IMac :: Sharing & Permission Options For A System?
Sep 5, 2010
I first had was the computer names for the iMac was set to MacBook and the actual macbook names switched to MacBook (2). I figured out how to change that, simple enough. On going problem is that now on the iMac I am set to admin but cant view other users folders they have the minus sign in the bottom corner of the folder and some folders and files have the Name "Staff" for permissions. The only users should be myself "TJ" and my wife "Laura". The MacBook is fine with just her and I as users but the iMac is goofy with "staff".
View 7 Replies
ADVERTISEMENT
Apr 26, 2010
In iTunes when I right click on a song and click "get info", then change some info, it doesn't stick. It goes right back to what I already had in there before. I then realized that this is because every file inside my iTunes music folder is set for "read only" and not "read & write". So after I change it to "read & write" all changes I make in iTunes will take. However, I have a lot of music and therefore a lot of files inside my iTunes music folder. Going into each and every folder to change its permission to "read & write" would be tedious and time consuming,
View 8 Replies
View Related
Oct 18, 2008
I just noticed on my main boot drive, in the sharing and permissions section. Their is a user named ''unknown'' This unkown user has read only permissions, and is grayed out. I have tried removing this user by clicking the minus sign. It has no effect. I cant change their privilege level either. I can do this with the other users listed. The ones that aren't grayed out.This (unknown) user is not listed with the rest of the users. Found in the sharing options, under system preferences. In fact all sharing options are turned off. I don't have a wireless network, nor do I run time machine.
View 3 Replies
View Related
Jan 7, 2011
Is smcFanControl still the best to use to increase rpm's on fans for macs? Or is there anything new out?This iMac get EXTREMELY HOT on the top left corner it can burn your hand how bad it is.The atual temps are within limits with istat but that excessive heat on the back left top corner is concerning me. If i keep my hand on it for more then 5 seconds it will actually burn my hand.
View 4 Replies
View Related
Jan 13, 2010
this will sound more complicated a setup than it really is..I have the following all connected together:iMac 21.5" (Late-2009 spec Denon AVR-3806 Amp Panasonic TH42PZ80 full-HD Plasma TVNow, for audio I have a simple optical to coaxial convertor which feeds directly into the input on my amp. With this I get full 5.1 surround
View 3 Replies
View Related
Apr 7, 2009
New folders created on a network are unable to be accessed by other users on the same network in Leopard OSX 10.5.6. The original user is the only one able to access the folder. You should be able to go to 'Get Info' on the folder and change sharing and permissions at the original user's mac, so that all users on the network are able to read and write to that folder. Leopard OSX doesn't not allow the change to be made. The selections are not ghosted out, but the appear available to be selected. No matter which you choose 'read & write', 'read only' the 'no access' option remains. We can go to a different mac on the network that has Tiger OSX and change the sharing and permissions of the folder in question. Why can't I easily do the same on the originating mac?
View 1 Replies
View Related
Dec 29, 2009
What would show more immediate quality of graphics and faster on-line refresher rates, a graphics card with more ram or double the memory? Im debating whether to get the 512mb ATI Card or an additional 4 gig or Memory with my new iMac.does Apple not offer the really high end ATI Cards with 1 gig of ram?
View 7 Replies
View Related
Jun 28, 2010
I've searched online and in threads here on the "can I use an iMac as a monitor" question, and found mostly negative answers. One exception seems to be the 27" model connected via mini-Display Port.However, I'd been hoping to connect an older (G4/DVI) Mini to a new (21.5") iMac, to use the iMac as a monitor.The only semi-hack solution I've seen is to use Screen Recycler or similar software. I have two questions, though:-Can Screen Recycler be used to mirror a desktop, not just extend it? (all info I've seen talks only about extending/2nd monitor, not mirroring).
-How's the performance?
View 2 Replies
View Related
Apr 6, 2012
I clicked on the sharing button in the settings panel and nothing is there! No options what so ever. This is the only set button that exhibits this behavior. I have a 13" 2010 Macbook Pro 2.26 running Lion 10.7.3.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jun 12, 2012
Neither file or web sharing options appear in OSX Server 10.5.8. Had a so called expert migrate our old G4 server up to a newer G5 with 10.5.8. The job has never been finished and we cannot connect our accounts and other PCs to the network.
View 2 Replies
View Related
Mar 17, 2010
I want to share 1 aperture 3 library with multiple users. I do NOT want them to have any deleting or adding control.I want to share 1 itunes library. I want multiple users to HAVE control. I know it has something to do with the share folder.
View 1 Replies
View Related
Jul 3, 2012
I recently took the plunge and installed Lion after being content with Snow Leopard....well now I have quite a few issues. When I open system preferences for some reason it automatically opens to Network...why I'm not sure. When I click show all, then click sharing, I can't make any changes in the Sharing preferences without my entire system locking up. I can't force quit or anything. I can still use the mouse but all I have is the rainbow wheel!
I have searched and searched and haven't been able to fix it. I have tried booting into the Guest account and the same problem happens there. I have trashed all the plist files everyone says to try. I have tried repairing permissions etc. I feel like I have tried everything. Is there anything else that I can do without have to do a clean re-install. I'm hearing if I do this that I won't be able to migrate my files from by backups due to permission problems?
I also took a look at my system log and it is full of this!
Jul 3 22:24:26 jessica-imac com.apple.launchd[1] (com.apple.Kerberos.digest-service[1307]): Exited with code: 1
Jul 3 22:24:26 jessica-imac com.apple.launchd[1] (com.apple.Kerberos.digest-service): Throttling respawn: Will start in 10 seconds .....
Info:
Mac OS X (10.7.4)
View 1 Replies
View Related
Apr 20, 2009
I am running an iMac G5 Version 10.5.6 (Leopard) and I have activated every security feature I can find.
I have disabled all sharing, I have disabled guest access, I have the firewall up allowing only essential services, and I am in stealth mode.
In spite of this, he is obviously able to see every website I visit, and I am afraid he can view my email or the court documents etc. on my machine.
When I click on my harddrive icon, I can see his machine, listed as PC server, under 'sharing', even though I have disabled all sharing!!
There does not seem to be an option to disconnect him, or block him.
View 1 Replies
View Related
Jul 1, 2012
Intel Mac wont start after I changed my hard drive permission to let me read and write, then I clicked apply to all enclosed files. I turned it off no problem. Then it never started up again in os x. The grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. I can start up in windows xp, but I don't know how to do anything in windows xp that will affect os x. I can use the hard drive in target mode. I use a macbook to view target disk. I do not have the os install disks.
Info:
iMac, Mac OS X (10.7)
View 10 Replies
View Related
Mar 21, 2009
I have two imac computers networked both running Leopard OS. Mac1 connects to the 2wire ADSL router via Ethernet. Mac2 connects via wireless. Wireless signal is strong. Both computers can connect to the Internet. Both computers can share files with each other. Firewalls set to allow all incoming connection.
Cannot ping from either computer to the other. Error message: Permission Denied. Using the terminal for pinging has the same results. Have not found a solution search the forums. Would like to solve this problem before attempting to add a windows xp laptop to the network.
View 6 Replies
View Related
Jan 8, 2010
my MBP has been really underperforming. Things take longer on my Macbook, then on my 10yr old machine with 512mb of ram and openbox. Also, firefox, has been going extremely slow, and crashing. I'm not using beta, and I have opened it in safe mode, and it still crashes.I know there must be something wrong. Both my brother and some of his friends with macs have also been experiencing stuff slowing down. So the first thing, I though it might be is that there is an update, or something like that. So I updated, but no go. It's still slow. And just the other day, I got to see this for the first time.
View 13 Replies
View Related
Oct 30, 2010
I keep getting a sending error report when trying to email direct from iPhoto 11.
As I understand it, iPhoto pulls all address details direct from Mail so why would it falter.
View 2 Replies
View Related
Apr 28, 2009
I have a Macbook Pro and have been using Microsoft Entourage to automatically connect to and download my e-mail from my college's mail server. All of a sudden my internet got really slow. I began looking around and found that it was probably a DNS issue so I added 4.2.2.1 and 4.2.2.2 to my DNS server list and my internet began to work nice and speedy like it use to. The only problem is that whenever I added these I can no longer access my school's mail server. At this point I am completely clueless and really don't want to have to pick between e-mail access and fast internet.
View 4 Replies
View Related
Jul 11, 2009
When I try to start up my mac, It doesnt work. A folder icon appears in the center with a question mark, which then changes to the finder logo. (thats as far as it gets)I'll do anything to fix the problem, even if it means clearing all my files. I have no startup disk though, if that's a problem.
View 5 Replies
View Related
Oct 29, 2009
I recently reformatted my mbp because the filesystem crashed and I couldn't repair it. Everything works fine except it beach balls a lot now and it's driving me crazy. It will beach ball quite frequently for like a minute or 2 randomly. This never used to happen until I reformatted it. I ran the disk utility repair and it still beach balls. I think its just a bad install. I have the Early08 MPB and Snow Leopard.
View 8 Replies
View Related
May 7, 2010
i'm wanting to build a desktop hacintosh. But i also want the get pretty much the top of the line hardware. I'll also be installing windows 7 for games. I'm wondering if os x will run on core i7s, and also what specific hardware is compatable with os x? CPUs, Video Cards, Ram ETC. I have a 13 inch MacBook Pro but i am planning to sell it. I need a significant upgrade for everything i plan to be doing with computing in the next year.
View 7 Replies
View Related
Apr 27, 2008
This feature was available in Tiger and dropped in Leopard. Actually there is a compress PDF feature (either via an applescript that can be downloaded) or using Quartz filter "reduce filesize". However, when dealing with bitmap figures embedded in the PDF, both solutions in Leopard yield very dissappointing results. Whilst in Tiger, the results were outstanding for both file size reduction and maintaining the bitmap clarity.
View 3 Replies
View Related
Sep 4, 2010
I just got my first Mac yesterday, 13" MacBook Pro. I LOVE IT! I've been trying to find out some info on the battery calibration that I can't find anywhere. I have tried Apple's website, Google and MRoogle before I made a new thread about it
View 1 Replies
View Related
Oct 31, 2010
In the process of doing clean install from tiger to leopard and I'm running into some issue. 1st attempt - was stuck on initial "Install" screen (After I erased my HD and selected drive to install but before the Install screen changes to show the status of the install remaining) for 35 minutes. I stopped the install and restated.2nd attempt - Finally got to the progress bar, 28 minutes remaining. However, it didn't move from there. I checked the Installer Log and it kept trying to install printer drivers and foreign fonts, but unsuccessful. Finally got an error message stating install was not complete. Restart.3rd. attempt - This time I unchecked printer drivers and fonts. Progress bar stated 18 minutes, now it's down to 17 (after like 10 minutes) and according to the Installer Log I keep getting errors in stuff (Error writing caches to /Volume/...., Input/output error, Failed to enumerate /Volumes/...., Cannot prune("com.apple.user*pictureCache*"). However, according to the progress bar, it keeps moving through the processes, still show 18 minutes now.
View 2 Replies
View Related
Dec 11, 2010
I have a MacBook that is running leopard. After running a volume repair that failed I tried to restart my laptop, but when it gets to the blue loading screen, it takes forever and then shuts off. I can still run the Mac os x installer. When I go to disk utility, the Macintosh hd tab is visible, whereas it wasn't available before. Okay scratch that it isn't available anymore. Though, I just clicked on startup disk and it is visible there.
View 1 Replies
View Related
Aug 28, 2006
I can't figure out how to print double sided using my MB. It works fine in windows, but I can't even find the option to do so in OS X. I'm using various different HP printers and can't do it with any.)
View 14 Replies
View Related
Mar 4, 2008
I do not know if this has been posted before or not...But I found [as have others] that it is a GOOD idea to exclude all of the Parallels .HDD files from a Time Machine Backup. Parallels stores the entire Windows "hard drive" as a single file under OSX, and while this is transparent to the end-user, any time any "windows" file is updated [ie. everytime you do something under Windows], that ENTIRE file is marked as updated.
View 7 Replies
View Related
May 3, 2008
I'm one of the folks who got an early 2008 MacPro, ordered the day after they were announced. Besides the 8800 GT card, I also have 4 GB extra OWC RAM and 2x500 GB WD hard drives installed.My problem (and I tried searching, didn't find anything) is that it I accidentally bump the tower, like with my knee since it sits under my desk, it will restart. I've tried padding the side that's up against a leg of my desk, but it still restarts. It has nothing to do with what's currently running just if I bump it, it restarts.
View 3 Replies
View Related
Nov 7, 2008
In System Preferences | Security | General, I have un-ticked the box for 'Require password to unlock each System Preference pane'.The lock still appears on the bottom left and it still prompts me for a password when I try to unlock it in any pref pane.In the pic you can see the box is un-ticked.I'm running 10.5.5
View 1 Replies
View Related
Jun 24, 2009
I bought a used macbook yesterday morning and everything seemed to be working properly at first, but by the end of the day it started having a problem when booting up. 2 gigs of RAM (updated by previous owner)160 gig Hard Drive (updated by previous owner)Everything else is the same as this listing. The problem: when booting up, the screen turns on, but just remains white, without showing the apple logo and spinning circle. I left it like that for a good 10 minutes, and it never continued to boot, it just stayed in that state. I shut it off, then started it in safe mode, which worked fine. From there I restarted it, and it worked normally. The same thing happened again later (white screen, turn off, boot in safe mode, boot normally).
View 8 Replies
View Related
