
- Connect old printers to desktop PC tower and connect PC tower to router via ethernet and use printers via sharing.
- Connect printers to windows laptop as needed but this restricts the use.
- Get rid of the two printers and desktop tower (which is not needed for anything else) and buy a new wireless all in one printer which works over both mac and windows. I can get �30 for the old desktop at local trader but nothing for printers as they are deemed worthless.
So I purchased a brother MFC 290C so I could both print and fax.
I was able to hook it up to my airport extreme base station (the n version) and set up the printing function from multiple computers. So I am happy with that.
However I am unable to set up the network scanning function because I need 1 of 2 pieces of info:
Either the IP address for the printer OR the mDNS service name..
Now the printer is hooked in to the base station using the USB port. What is the easiest way to find its IP address? I am not allowed to enter anything for mDNS, I have to browse, and I can not see any choices when I browse for it.
Dell 3115cn Multifunction Printer..Does anyone have any information how to use the Dell 3115cn scanner on Mac OSX macbook pro? Or rather has Dell updated the driver permitting us to use the scan function via usb?
Apple published a report url...that states system 10.6.8 supports the HP LaserJet 4MV. If this is accurate information, I would like to know where the drivers are located. I have spent more than three hours with your technical support and no one has a clue how to make this combination work.
Info: MacBook Pro (15-inch Mid 2009), Mac OS X (10.6.8)
I just purchased a Canon MG5220. I have installed all of the updated drivers for 10.7.3. The scanner is working wirelessly, but I can't add my printer.
I upgraded my PowerMac Dual G5 2 GHz from OS 10.4.11 to 10.5.8. Now the Mac can't see my SCSI scanner (Epson Exprerssion 836XL). It doesn't show up under the system profiler.
Before upgrading, I cloned my 10.4.11 installation. When I boot from the clone, I can use the scanner with no problems. So the hardware is working and connected properly.
What is there about the Leopard system I can do to help it recognize the scanner?
The problem has survived system restarts, including restarts after complete shutdown.
I got iMac on my office. There is network issue on my iMac Desktop. When my computer remains idle for long time (sleep) and wakes up again, I can ping into the same network device (say 192.168.0.0 network) but I am not able to ping into other sub net (say 10.2.0.0, printer network).
Restarting iMAc resolves the problem or unplugging the cable and connect to some other Laptops and connect back to iMAc works again (I mean I can access other networks again). I turned of auto-negotiation and tried renew DHCP Address but it still doesn't solve my problem. Restarting the computer and unplugging the cable and plug-in back is not a solution for me.
I have an eMac 700 MHz with OS X 10.3.9 My original HD (40 G) is almost max out and I would like to upgrade to a big HD. : Type of HD I need?; What is the biggest it permits?; and How would I do it, without loosing data.?
I read here that scan software for the HP OfficeJet 4215 under OS 10.5 was being tested and almost ready for release. That was in October, 2009. I can't find it anywhere. The HP download site says that the scanner function of the 4215 is not supported under 10.5. Does anyone have suggeestions on how I can get the scanner to work? Everything I try says, "No Image Capture Device found."
Info: iMac (20-inch Early 2008), Mac OS X (10.5.8)
My HP Scanjet 3970 has never been to happy with my Mac running snow leopard. But it has always worked in the end. But now maybe because its OSX 10.6.4 it just wont recognize the scanner is there.
Anyone know of a way around this? I can't even remember what I did last time, I know it tok days but I got there in the end! I don't use the scanner much, and this one is perfectly good, so I really don't want to have to get another one.
