I moved in with family who have a PC and router (Netgear) through charter (cable provider).
However I've had an imac g3 450MHz for the past 8 years and it still works fine..except..
The OS is 10.4, and I seem to have a problem connecting to internet with wireless. Apparently somehow the original airport software was deleted. I did purchase an airport card and adapter and successfully installed that.
However my problem is getting airport software back on my Imac. I tried installing Airport 3.1 however my computer insists its already installed so it won't install the airport software. But a search confirms that there is no airport any longer on my Imac.
I bought an airport extreme card in 2006, and haven't tried installing it until this morning (always been hardwired!) Can't seem to figure it out now, as the card seems too small for the slot on my Powerbook G4.
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
I'm having a problem when I connect my 42" Plasma HD to my mid 2009 Mac Mini, the mini cannot connect to the internet via Airport. I have a 20'' Dell display connected to the Display port and the Plasma connected to the mini-DVI port and I'm running snow leopard. When I disconnect the plasma from the min-DVI port all goes back to normal and there is no Airport issue.
I've spent the past few hours attempting to connect my new Windows 8.1 laptop to my iMac's Airport signal without any success. Â I was able to do this very thing using Windows 7 on an old laptop. From what I've been reading, it seems that the ability to connect to networks secured with "WEP-Shared" type security has been removed in Windows 8 because of the fact that it was outdated and insecure. It's great that Microsoft is trying to force individuals to be secure, but unfortunately the iMac's airport utility does not offer any alternatives.
I attached my Imac to the Airport and the printer to the Airport. It's a Canon Pixma MX700. The airport utility sees the printer but when I try to print, the Imac does not see the printer. I hardwired the Imac to the Airport because I assumed the connection speed woud be better. Could this be the problem? I am able to get on-line from my laptop PC so I know the thing is working. I have not tried to print from the laptop.
I want to do a clean install on my mac. It is starting to act up a little and I want to just clean it up and start over. I have parallels with windows 7 on the computer with office 2010.
I also have cs5. After I wipe and reload snowleopard can I reinstall my applications with the old serial numbers or are my serial numbers all used up? do i need to uninstall thm before the wipe?
Wiped clean and installed Snow Leopard, ran boot camp wizard and gave the windoze partition 100 GB, then rebooted.
No matter what disc I try to boot from (Windows 7 burned, Windows 7 pressed from microsoft, Windows XP SP3) I just get a black screen with white lettering in the top left that reads:
113-B22505-011 M74 GDDR3_16Mx32 64bit
Haven't been able to find anything on google. I figured the win7 might be problematic due to the way microsoft makes their discs (have had to burn mac-friendly dvd versions in the past) but I can't figure out why the XP cd wouldn't work...
I'm currently trying to install virtual PC 7 on my iMac. The initial part of the install runs ok, but once I click on complete, I get an application quit unexpectedly message.
If I reboot the mac, and try and manually run the VPC7 app to complete the install I just keep getting the message.
I own every piece of software and hardware from Apple there is and I cannot understand that it seems that everything is about the iPad and iPhone right now. I have been having these issues since I got my 27" iMac. I can install Windows 7 just fine on my MacBook Pro and my previous 24" iMac.
Ever since I got the 27" iMac I get a black screen when installing Windows. I have found some posts that have a way around it, which seemed to have worked but now I am getting the blue screen of death. Doesn't matter if Windows 7 is supported by Apple or not but Boot Camp is and it should be corrected.
There is no excuse that after 6 months this issue has still to be addressed, all Apple talks about now is iPad and iPhone, I am sick of it. BTW I own an iPad and I don't see the big fuss about it, I bought it mainly to read books and watch Netflix on the go.
My brother got an iMac and yesterday he tried to install windows xp with boot camp. But unfortunately he made a mistake and the iMac shut down. Now the mac is stuck with a windows xp in it, and when he tries to start up the computer, it says "the start-up sound" and just stays with white screen. It sounds like the mac reads from the xp cd when it starts, but I can't get the cd out.I have looked everywhere and tried everything:
Hold down the primary mousebutton while it's starting, Hold down "fn" and the "eject" button while it's starting, and hold down "alt" while it's starting
I can't find any "pin-hole" to a paperclip or something.
Got an iMac G5 manufactured in 07' (PPC) from a relative and I am trying to erase the HD and restore.I'm putting the disc in it gives me a kernel panic screen- Grey install disc 10.4.10 Not sure what the heck is goin on here. New to mac's this is what code is shown at top of kernel panic screen- cpu 0 caller(0x002E59BC) Unable to find driver platform PowerMac 12, 1
I have an old Airport Express (A1088).I am running OSX 10.9.4 - I have downloaded Airport Utility 5.6 and yet cannot install - I am getting "This version of Mac OS XÂ on this volume is not supported".Unfortunately no PC or old Mac available. I used to be able set up on IOS but cannot do that anymore either.Any clues how to re-setup this old airport that works ok.
Info: MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.4)
I'm an IMac newbie, so please excuse me if this is "old" information. However, I've done a lot of searching and can't find a "simple" solution. Maybe there isn't one. Again, please excuse me if this is dumb...Just got a new 27" IMac. I have a Dell AIO 966. I know now there is no OEM driver. But, I thought there was a Lexmark driver model (that might show up in the OX 10 install process I could substitute, or a Generic driver. So far, no luck. And frankly, some of the things I am reading when I search are either old, old posts or too complex for me.
Is the simple answer, "get a new printer?" Or, is there a usable driver loaded into OS X? Is there a thread or post that I am missing?
When I am on my wireless network at home, I cannot print to my printer (via AirPort).When I go to the router and connect with ethernet cable, the AirPort magically detects itself in seconds.I have Windows 7 computers running bonjour and they can print just fine using AirPort.I was able to print fine wirelessly to the AirPort but today it's not working.
At first, I tried to upgrade and the upgrade failed to the point of rendering the system useless. I then decided to reformat the drive using disk utility and try a clean install. I then got this error and I'm stuck and have no clue what to do now: "The installer can't extract files from the package for BaseSystem. Contact the software manufacturer for assistance." I have never encountered anything like this before.
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
I am trying to install Aim Sniff which runs through terminal. I am slowly figuring out how to use terminal to run .pl files but the readme files says I need to install these dependencies.
Code: Requires Samba to perform SMB lookup features.
i have tried to re-install leopard into my macbook but it is just all a mess. i inserted leopard cd (original copy) into macbook to do a clean install to my new(to me) used macbook. the computer message after choosing language says "cannot install mac osx on this computer".
1. used disk utility to reapair disk...did no work 2. erased hd..still did not work. 3. made partition to install from external hd...now just made a total mess with computer. 4.i try to start computer from dvd drive with original leopard cd...still does not work. says cannot install mac osx to this computer...
i have macbook intel core duo 1 gig ram and enough memory.
I would like to install an internal airport card in my Mac pro (2008) as I didn't order the wireless BTO option and the USB adapter I tried instead didn't satisfy me. When I asked for the card at an apple reseller they said to me that this upgrade would cost a lot of money because they haven't only to order the card but they have to install the antennas as well. I went home and checked the interiors of my machine and saw three antenna cables (labeled with 1,2,3) which seem ready to be connected to an airport card. So I don't know if I have to believe this antenna thing. Are the antennas already preinstalled in every Mac Pro or do I really have to bring the whole computer to the store?
I gave a fella a hand the other day by pointing him to a post I had on my site. I thought I'd list in in a new thread for others to see too. So if you want to add 802.11n to your Mac Pro, see how I did it. [URL:...]
I have an early 2008 Macbook Pro 17", and after installing 10.5.8 I am experiencing the widely reported airport issue everyones banging on about! So much so that I've been relegated to trailing an ethernet cable all the way into my front room because it keeps cutting out so much.
The only difference is I am on mains power (with the lid closed) because I use a large external monitor.Anyway long story short, I noticed the Airport update on Apples website after searching:[URL]_MacBook_Prohowever when I try to install it I get this:I have the Macbook Pro 17" Early 2008 model the update lists and I have the problem but it won't install!
My Specs: Model Name:MacBook Pro Model Identifier:MacBookPro3,1 Processor Name:Intel Core 2 Duo Processor Speed:2.4 GHz
I bought a new modem today (ATT 2wire wireless router with modem). I am trying to install my airport extreme, but keep getting the dreaded flashing amber light and an error message telling me that the airport is not connected to the internet.
I'm using a iMac PowerPC G5 that I've received from my brother. He gave it to me with a fresh install of Leopard on it, but he unfortunately no longer has the disc that came with the computer that he also used to format it before handing it to me. With that said, I ordered a new internal hard drive. Naturally, I'll need to re-install Leopard, but I don't have an install disc anywhere. How is this going to be possible? Or will it not be? Do I have to buy a new Leopard install disc? If so where and how much?
I got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
I am trying to install the Airport Client update that was released yesterday on my 2.4 GHz Aluminum UniBody 13" MacBook running 10.5.8. However, I get the error message saying that it does not meet system requirements.
i bought a lot of 5 eMacs at my local auction. i got 4 700mhz and one 1.0ghz. when i turned on the 700mhz i noticed that it had a card installed. now my question is how do i take it out? I ask b/c i wanna put it in my clamshells instead.
