Windows On Mac :: Unable To Install IMac/m74 Gddr3_16mx32?
Dec 16, 2009
Newish 20" iMac (black border around glass).
Wiped clean and installed Snow Leopard, ran boot camp wizard and gave the windoze partition 100 GB, then rebooted.
No matter what disc I try to boot from (Windows 7 burned, Windows 7 pressed from microsoft, Windows XP SP3) I just get a black screen with white lettering in the top left that reads:
113-B22505-011 M74 GDDR3_16Mx32 64bit
Haven't been able to find anything on google. I figured the win7 might be problematic due to the way microsoft makes their discs (have had to burn mac-friendly dvd versions in the past) but I can't figure out why the XP cd wouldn't work...
View 2 Replies
ADVERTISEMENT
May 1, 2010
I own every piece of software and hardware from Apple there is and I cannot understand that it seems that everything is about the iPad and iPhone right now. I have been having these issues since I got my 27" iMac. I can install Windows 7 just fine on my MacBook Pro and my previous 24" iMac.
Ever since I got the 27" iMac I get a black screen when installing Windows. I have found some posts that have a way around it, which seemed to have worked but now I am getting the blue screen of death. Doesn't matter if Windows 7 is supported by Apple or not but Boot Camp is and it should be corrected.
There is no excuse that after 6 months this issue has still to be addressed, all Apple talks about now is iPad and iPhone, I am sick of it.
BTW I own an iPad and I don't see the big fuss about it, I bought it mainly to read books and watch Netflix on the go.
View 3 Replies
View Related
Mar 29, 2010
My brother got an iMac and yesterday he tried to install windows xp with boot camp. But unfortunately he made a mistake and the iMac shut down. Now the mac is stuck with a windows xp in it, and when he tries to start up the computer, it says "the start-up sound" and just stays with white screen. It sounds like the mac reads from the xp cd when it starts, but I can't get the cd out.I have looked everywhere and tried everything:
Hold down the primary mousebutton while it's starting,
Hold down "fn" and the "eject" button while it's starting,
and hold down "alt" while it's starting
I can't find any "pin-hole" to a paperclip or something.
View 8 Replies
View Related
Feb 1, 2010
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
View 3 Replies
View Related
Dec 20, 2009
The internal hard drive on my early 2009 iMac is being replaced but I have to reinstall Snow Leopard myself.I did search in MRoogle and at Apple and cannot seem to find instructions on how to perform a clean Snow Leopard install on an iMac internal HD.
Can I do this? And if so how? Or do you think I should try and install Leopard on the existing Hd in the iMac? I still have these discs but have to get the SL applications install disc out of my drive (it's stuck and the iMac won't boot past the blue screen).
View 5 Replies
View Related
May 13, 2009
I have parallels 4 installed and I want to install windows XP. My school gives us legal copies of windows 98 and a windows xp upgrade. However, neither of these comes in the form of a CD image. They are both .exe files. Parellels asks for a CD or CD image. Is there a way to install windows 98 from an .exe in parallels?
And if so will I be able to use the windows xp upgrade once i have windows 98 installed? I haven't yet tried creating a CD image with the exe file on it. I don't know if this would work because it's all in one file and not a typical windows install disk.
View 3 Replies
View Related
Jul 9, 2010
I installed Windows XP SP3 and it installed just fine. I went and bought the Snow Leopard OSX DVD from the Apple Store. The bootcamp installed, etc. now that I tried to install a game, it worked.
Upon start up, it's asking for Direct X, installed that as well. Then it said that it failed because I don't have the driver. I checked and the driver is non-existent for graphics.
View 1 Replies
View Related
Aug 14, 2010
So i gave a friend of mine a hand with his 2009 27" i7 iMac by installing Windows 7 for him. Unfortunatly for some reason after you get through all the meat of the install and it restarts to finish off and ask for personal information but here's the problem. The display is showing nothing! You can hear the fans are on and booting into mac is fine but I can't get any farther with the Windows 7 installation because i can't see anything! I know the disc works because I installed from it the night before.
View 3 Replies
View Related
May 9, 2012
So i have a Mid 2010 iMac 27" - 2.93 Ghz. i7, 16 GB, with a 2 TB Drive, and 10.7.3 running on it. About a month ago, my Superdirve broke, and i cant install anything. As i need my Computer due to work, i bouth an Asus BD + DVD + CD - Combo-Drive-thingy, which works perfectly fine, BUT now i wanted to install Win8 Consumer Preview over my Win7.
Firstly i couldnt, because you cant do that with the Installer on 32 bit, to install 64 bit Then i tried it via Bootcamp, so i had to delete the old drive. Then i wanted to make a new one via the Bootcamp Assistent, downloaded the Drivers, burnt them, and put the Win8 DVD in the Asus Drive. Then it told me to put the Windows DVD in, because he didnt recognise it from the Asus Drive. But i cant, because the Superdrive is broken. So i rebooted, and i got into the Windows Install Thingy, but aswell this didnt recognise the DVD because the Drive is only connected via
2 USB Ports. So next, i made a Win8 Install USB-Flashdrive, and this should work perfectly fine normally, but just aswell, it didnt recognise it. So then i installed rEFIt, and tried to get to the installer with that, somehow. no chance.
Info:iMac, Mac OS X (10.7.3)
View 13 Replies
View Related
Sep 16, 2010
I am trying to partition my Macbook to install Windows and am having the following error
"The disk cannot be partitioned because some files cannot be moved.
-Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
View 6 Replies
View Related
Nov 19, 2010
I can't get VMWare to install their tools that supposedly helps with the Win7 drivers. However, i have the Win7 drivers for my MBA from a previous attempt to install Boot Camp. They are in my MBA dowload/drivers folder and on a USB thumb drive. But the VMWare install won't look at either. It only wants to look in 3 places.
A: floppy drive (haven't had one in many years)
CD drive D: VMWare tools (which is no help at all)
Boot X: drive
View 2 Replies
View Related
Jan 13, 2010
So I've finally got all the partitions sorted out from my previous OS setup, and go to install Windows 7. Partway through the setup (just after asking language) it asks for CD/DVD drivers. Okay, I'll try eject the disk. Nope, eject key not working. So I can't put the disk with all the drivers in. I'll copy the drivers to my external HDD. When I browse for them, I am told there's nothing there. So, I don't know. I can't install the drivers it would seem (unless someone can find the CD/DVD drivers for windows?) and therefor cannot continue with the installation because it wont let me click next until these damn drivers are installed. Windows 7 64 bit, by the way.
View 4 Replies
View Related
Mar 17, 2009
trying to install windows xp using parallels 5. i downloaded and iso file for windows and i double clicked it and it showed on the mac desktop, BUT parallels wont install windows from that. i am sorry if there is a thread already on this matter. i know i am doing something wrong but cant figure it out since i am new to all this.
View 5 Replies
View Related
Jun 12, 2010
I have installed parallels 5 desktop onto my macbook pro and am trying to set it up to run win XP. All goes well untill it gets to the part of the windows installation that highlights "installing windows" the everything just stops, and stays stuck on "setup will take approximately: 36minutes" At the very bottom in the grey area it says: "Parallel tools are not installed, when I click to install these, nothing happens!
View 3 Replies
View Related
Sep 11, 2010
I've been googling like crazy and just can't find any real answer. I have a 24" iMac and installed Windows 7 64 bit.
I managed to install the Boot Camp drivers from my Leopard disc but I now have no sound - not that I had it before installing the drivers.
Figured it must be an issue with the old Boot Camp not entirely supporting Windows 7 and tried to install the newer drivers from my Snow Leopard disc (the one I got with my Macbook Pro - late 2009) but I can't run these.
First I try to run the setup file in the Boot Camp directory on the disc but it gives me an error which says: "Boot Camp x64 is unsupported on this computer model.
" So I try to run the BootCamp64 file in the Boot Camp/Drivers/Apple directory on the disc, but this gives me another error: "This installation requires elevated privileges. Launch this installer through setup.exe."
So what am I supposed to do?
View 1 Replies
View Related
Jan 20, 2010
Just heard about the new support for Windows 7 yesterday.
I have a copy of Windows 7 Pro x64 (Downloaded an ISO from DigitalRiver and burned to a DVD. I paid for the license back in october. it was a digital download.)
I was going to download the 3.1 bootcamp update, but saw it was an exe which I guess means I have to install it in Windows after I install the OS?
Followed all the instructions listed here:
[URL]
Everything seems to install fine, it goes through the whole process and then restarts which leaves me with a black screen ever after 30 mins.
I tried doing the whole process over again from the beginning while I went to the store. Came back and it appeared the computer was sleeping so I clicked the magic mouse and the computer awoke with a black screen still.
(Found this interesting because doesn't that mean the bluetooth is working fine?)
I am at a loss guys? What should I do to get Windows 7 Pro x64 working on my iMac?
P.S. this is the imac I have:
27-inch: 3.06GHz, ATI Radeon HD 4670 graphics with 256MB, 4GB RAM
View 17 Replies
View Related
Nov 23, 2010
My internal DVD is not working anymore and I want to install Windows.
I know it is possible to install Windows using an external DVD on a Macbook Air.
But is it possible on an iMac.
Since I have problems doing this, I ask the question in this forum ?
To be specific: my problem is that the screen remains gray, when I select to boot from an external DVD containing a bootable iso of windows 7.
View 3 Replies
View Related
Jan 5, 2010
how to Install Windows 7 on 27" iMac?
View 6 Replies
View Related
Oct 24, 2009
I just spent the past 5 hours trying to install Windows 7 via BootCamp on my new 27" iMac.
It would get past the initial installation and then after the final reboot just before it runs off the hard drive and asks you for a serial number, the screen would go black and I couldn't do anything.
So I found this solution here:
[URL]
Except the instructions on that site are for an iMac with an NVIDIA Graphics Card. The 27" iMac has an ATI card. So at step 6 I deleted the file named: ATIKMDAG.SYS from the same directory.
Then clicked restart and was able to finish through the install process.
Summary: (from a response below)
The way the iMac 27" DisplayPort works in the system, when installing windows it will output to BOTH the iMac screen and DisplayPort.
When Windows 7 install is reaching a certain point it is making a choice as to which display it believes it the primary display. ]
If you have a display plugged into your iMac's display port or have that ability you will see your install is working just fine, the problem is just that windows believes the active displayport on the back of the iMac is the primary display and moves all video to the port..
that is why you see a black screen. Rebooting and doing the driver deletion steps does work as it will allow windows to run on a generic driver unable to make that choice.
Note: you will need an additional monitor and a Mini-Display Port adapter to plug the monitor into the iMac to use the above method.
The BootCamp driver that loads only give a max resolution of 1980 X 1440 so everything looks stretched. Installing the ATI drivers from ATI did no good. (See the update below to fix this)
Also be aware that only the keyboard will be active during the install so you will need a usb mouse unless your really good at navigating Windows with only a keyboard.
UPDATE:
After installing Windows 7 if you run windows update there is an update available for the ATI card. Once installed and restarted the resolution is now fixed.
When you go into the resolution settings in Windows 7 the display now shows up as a color LCD and the max available resolution is 2560 x 1440.
View 24 Replies
View Related
Nov 16, 2010
I want to do a clean install on my mac. It is starting to act up a little and I want to just clean it up and start over. I have parallels with windows 7 on the computer with office 2010.
I also have cs5. After I wipe and reload snowleopard can I reinstall my applications with the old serial numbers or are my serial numbers all used up? do i need to uninstall thm before the wipe?
View 5 Replies
View Related
Dec 11, 2009
i have the following question: i installed windows 7 on my mbp but i have problems with a lot of games that i want to install, so i think that i have to update my drivers. if i install the drivers from the nvidia site for windows 7, will they mess up my nvidia drivers on my osx part of my mbp?
View 3 Replies
View Related
Dec 24, 2009
Okay, I'm about to go crazy over this. I have a 24" mid 2007 iMac; 2.4 C2D. I purchased a legal msdn download of Windows 7 Professional; 64-bit with my education discount. I currently have Windows XP on my bootcamp partition. I knew that I would have to do a clean install, but I've been unable to do anything. First, I burned the ISO onto a dvd using microsoft's utility. When I restarted and booted, it came up with:
1.
2. Select CD-ROM type
...and hangs there. I looked up a lot of stuff, and then burned the ISO in another imaging app. I've tried installing from boot camp setup assistant, booting from the disk, even tried installing inside of VMWare Fusion. Nothing has worked. I would do the USB thumbdrive installation, but from what I understand, the EFI doesn't permit you to boot from USB.
View 5 Replies
View Related
Jun 13, 2009
Here is the situation:
I moved in with family who have a PC and router (Netgear) through charter (cable provider).
However I've had an imac g3 450MHz for the past 8 years and it still works fine..except..
The OS is 10.4, and I seem to have a problem connecting to internet with wireless. Apparently somehow the original airport software was deleted. I did purchase an airport card and adapter and successfully installed that.
However my problem is getting airport software back on my Imac. I tried installing Airport 3.1 however my computer insists its already installed so it won't install the airport software. But a search confirms that there is no airport any longer on my Imac.
In any case, I'm not able to get on the internet.
View 2 Replies
View Related
Feb 20, 2010
I'm currently trying to install virtual PC 7 on my iMac. The initial part of the install runs ok, but once I click on complete, I get an application quit unexpectedly message.
If I reboot the mac, and try and manually run the VPC7 app to complete the install I just keep getting the message.
View 4 Replies
View Related
Feb 11, 2012
Got an iMac G5 manufactured in 07' (PPC) from a relative and I am trying to erase the HD and restore.I'm putting the disc in it gives me a kernel panic screen- Grey install disc 10.4.10 Not sure what the heck is goin on here. New to mac's this is what code is shown at top of kernel panic screen- cpu 0 caller(0x002E59BC) Unable to find driver platform PowerMac 12, 1
Info:
iMac, Mac OS X (10.4.10)
View 1 Replies
View Related
Oct 13, 2009
I have an alu iMac, the kind that apple says could not support x64 bootcamp 2.
Having done a bit of research, I followed the instructions on installing the x64 mac pro bootcamp drivers on this computer, and since then have been using Vista x64.
Now, with snow leopard, I'd like to upgrade to bootcamp 3, and once again I am faced with apple's "this machine isn't supported".
Can someone point me in the right direction to get bootcamp 3 x64 drivers installed?
Would I have to dig up the first gen mac pro x64 drivers?
Is apple supporting x64 on the first gen mac pro?
Should I just install every single x64 driver off of the snow leopard installation disc?
View 2 Replies
View Related
Nov 11, 2009
Has anyone had success installing Win7 x64 on a new iMac?
I know the previous gen didn't support it. I am wondering if the new ones do.
Because of some of the gaming I do, I would really like support for more than 4GB of RAM in Windows.
I searched around and found some limited references to people attempting it.
View 24 Replies
View Related
Nov 26, 2009
I was trying to install Windows 7 onto my machine and now it appears that the hard disk is ruined. Instead of the Apple logo during startup there is a question mark that flashes. I was told by the Apple people that it was a hard disk problem and that it now needs replacing.
The DVD drive in the iMac has not been working for a while now. I'm currently contemplating how to go about fixing this. I do have an external blu ray player from which I should be able to boot but I don't know how. Can someone please tell me how I can fix this problem? I currently have a non functional iMac.
If I open up the Imac and replace the HDD will the problem fix itself? Will the iMac want to re-install OS X?
View 6 Replies
View Related
Oct 20, 2009
I'm an IMac newbie, so please excuse me if this is "old" information. However, I've done a lot of searching and can't find a "simple" solution. Maybe there isn't one. Again, please excuse me if this is dumb...Just got a new 27" IMac. I have a Dell AIO 966. I know now there is no OEM driver. But, I thought there was a Lexmark driver model (that might show up in the OX 10 install process I could substitute, or a Generic driver. So far, no luck. And frankly, some of the things I am reading when I search are either old, old posts or too complex for me.
Is the simple answer, "get a new printer?" Or, is there a usable driver loaded into OS X? Is there a thread or post that I am missing?
View 3 Replies
View Related
Sep 9, 2010
I can't figure this out. My iMackeeps shutting itself down part way through the Windows 7 Boot Camp install. I can't get it completed. Usually about at the point were files are copied it turns off.
Is it possible the fans are not working properly while booted to a CD causing it to overheat and shut down?
View 6 Replies
View Related
